Mate: use earlyoom instead of systemd-oomd-defaults

Fixing https://pagure.io/releng/failed-composes/issue/2567#comment-737735

Signed-off-by: Mohan Boddu <mboddu@bhujji.com>

README.md

@@ -1,13 +1,15 @@
 # fedora-kickstarts #
 
-This project is used to manage the Fedora kickstart files used in composing Fedora release images. 
+This project is used to manage the Fedora kickstart files used in composing Fedora release images.
 
-The master branch is used by rawhide and each release branch is used by that release. 
+The master branch is used by rawhide and each release branch is used by that release.
 
-All changes should be made via the PR workflow. 
+All changes should be made via the PR workflow.
 
-This project is packaged in Fedora as the spin-kickstarts package allowing users to see 
-and modify the kickstart files for their local needs. 
+This project is packaged in Fedora as the spin-kickstarts package allowing users to see
+and modify the kickstart files for their local needs.
+
+Maintainers for each image are listed in the `maintainers.toml` file.
 
 ## To make a release ##
 
@@ -24,6 +26,18 @@ and modify the kickstart files for their local needs.
     # Clean up the generated files:
     make clean
 
+## Build logs ##
+
+To see build logs go to
+
+https://koji.fedoraproject.org/koji
+
+"Packages" tab, and filter by Fedora-Workstation-Live for example.
+
+Technical info about the officialy released images can be found at
+
+https://kojipkgs.fedoraproject.org/compose/
+
 # bug reports #
 
 Bugs should be reported to the spin-kickstarts bugzilla component:

fedora-arm-base.ks

@@ -1,78 +0,0 @@
-#keyboard us
-lang en_US.UTF-8
-selinux --enforcing
-firewall --enabled --service=mdns,ssh
-
-bootloader --location=mbr
-
-part /boot/efi --size=80 --fstype vfat --asprimary
-part /boot --size=512 --fstype ext4 --asprimary
-
-# make sure that initial-setup runs and lets us do all the configuration bits
-firstboot --reconfig
-
-services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup,zram-swap
-
-%include fedora-repo.ks
-
-%packages
-@core
-@standard
-@hardware-support
-zram
-
-kernel
-# remove this in %post
-dracut-config-generic
--dracut-config-rescue
-# install tools needed to manage and boot arm systems
-@arm-tools
--uboot-images-armv8
-rng-tools
-chrony
-extlinux-bootloader
-bcm283x-firmware
-initial-setup
-initial-setup-gui
--iwl*
--ipw*
--usb_modeswitch
-#lets resize / on first boot
-# dracut-modules-growroot
-
-# make sure all the locales are available for inital0-setup and anaconda to work
-glibc-all-langpacks
-%end
-
-%post
-
-# Setup Raspberry Pi firmware
-cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
-cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
-cp -P /usr/share/uboot/rpi_4_32b/u-boot.bin /boot/efi/rpi4-u-boot.bin
-
-# work around for poor key import UI in PackageKit
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm --eval '%{fedora}')
-basearch=armhfp
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
-echo "Packages within this ARM disk image"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# Because memory is scarce resource in most arm systems we are differing from the Fedora
-# default of having /tmp on tmpfs.
-echo "Disabling tmpfs for /tmp."
-systemctl mask tmp.mount
-
-dnf -y remove dracut-config-generic
-
-# Remove machine-id on pre generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end

fedora-arm-kde.ks

@@ -1,9 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-kde-common.ks
-
-part / --size=6300 --fstype ext4
-
-%post
-
-%end

fedora-arm-lxde.ks

@@ -1,9 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-lxde-common.ks
-
-part / --size=4000 --fstype ext4
-
-%post
-
-%end

fedora-arm-lxqt.ks

@@ -1,14 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-lxqt-common.ks
-
-part / --size=4400 --fstype ext4 --asprimary
-
-%packages
-# trojita not available on non-x86 platforms
--trojita
-%end
-
-%post
-
-%end

fedora-arm-mate.ks

@@ -1,9 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-mate-common.ks
-
-part / --size=7168 --fstype ext4
-
-%post
-
-%end

fedora-arm-minimal.ks

@@ -1,8 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-minimal-common.ks
-
-part / --size=1400 --fstype ext4
-
-%packages
--xkeyboard-config
-%end

fedora-arm-python-classroom.ks

@@ -1,8 +0,0 @@
-# Maintained by the Fedora Python SIG:
-# http://fedoraproject.org/wiki/SIGs/Python
-# mailto:python-devel@lists.fedoraproject.org
-
-# The ARM Workstion based Python Classroom Lab
-
-%include fedora-arm-workstation.ks
-%include fedora-python-classroom-gnome-common.ks

fedora-arm-server.ks

@@ -1,29 +0,0 @@
-%include fedora-arm-base.ks
-
-# server defaults to xfs for / so lets do so on arm also
-part / --size=2500 --fstype xfs
-
-%packages
-# install the default groups for the server environment since installing the environment is not working
-@server-product
-@standard
-@headless-management
-@hardware-support
-@networkmanager-submodules
-
-@container-management
-@domain-client
--initial-setup-gui
--generic-release*
-%end
-
-%post
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-%end
-

fedora-arm-soas.ks

@@ -1,9 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-soas-common.ks
-
-part / --size=3300 --fstype ext4 --asprimary
-
-%post
-
-%end

fedora-arm-workstation.ks

@@ -1,19 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-workstation-common.ks
-
-part / --size=6200 --fstype ext4
-
-%packages
--initial-setup
--initial-setup-gui
--libvirt*
--gnome-boxes
-
-%end
-
-%post
-# Most of the ARM X accelerated drivers need some level of CMA allocation
-sed -i 's/\(append .*\)/\1 cma=256MB/' /boot/extlinux/extlinux.conf
-
-%end

fedora-arm-xbase.ks

@@ -1,17 +0,0 @@
-%packages
-@base-x
-@fonts
-@input-methods
-@multimedia
-@printing
-epiphany
-%end
-
-%post
-# Most of the ARM X accelerated drivers need some level of CMA allocation
-sed -i 's/\(append .*\)/\1 cma=192MB/' /boot/extlinux/extlinux.conf
-
-# Explicitly set graphical.target as default as this is how initial-setup detects which version to run
-ln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.target
-
-%end

fedora-arm-xfce.ks

@@ -1,9 +0,0 @@
-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-xfce-common.ks
-
-part / --size=5000 --fstype ext4
-
-%post
-
-%end

fedora-cinnamon-common.ks

@@ -8,12 +8,16 @@
 
 %packages
 
-@networkmanager-submodules
-@cinnamon-desktop
+fedora-release-cinnamon
+
+# install env-group to resolve RhBug:1891500
+@^cinnamon-desktop-environment
+
 @libreoffice
 parole
+rhythmbox
 
 # extra backgrounds
-f32-backgrounds-extras-gnome
+f34-backgrounds-extras-gnome
 
 %end

fedora-cloud-atomic-pxetolive.ks

@@ -1,36 +0,0 @@
-# PXE-to-Live Atomic: PXE boot directly into a running Atomic Host
-# https://fedoraproject.org/wiki/Changes/AtomicHost
-
-lang en_US.UTF-8
-keyboard us
-timezone America/New_York
-zerombr
-clearpart --all --initlabel
-rootpw --lock --iscrypted locked
-user --name=none
-bootloader --timeout=1
-network --bootproto=dhcp --device=link --activate
-# We are only able to install atomic with separate /boot partition currently
-part / --fstype="ext4" --size=6000
-part /boot --size=500 --fstype="ext4"
-shutdown
-services --disabled=docker-storage-setup
-services --enabled=NetworkManager,sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
- 
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/22/ --ref=fedora-atomic/f22/x86_64/docker-host
- 
-%post
-
-# Ensure the root password is locked, we use cloud-init
-passwd -l root
-userdel -r none
-
-# We copy content of separate /boot partition to root part when building live squashfs image,
-# and we don't want systemd to try to mount it when pxe booting
-cat /dev/null > /etc/fstab
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794
-/sbin/chkconfig network off
-
-%end

fedora-cloud-base-gcp.ks

@@ -0,0 +1,28 @@
+# This is a basic Fedora cloud spin designed to work with GCP.
+# Note that GCP prefers UEFI so we'll need to make sure this image
+# is created from a machine that is started in UEFI mode.
+
+# Inherit from cloud base
+%include fedora-cloud-base.ks
+
+# Change serial port configuration to recommended default for GCP (ttyS0,38400n8d)
+# Don't show bootloader as it's impossible for the user to get to it in time
+# So we might as well not waste the 1 second on each boot.
+# https://cloud.google.com/compute/docs/import/import-existing-image
+bootloader --timeout=0 --append="no_timer_check net.ifnames=0 console=ttyS0,38400n8d"
+
+%packages
+# Fedora Cloud Base includes the qemu guest agent. GCP prefers
+# that it not be installed  https://pagure.io/cloud-sig/issue/319
+-qemu-guest-agent
+%end
+
+%post --erroronfail
+cat <<EOF > /etc/NetworkManager/conf.d/gcp-mtu.conf
+# In GCP it is recommended to use 1460 as the MTU.
+# Set it to 1460 for all connections.
+# https://cloud.google.com/network-connectivity/docs/vpn/concepts/mtu-considerations
+[connection]
+ethernet.mtu = 1460
+EOF
+%end

fedora-cloud-base-vagrant.ks

@@ -53,6 +53,12 @@ EOKEYS
 chmod 600 ~vagrant/.ssh/authorized_keys
 chown -R vagrant:vagrant ~vagrant/.ssh/
 
+cat > /etc/ssh/sshd_config.d/10-vagrant-insecure-rsa-key.conf <<EOF
+# For now the vagrant insecure key is an rsa key
+# https://github.com/hashicorp/vagrant/issues/11783
+PubkeyAcceptedKeyTypes=+ssh-rsa
+EOF
+
 # Further suggestion from @purpleidea (James Shubin) - extend key to root users as well
 mkdir -m 0700 -p /root/.ssh
 cp /home/vagrant/.ssh/authorized_keys /root/.ssh/authorized_keys

fedora-cloud-base.ks

@@ -4,9 +4,6 @@
 # keys. Cloud-init creates a user account named "fedora" with passwordless
 # sudo access. The root password is empty and locked by default.
 #
-# Note that unlike the standard Fedora install, this image has /tmp on disk
-# rather than in tmpfs, since memory is usually at a premium.
-#
 # This kickstart file is designed to be used with ImageFactory (in Koji).
 #
 # To do a local build, you'll need to install ImageFactory.  See
@@ -37,7 +34,6 @@ firewall --disabled
 # We pass net.ifnames=0 because we always want to use eth0 here on all the cloud images.
 bootloader --timeout=1 --append="no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
 
-network --bootproto=dhcp --device=link --activate --onboot=on
 services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
 
 zerombr
@@ -48,217 +44,84 @@ autopart --noboot --nohome --noswap --nolvm
 
 reboot
 
-# Package list.
-# FIXME: instLangs does not work, so there's a hack below
-# (see https://bugzilla.redhat.com/show_bug.cgi?id=1051816)
-# FIXME: instLangs bug has been fixed but now having instLangs
-# with an arg causes no langs to get installed because of BZ1262040
-# which yields the errors in BZ1261249. For now fix by not using
-# --instLangs at all
-#%packages --instLangs=en
-%packages
+##### begin package list #############################################
+%packages --instLangs=en
 
-kernel-core
+# Include packages for the cloud-server-environment group
 @^cloud-server-environment
-# Need to pull in the udev subpackage
-systemd-udev
 
-# after move away from grub2 - let's add 'which' back
-which
+# Don't include the kernel toplevel package since it pulls in
+# kernel-modules. We're happy for now with kernel-core.
+-kernel
+kernel-core
 
-# rescue mode generally isn't useful in the cloud context
+# Don't include dracut-config-rescue. It will have dracut generate a
+# "rescue" entry in the grub menu, but that also means there is a
+# rescue kernel and initramfs that get created, which (currently) add
+# about another 40MiB to the /boot/ partition. Also the "rescue" mode
+# is generally not useful in the cloud.
 -dracut-config-rescue
 
-# Some things from @core we can do without in a minimal install
--biosdevname
-# Need to also add back plymouth in order to mask failure of
-# systemd-vconsole-setup.service. BZ#1272684. Comment out for now
-#-plymouth
--iprutils
-# Now that BZ#1199868 is fixed kbd really gets removed but it breaks
-# systemd-vconsole-setup.service on boot. Comment out for now
-#-kbd
--uboot-tools
--kernel
-# No need for plymouth. Also means anaconda won't put rhgb/quiet
-# on kernel command line
+# Plymouth provides a graphical boot animation. In the cloud we don't
+# need a graphical boot animation. This also means anaconda won't put
+# rhgb/quiet on kernel command line
 -plymouth
 
+# Install qemu-guest-agent https://pagure.io/cloud-sig/issue/319 To
+# improve the integration with OpenStack and other VM management
+# systems (oVirt, KubeVirt).
+qemu-guest-agent
+
+
+# No need for firewalld for now. We don't have a firewall on by default.
+-firewalld
+
+# noswap on Cloud for now
+-zram-generator-defaults
+
+# Don't include the geolite2 databases, which end up with 66MiB
+# in /usr/share/GeoIP
+-geolite2-country
+-geolite2-city
 %end
+##### end package list ###############################################
 
 
-
+##### begin kickstart post ###########################################
 %post --erroronfail
 
-# Create grub.conf for EC2. This used to be done by appliance creator but
-# anaconda doesn't do it. And, in case appliance-creator is used, we're
-# overriding it here so that both cases get the exact same file.
-# Note that the console line is different -- that's because EC2 provides
-# different virtual hardware, and this is a convenient way to act differently
-echo -n "Creating grub.conf for pvgrub"
-rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
-mkdir /boot/grub
-echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
-for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
-  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
-  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
-  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
-  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
-  echo
-done
-
-
-#link grub.conf to menu.lst for ec2 to work
-echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
-ln -sf grub.conf /boot/grub/menu.lst
-ln -sf /boot/grub/grub.conf /etc/grub.conf
-
-# older versions of livecd-tools do not follow "rootpw --lock" line above
-# https://bugzilla.redhat.com/show_bug.cgi?id=964299
-passwd -l root
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-# this is installed by default but we don't need it in virt
-# Commenting out the following for #1234504
-# rpm works just fine for removing this, no idea why dnf can't cope
+# linux-firmware is installed by default and is quite large. As of mid 2020:
+#   Total download size: 97 M
+#   Installed size: 268 M
+# So far we've been fine shipping without it so let's continue.
+# More discussion about this in #1234504.
 echo "Removing linux-firmware package."
 rpm -e linux-firmware
 
-# Remove firewalld; was supposed to be optional in F18+, but is pulled in
-# in install/image building.
-echo "Removing firewalld."
-# FIXME! clean_requirements_on_remove is the default with DNF, but may
-# not work when package was installed by Anaconda instead of command line.
-# Also -- check if this is still even needed with new anaconda -- disabled
-# firewall should _not_ pull in this package.
-# dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
-dnf -C -y erase "firewalld*"
-
-# Another one needed at install time but not after that, and it pulls
-# in some unneeded deps (like, newt and slang)
-echo "Removing authconfig."
-dnf -C -y erase authconfig
-
-# instlang hack. (Note! See bug referenced above package list)
-find /usr/share/locale -mindepth  1 -maxdepth 1 -type d -not -name en_US -exec rm -rf {} +
-localedef --list-archive | grep -v ^en_US | xargs localedef --delete-from-archive
-# this will kill a live system (since it's memory mapped) but should be safe offline
-mv -f /usr/lib/locale/locale-archive /usr/lib/locale/locale-archive.tmpl
-build-locale-archive
-echo '%_install_langs C:en:en_US:en_US.UTF-8' >> /etc/rpm/macros.image-language-conf
-
-
-echo -n "Getty fixes"
-# although we want console output going to the serial console, we don't
-# actually have the opportunity to login there. FIX.
-# we don't really need to auto-spawn _any_ gettys.
-sed -i '/^#NAutoVTs=.*/ a\
-NAutoVTs=0' /etc/systemd/logind.conf
-
-echo -n "Network fixes"
-# initscripts don't like this file to be missing.
-# and https://bugzilla.redhat.com/show_bug.cgi?id=1204612
-cat > /etc/sysconfig/network << EOF
-NETWORKING=yes
-NOZEROCONF=yes
-DEVTIMEOUT=10
-EOF
-
-# simple eth0 config, again not hard-coded to the build hardware
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-
-# generic localhost names
-cat > /etc/hosts << EOF
-127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
-
-EOF
-echo .
-
-
-# Because memory is scarce resource in most cloud/virt environments,
-# and because this impedes forensics, we are differing from the Fedora
-# default of having /tmp on tmpfs.
-echo "Disabling tmpfs for /tmp."
-systemctl mask tmp.mount
-
-# make sure firstboot doesn't start
-echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
-
-# Uncomment this if you want to use cloud init but suppress the creation
-# of an "ec2-user" account. This will, in the absence of further config,
-# cause the ssh key from a metadata source to be put in the root account.
-#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
-#users: []
-#disable_root: 0
-#EOF
-
+# See the systemd-random-seed.service man page that says:
+#   " It is recommended to remove the random seed from OS images intended
+#     for replication on multiple systems"
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/systemd/random-seed
 
-echo "Cleaning old dnf repodata."
-# FIXME: clear history?
-dnf clean all
-truncate -c -s 0 /var/log/dnf.log
-truncate -c -s 0 /var/log/dnf.rpm.log
-
 echo "Import RPM GPG key"
 releasever=$(rpm --eval '%{fedora}')
 basearch=$(uname -i)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
 
-echo "Packages within this cloud image:"
-echo "-----------------------------------------------------------------------"
-rpm -qa
-echo "-----------------------------------------------------------------------"
-# Note that running rpm recreates the rpm db files which aren't needed/wanted
-rm -f /var/lib/rpm/__db*
-
-# FIXME: is this still needed?
-echo "Fixing SELinux contexts."
-touch /var/log/cron
-touch /var/log/boot.log
-# ignore return code because UEFI systems with vfat filesystems
-# that don't support selinux will give us errors
-/usr/sbin/fixfiles -R -a restore || true
-
 echo "Zeroing out empty space."
 # This forces the filesystem to reclaim space from deleted files
 dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
 rm -f /var/tmp/zeros
 echo "(Don't worry -- that out-of-space error was expected.)"
 
-# When we build the image with oz, dracut is used
-# and sets up a ifcfg-en<whatever> for the device. We don't
-# want to use this, we use eth0 so it is always the same.
-# So we remove all these ifcfg-en<whatever> devices so
-# The 'network' service can come up cleanly.
-rm -f /etc/sysconfig/network-scripts/ifcfg-en*
+# When we build the image a networking config file gets left behind.
+# Let's clean it up.
+echo "Cleanup leftover networking configuration"
+rm -f /etc/NetworkManager/system-connections/*.nmconnection
 
-# Enable network service here, as doing it in the services line
-# fails due to RHBZ #1369794
-/sbin/chkconfig network on
-
-# Remove machine-id on pre generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-# Anaconda is writing an /etc/resolv.conf from the install environment.
-# The system should start out with an empty file, otherwise cloud-init
-# will try to use this information and may error:
-# https://bugs.launchpad.net/cloud-init/+bug/1670052
-truncate -s 0 /etc/resolv.conf
+# Clear machine-id on pre generated images
+truncate -s 0 /etc/machine-id
 
 %end
-
+##### end kickstart post ############################################

fedora-cloud-bigdata.ks

@@ -1,220 +0,0 @@
-# This is a Fedora 21 spin designed based on the Fedora Cloud Base Image
-# but tailored specifically for Big Data processing out-of-the-box.
-# Primarily, it builds on that image but adds extra packages, but over
-# time may have additional focus.
-#
-# It's configured with cloud-init so it will take advantage of
-# ec2-compatible metadata services for provisioning ssh keys. Cloud-init
-# creates a user account named "fedora" with passwordless sudo access. The
-# root password is empty and locked by default.
-#
-# Note that unlike the standard F20 install, this image has /tmp on disk
-# rather than in tmpfs, since memory is usually at a premium.
-
-text
-lang en_US.UTF-8
-keyboard us
-timezone --utc Etc/UTC
-
-selinux --enforcing
-rootpw --lock --iscrypted locked
-user --name=none
-
-firewall --disabled
-
-bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
-
-network --bootproto=dhcp --device=eth0 --activate --onboot=on
-services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
-
-zerombr
-clearpart --all
-part / --size 3000 --fstype ext4
-
-%include fedora-repo.ks
-
-
-reboot
-
-# Package list.
-%packages
-
-fedora-release-cloud
-
-kernel-core
-@core
-@cloud-server
-
-# Needed initially, but removed below.
-firewalld
-
-# rescue mode generally isn't useful in the cloud context
--dracut-config-rescue
-
-# Some things from @core we can do without in a minimal install
--biosdevname
--plymouth
--NetworkManager
--iprutils
--kbd
--uboot-tools
--kernel
--grub2
-
-%end
-
-
-
-%post --erroronfail
-
-# Create grub.conf for EC2. This used to be done by appliance creator but
-# anaconda doesn't do it. And, in case appliance-creator is used, we're
-# overriding it here so that both cases get the exact same file.
-# Note that the console line is different -- that's because EC2 provides
-# different virtual hardware, and this is a convenient way to act differently
-echo -n "Creating grub.conf for pvgrub"
-rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
-mkdir /boot/grub
-echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
-for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
-  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
-  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
-  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
-  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
-  echo
-done
-
-
-#link grub.conf to menu.lst for ec2 to work
-echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
-ln -sf grub.conf /boot/grub/menu.lst
-ln -sf /boot/grub/grub.conf /etc/grub.conf
-
-# older versions of livecd-tools do not follow "rootpw --lock" line above
-# https://bugzilla.redhat.com/show_bug.cgi?id=964299
-passwd -l root
-# remove the user anaconda forces us to make
-userdel -r none
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-# this is installed by default but we don't need it in virt
-# Commenting out the following for #1234504
-# rpm works just fine for removing this, no idea why dnf can't cope
-echo "Removing linux-firmware package."
-rpm -e linux-firmware
-
-# Remove firewalld; was supposed to be optional in F18+, but is required to
-# be present for install/image building.
-echo "Removing firewalld."
-dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
-
-# Another one needed at install time but not after that, and it pulls
-# in some unneeded deps (like, newt and slang)
-echo "Removing authconfig."
-dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
-
-echo -n "Getty fixes"
-# although we want console output going to the serial console, we don't
-# actually have the opportunity to login there. FIX.
-# we don't really need to auto-spawn _any_ gettys.
-sed -i '/^#NAutoVTs=.*/ a\
-NAutoVTs=0' /etc/systemd/logind.conf
-
-echo -n "Network fixes"
-# initscripts don't like this file to be missing.
-cat > /etc/sysconfig/network << EOF
-NETWORKING=yes
-NOZEROCONF=yes
-EOF
-
-# For cloud images, 'eth0' _is_ the predictable device name, since
-# we don't want to be tied to specific virtual (!) hardware
-rm -f /etc/udev/rules.d/70*
-ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
-
-# simple eth0 config, again not hard-coded to the build hardware
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-
-# generic localhost names
-cat > /etc/hosts << EOF
-127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
-
-EOF
-echo .
-
-
-# Because memory is scarce resource in most cloud/virt environments,
-# and because this impedes forensics, we are differing from the Fedora
-# default of having /tmp on tmpfs.
-echo "Disabling tmpfs for /tmp."
-systemctl mask tmp.mount
-
-# make sure firstboot doesn't start
-echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
-
-# Uncomment this if you want to use cloud init but suppress the creation
-# of an "ec2-user" account. This will, in the absence of further config,
-# cause the ssh key from a metadata source to be put in the root account.
-#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
-#users: []
-#disable_root: 0
-#EOF
-
-echo "Removing random-seed so it's not the same in every image."
-rm -f /var/lib/systemd/random-seed
-
-echo "Cleaning old dnf repodata."
-dnf history new
-dnf clean all
-truncate -c -s 0 /var/log/dnf.log
-
-echo "Import RPM GPG key"
-releasever=$(rpm --eval '%{fedora}')
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
-
-echo "Packages within this cloud image:"
-echo "-----------------------------------------------------------------------"
-rpm -qa
-echo "-----------------------------------------------------------------------"
-# Note that running rpm recreates the rpm db files which aren't needed/wanted
-rm -f /var/lib/rpm/__db*
-
-# This is a temporary workaround for
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
-# where sfdisk seems to be messing up the mbr.
-# Long-term fix is to address this in anaconda directly and remove this.
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
-dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
-
-
-echo "Fixing SELinux contexts."
-touch /var/log/cron
-touch /var/log/boot.log
-mkdir -p /var/cache/dnf
-/usr/sbin/fixfiles -R -a restore
-
-echo "Zeroing out empty space."
-# This forces the filesystem to reclaim space from deleted files
-dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
-rm -f /var/tmp/zeros
-echo "(Don't worry -- that out-of-space error was expected.)"
-
-# Enable network service here, as doing it in the services line
-# fails due to RHBZ #1369794
-/sbin/chkconfig network on
-
-%end
-

fedora-cloud-experimental.ks

@@ -1,215 +0,0 @@
-# This is a spin of the Fedora cloud image designed for trying out new
-# images in rawhide. It won't be built for non-rawhide trees, let alone
-# actual releases.
-
-cmdline
-lang en_US.UTF-8
-keyboard us
-timezone --utc Etc/UTC
-
-auth --useshadow --passalgo=sha512
-selinux --enforcing
-rootpw --lock --iscrypted locked
-user --name=none
-
-firewall --disabled
-
-bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
-
-network --bootproto=dhcp --device=eth0 --activate --onboot=on
-services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
-
-zerombr
-clearpart --all
-part / --size 3000 --fstype ext4
-
-%include fedora-repo.ks
-
-
-reboot
-
-# Package list.
-%packages --excludedocs --instLangs=en_US
-
-fedora-release-cloud
-
-kernel-core
-@core
-@cloud-server
-
-# rescue mode generally isn't useful in the cloud context
--dracut-config-rescue
-
-# Needed initially, but removed below.
-firewalld
-
-# Some things from @core we can do without in a minimal install
--biosdevname
--plymouth
--NetworkManager
--iprutils
--kbd
--uboot-tools
--kernel
--grub2
-
-%end
-
-
-
-%post --erroronfail
-
-# Create grub.conf for EC2. This used to be done by appliance creator but
-# anaconda doesn't do it. And, in case appliance-creator is used, we're
-# overriding it here so that both cases get the exact same file.
-# Note that the console line is different -- that's because EC2 provides
-# different virtual hardware, and this is a convenient way to act differently
-echo -n "Creating grub.conf for pvgrub"
-rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
-mkdir /boot/grub
-echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
-for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
-  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
-  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
-  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
-  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
-  echo
-done
-
-
-#link grub.conf to menu.lst for ec2 to work
-echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
-ln -sf grub.conf /boot/grub/menu.lst
-ln -sf /boot/grub/grub.conf /etc/grub.conf
-
-# older versions of livecd-tools do not follow "rootpw --lock" line above
-# https://bugzilla.redhat.com/show_bug.cgi?id=964299
-passwd -l root
-# remove the user anaconda forces us to make
-userdel -r none
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-# this is installed by default but we don't need it in virt
-# Commenting out the following for #1234504
-# rpm works just fine for removing this, no idea why dnf can't cope
-echo "Removing linux-firmware package."
-rpm -e linux-firmware
-
-# Remove firewalld; was supposed to be optional in F18+, but is required to
-# be present for install/image building.
-echo "Removing firewalld."
-dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
-
-# Another one needed at install time but not after that, and it pulls
-# in some unneeded deps (like, newt and slang)
-echo "Removing authconfig."
-dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
-
-echo -n "Getty fixes"
-# although we want console output going to the serial console, we don't
-# actually have the opportunity to login there. FIX.
-# we don't really need to auto-spawn _any_ gettys.
-sed -i '/^#NAutoVTs=.*/ a\
-NAutoVTs=0' /etc/systemd/logind.conf
-
-echo -n "Network fixes"
-# initscripts don't like this file to be missing.
-cat > /etc/sysconfig/network << EOF
-NETWORKING=yes
-NOZEROCONF=yes
-EOF
-
-# For cloud images, 'eth0' _is_ the predictable device name, since
-# we don't want to be tied to specific virtual (!) hardware
-rm -f /etc/udev/rules.d/70*
-ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
-
-# simple eth0 config, again not hard-coded to the build hardware
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-
-# generic localhost names
-cat > /etc/hosts << EOF
-127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
-
-EOF
-echo .
-
-
-# Because memory is scarce resource in most cloud/virt environments,
-# and because this impedes forensics, we are differing from the Fedora
-# default of having /tmp on tmpfs.
-echo "Disabling tmpfs for /tmp."
-systemctl mask tmp.mount
-
-# make sure firstboot doesn't start
-echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
-
-# Uncomment this if you want to use cloud init but suppress the creation
-# of an "ec2-user" account. This will, in the absence of further config,
-# cause the ssh key from a metadata source to be put in the root account.
-#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
-#users: []
-#disable_root: 0
-#EOF
-
-echo "Removing random-seed so it's not the same in every image."
-rm -f /var/lib/systemd/random-seed
-
-echo "Cleaning old dnf repodata."
-dnf history new
-dnf clean all
-truncate -c -s 0 /var/log/dnf.log
-
-echo "Import RPM GPG key"
-releasever=$(rpm --eval '%{fedora}')
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
-
-echo "Packages within this cloud image:"
-echo "-----------------------------------------------------------------------"
-rpm -qa
-echo "-----------------------------------------------------------------------"
-# Note that running rpm recreates the rpm db files which aren't needed/wanted
-rm -f /var/lib/rpm/__db*
-
-
-# This is a temporary workaround for
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
-# where sfdisk seems to be messing up the mbr.
-# Long-term fix is to address this in anaconda directly and remove this.
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
-dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
-
-
-echo "Fixing SELinux contexts."
-touch /var/log/cron
-touch /var/log/boot.log
-mkdir -p /var/cache/dnf
-chattr -i /boot/extlinux/ldlinux.sys
-/usr/sbin/fixfiles -R -a restore
-chattr +i /boot/extlinux/ldlinux.sys
-
-echo "Zeroing out empty space."
-# This forces the filesystem to reclaim space from deleted files
-dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
-rm -f /var/tmp/zeros
-echo "(Don't worry -- that out-of-space error was expected.)"
-
-# Enable network service here, as doing it in the services line
-# fails due to RHBZ #1369794
-/sbin/chkconfig network on
-
-%end
-

fedora-comp-neuro-common.ks

@@ -1,19 +1,16 @@
 # Description: Packages for the NeuroFedora computational neuroscience lab image.
-# 
+#
 # Maintained by the NeuroFedora SIG:
-# https://fedoraproject.org/wiki/SIGs/NeuroFedora
+# https://neuro.fedoraproject.org
 # mailto:neuro-sig@lists.fedoraproject.org
 
 %packages
-
+fedora-release-compneuro
 # Includes numpy, scipy, jupyter, pandas, scikit, scipy, statsmodels, sympy, matplotlib
 @python-science
 
-# Add julia and R
-R
-julia
-
 #Computational neuroscience packages
+arbor
 auryn-mpich
 auryn-openmpi
 bionetgen
@@ -26,22 +23,24 @@ gnuplot
 moose
 nest
 neuron
-neurord
+neuron-devel
 octave
 paraview
 python3
 python3-brian2
-python-brian2-doc
 python3-ipython
 python3-nest
+python3-netpyne
 python3-neuron
+python3-niapy
 python3-libNeuroML
 python3-neo
-# Currently broken in rawhide
-# python3-nineml
-# python-nineml-doc
 python3-PyLEMS
-python-PyLEMS-doc
+python3-pynn
+python3-steps
 smoldyn
 
+# Orphaned
+# python3-nineml
+
 %end

fedora-container-base.ks

@@ -14,7 +14,6 @@ dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
 sssd-client
 sudo
 -glibc-langpack-en
--cracklib-dicts
 -langpacks-en
 %end
 
@@ -26,11 +25,6 @@ rm -rf /tmp/*
 # https://pagure.io/atomic-wg/issue/308
 printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
 
-# https://bugzilla.redhat.com/show_bug.cgi?id=1576993
-systemctl disable dnf-makecache.timer
-
-#Mask mount units and getty service so that we don't get login prompt
-systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service
 
 # https://bugzilla.redhat.com/show_bug.cgi?id=1343138
 # Fix /run/lock breakage since it's not tmpfs in docker
@@ -44,7 +38,6 @@ systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connec
 #   [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
 #
 umount /run
-systemd-tmpfiles --prefix=/run/ --prefix=/var/run/ --create --boot || true
 rm /run/nologin # https://pagure.io/atomic-wg/issue/316
 
 # Final pruning

fedora-container-common.ks

@@ -38,8 +38,6 @@ rpm
 shadow-utils
 sssd-client
 util-linux
-# needed by Anaconda https://bugzilla.redhat.com/show_bug.cgi?id=1744115
-systemd
 -kernel
 -dosfstools
 -e2fsprogs

fedora-design-suite-common.ks

@@ -0,0 +1,32 @@
+%packages
+# Switch to groups for design suite
+@design-suite
+
+# Identify as Fedora Design Suite
+fedora-release-designsuite
+
+# Provides backup application
+deja-dup
+deja-dup-nautilus
+
+# Add extra gnome applications
+gnome-books
+gnome-calendar
+gnome-photos
+gnome-shell-extension-pomodoro
+gnome-todo
+
+# Add cosmetic for terminal
+powerline
+powerline-fonts
+
+# removal of unneeded applications
+-gnome-boxes
+-eog
+
+# temporarily removing conflicting application
+-mypaint
+-sparkleshare
+-blender-luxcorerender
+
+%end

fedora-disk-base.ks

@@ -13,7 +13,7 @@ keyboard us
 timezone US/Eastern
 selinux --enforcing
 firewall --enabled --service=mdns
-services --enabled=sshd,NetworkManager,chronyd,zram-swap
+services --enabled=sshd,NetworkManager,chronyd
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -32,16 +32,15 @@ firstboot --reconfig
 @core
 @standard
 @hardware-support
-zram
 
 kernel
+# on 32bit arm make sure we only install one kernel
+-kernel-lpae
 # remove this in %post
 dracut-config-generic
 -dracut-config-rescue
 # install tools needed to manage and boot arm systems
 @arm-tools
--uboot-images-armv7
-rng-tools
 chrony
 bcm283x-firmware
 initial-setup
@@ -51,23 +50,32 @@ initial-setup
 -usb_modeswitch
 -generic-release*
 
-# make sure all the locales are available for inital0-setup and anaconda to work
+# make sure all the locales are available for inital-setup and anaconda to work
 glibc-all-langpacks
 
 %end
 
 %post
 
+# Find the architecture we are on
+arch=$(uname -m)
+
 # Setup Raspberry Pi firmware
+if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
+if [[ $arch == "aarch64" ]]; then
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
+else
+cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
+cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
+cp -P /usr/share/uboot/rpi_4_32b/u-boot.bin /boot/efi/rpi4-u-boot.bin
+fi
+fi
 
 releasever=$(rpm --eval '%{fedora}')
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 echo "Packages within this disk image"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
+rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
 
 # remove random seed, the newly installed instance should make it's own
 rm -f /var/lib/systemd/random-seed
@@ -77,12 +85,11 @@ rm -f /etc/sysconfig/network-scripts/ifcfg-enp1s0
 
 dnf -y remove dracut-config-generic
 
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794
-/sbin/chkconfig network off
-
 # Remove machine-id on pre generated images
 rm -f /etc/machine-id
 touch /etc/machine-id
 
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
 %end

fedora-disk-kde.ks

@@ -0,0 +1,5 @@
+%include fedora-disk-base.ks
+%include fedora-disk-xbase.ks
+%include fedora-kde-common.ks
+
+autopart --type=btrfs --noswap

fedora-disk-minimal.ks

@@ -1,10 +1,6 @@
 %include fedora-disk-base.ks
 %include fedora-minimal-common.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
+services --enabled=sshd,NetworkManager,chronyd,initial-setup
 
 autopart --type=plain --noswap
-
-%packages
--xkeyboard-config
-%end

fedora-disk-python-classroom.ks

@@ -0,0 +1,20 @@
+# Maintained by the Fedora Python SIG:
+# http://fedoraproject.org/wiki/SIGs/Python
+# mailto:python-devel@lists.fedoraproject.org
+
+# The Workstion based Python Classroom Lab
+
+%include fedora-disk-base.ks
+%include fedora-disk-xbase.ks
+%include fedora-workstation-common.ks
+%include fedora-python-classroom-gnome-common.ks
+
+autopart --type=btrfs --noswap
+
+%packages
+-initial-setup
+-initial-setup-gui
+-libvirt*
+-gnome-boxes
+
+%end

fedora-disk-server.ks

@@ -1,10 +1,11 @@
 %include fedora-disk-base.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
+services --enabled=sshd,NetworkManager,chronyd,initial-setup
 
 autopart --noswap
 
 %packages
+fedora-release-server
 # install the default groups for the server environment since installing the environment is not working
 @server-product
 @standard

fedora-disk-soas.ks

@@ -0,0 +1,5 @@
+%include fedora-disk-base.ks
+%include fedora-disk-xbase.ks
+%include fedora-soas-common.ks
+
+autopart --type=btrfs --noswap

fedora-disk-workstation.ks

@@ -2,18 +2,10 @@
 %include fedora-disk-xbase.ks
 %include fedora-workstation-common.ks
 
-bootloader --append="cma=256MB"
-
-services --enabled=sshd,NetworkManager,chronyd,zram-swap
-
-autopart --type=plain --noswap
+autopart --type=btrfs --noswap
 
 %packages
 -initial-setup
 -initial-setup-gui
 
 %end
-
-%post
-
-%end

fedora-disk-xbase.ks

@@ -5,6 +5,7 @@
 @multimedia
 @printing
 -@guest-desktop-agents
+initial-setup-gui
 
 # Need aajohan-comfortaa-fonts for the SVG rnotes images
 aajohan-comfortaa-fonts

fedora-disk-xfce.ks

@@ -2,16 +2,4 @@
 %include fedora-disk-xbase.ks
 %include fedora-xfce-common.ks
 
-bootloader --append="cma=192MB"
-
-services --enabled=sshd,NetworkManager,chronyd,zram-swap
-
-autopart --type=plain --noswap
-
-%packages
-
-%end
-
-%post
-
-%end
+autopart --type=btrfs --noswap

fedora-eln-container-base.ks

@@ -0,0 +1,112 @@
+# See fedora-container-common.ks for details on how to hack on container image kickstarts
+# This base is a standard Fedora-ELN image with python3 and dnf
+
+text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
+bootloader --disabled
+timezone --isUtc --nontp Etc/UTC
+rootpw --lock --iscrypted locked
+keyboard us
+network --bootproto=dhcp --device=link --activate --onboot=on
+reboot
+
+# boot partitions are irrelevant as the final docker image is a tarball
+zerombr
+clearpart --all
+autopart --noboot --nohome --noswap --nolvm
+
+%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
+fedora-release-eln
+dnf-plugins-core
+fedora-repos-eln
+bash
+coreutils
+glibc-minimal-langpack
+rpm
+shadow-utils
+sssd-client
+util-linux
+-kernel
+-dosfstools
+-e2fsprogs
+-fuse-libs
+-gnupg2-smime
+-libss # used by e2fsprogs
+-pinentry
+-shared-mime-info
+-trousers
+-xkeyboard-config
+-grubby
+
+rootfiles
+tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
+vim-minimal
+dnf
+yum  # DNF compatibility with yum
+sssd-client
+sudo
+-glibc-langpack-en
+-cracklib-dicts
+-langpacks-en
+%end
+
+%post --erroronfail --log=/root/anaconda-post.log
+set -eux
+
+# Set install langs macro so that new rpms that get installed will
+# only install langs that we limit it to.
+LANG="en_US"
+echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf
+
+# https://bugzilla.redhat.com/show_bug.cgi?id=1727489
+echo 'LANG="C.UTF-8"' >  /etc/locale.conf
+
+# https://bugzilla.redhat.com/show_bug.cgi?id=1400682
+echo "Import RPM GPG key"
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-33-primary /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-34-primary
+
+# Disable conflicting repositories.
+dnf config-manager --disable "*rawhide*" "*cisco*"
+
+echo "# fstab intentionally empty for containers" > /etc/fstab
+
+# Remove machine-id on pre generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+# remove some extraneous files
+rm -rf /var/cache/dnf/*
+rm -rf /tmp/*
+
+# https://pagure.io/atomic-wg/issue/308
+printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
+
+
+# https://bugzilla.redhat.com/show_bug.cgi?id=1343138
+# Fix /run/lock breakage since it's not tmpfs in docker
+# This unmounts /run (tmpfs) and then recreates the files
+# in the /run directory on the root filesystem of the container
+#
+# We ignore the return code of the systemd-tmpfiles command because
+# at this point we have already removed the /etc/machine-id and all
+# tmpfiles lines with %m in them will fail and cause a bad return
+# code. Example failure:
+#   [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
+#
+umount /run
+
+# Final pruning
+rm -rfv /var/cache/* /var/log/* /tmp/*
+
+%end
+
+%post --nochroot --erroronfail --log=/mnt/sysimage/root/anaconda-post-nochroot.log
+set -eux
+
+# See: https://bugzilla.redhat.com/show_bug.cgi?id=1051816
+# NOTE: run this in nochroot because "find" does not exist in chroot
+KEEPLANG=en_US
+for dir in locale i18n; do
+    find /mnt/sysimage/usr/share/${dir} -mindepth  1 -maxdepth 1 -type d -not \( -name "${KEEPLANG}" -o -name POSIX \) -exec rm -rfv {} +
+done
+
+%end

fedora-eln-guest.ks

@@ -0,0 +1,252 @@
+# Kickstart file to build Fedora ELN Guest image.
+# This image is used to test Fedora ELN content for
+# the cloud instances. This image provides minimally configured
+# system image.
+
+text
+lang en_US.UTF-8
+keyboard us
+timezone --utc America/New_York
+# add console and reorder in %post
+bootloader --timeout=1 --location=mbr --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
+auth --enableshadow --passalgo=sha512
+selinux --enforcing
+firewall --enabled --service=ssh
+network --bootproto=dhcp --device=link --activate --onboot=on
+#services --enabled=sshd,ovirt-guest-agent --disabled kdump,rhsmcertd
+services --enabled=sshd,NetworkManager,cloud-init,cloud-init-local,cloud-config,cloud-final --disabled kdump,rhsmcertd
+rootpw --iscrypted nope
+
+#
+# Partition Information. Change this as necessary
+# This information is used by appliance-tools but
+# not by the livecd tools.
+#
+zerombr
+clearpart --all --initlabel
+# autopart --type=plain --nohome # --nohome doesn't work because of rhbz#1509350
+# autopart is problematic in that it creates /boot and swap partitions rhbz#1542510 rhbz#1673094
+reqpart
+part / --fstype="xfs" --ondisk=vda --size=8000
+reboot
+
+# Packages
+%packages
+@core
+dnf
+kernel
+yum
+nfs-utils
+dnf-utils
+
+# pull firmware packages out
+-aic94xx-firmware
+-alsa-firmware
+-alsa-lib
+-alsa-tools-firmware
+-ivtv-firmware
+-iwl1000-firmware
+-iwl100-firmware
+-iwl105-firmware
+-iwl135-firmware
+-iwl2000-firmware
+-iwl2030-firmware
+-iwl3160-firmware
+-iwl3945-firmware
+-iwl4965-firmware
+-iwl5000-firmware
+-iwl5150-firmware
+-iwl6000-firmware
+-iwl6000g2a-firmware
+-iwl6000g2b-firmware
+-iwl6050-firmware
+-iwl7260-firmware
+-libertas-sd8686-firmware
+-libertas-sd8787-firmware
+-libertas-usb8388-firmware
+
+# cloud-init does magical things with EC2 metadata, including provisioning
+# a user account with ssh keys.
+cloud-init
+## Adding a dependency for cloud-init as recommended by tdawson
+python3-jsonschema
+
+# rhevm guest-agent (Not available in ELN yet)
+#rhevm-guest-agent-common
+
+# allows the host machine to issue commands to the guest operating system
+qemu-guest-agent
+
+# need this for growpart, because parted doesn't yet support resizepart
+# https://bugzilla.redhat.com/show_bug.cgi?id=966993
+#cloud-utils
+
+#heat-cfntools  # Not available in ELN (yet?)
+
+cloud-utils-growpart
+# We need this image to be portable; also, rescue mode isn't useful here.
+dracut-config-generic
+
+# Don't include dracut-config-rescue. It will have dracut generate a
+# "rescue" entry in the grub menu, but that also means there is a
+# rescue kernel and initramfs that get created, which (currently) add
+# about another 40MiB to the /boot/ partition. Also the "rescue" mode
+# is generally not useful in the cloud.
+-dracut-config-rescue
+
+# Needed initially, but removed below.
+firewalld
+
+# cherry-pick a few things from @base
+tar
+tcpdump
+rsync
+
+# Some things from @core we can do without in a minimal install
+-biosdevname
+-plymouth
+-iprutils
+
+# Minimal Cockpit web console
+cockpit-ws
+cockpit-system
+subscription-manager-cockpit
+
+# rh-amazon-rhui-client
+
+# Exclude all langpacks for now
+-langpacks-*
+
+# The langpacks-en package is pulled in by Anaconda and it seems filtering
+# it out using langpacks-* is not sufficient. It needs to be filtered
+# directly.
+-langpacks-en
+
+# We are building Fedora-ELN
+fedora-release
+fedora-repos
+
+# Add rng-tools as source of entropy
+# TODO: Not available in Fedora-ELN yet.
+# rng-tools
+
+%end
+
+#
+# Add custom post scripts after the base post.
+#
+%post --erroronfail
+
+# workaround anaconda requirements
+passwd -d root
+passwd -l root
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# this is installed by default but we don't need it in virt
+echo "Removing linux-firmware package."
+dnf -C -y remove linux-firmware
+
+# Remove firewalld; it is required to be present for install/image building.
+echo "Removing firewalld."
+dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+
+echo -n "Getty fixes"
+# although we want console output going to the serial console, we don't
+# actually have the opportunity to login there. FIX.
+# we don't really need to auto-spawn _any_ gettys.
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules
+rm -f /etc/sysconfig/network-scripts/ifcfg-*
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+BOOTPROTOv6="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+USERCTL="yes"
+PEERDNS="yes"
+IPV6INIT="yes"
+PERSISTENT_DHCLIENT="1"
+EOF
+
+# set virtual-guest as default profile for tuned
+echo "virtual-guest" > /etc/tuned/active_profile
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+cat <<EOL > /etc/sysconfig/kernel
+# UPDATEDEFAULT specifies if new-kernel-pkg should make
+# new kernels the default
+UPDATEDEFAULT=yes
+
+# DEFAULTKERNEL specifies the default kernel package type
+DEFAULTKERNEL=kernel
+EOL
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# workaround https://bugzilla.redhat.com/show_bug.cgi?id=966888
+if ! grep -q growpart /etc/cloud/cloud.cfg; then
+  sed -i 's/ - resizefs/ - growpart\n - resizefs/' /etc/cloud/cloud.cfg
+fi
+
+# allow sudo powers to cloud-user
+echo -e 'cloud-user\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
+
+# Disable subscription-manager yum plugins
+sed -i 's|^enabled=1|enabled=0|' /etc/yum/pluginconf.d/product-id.conf
+sed -i 's|^enabled=1|enabled=0|' /etc/yum/pluginconf.d/subscription-manager.conf
+
+echo "Cleaning old yum repodata."
+dnf clean all
+
+# clean up installation logs"
+rm -rf /var/log/yum.log
+rm -rf /var/lib/yum/*
+rm -rf /root/install.log
+rm -rf /root/install.log.syslog
+rm -rf /root/anaconda-ks.cfg
+rm -rf /var/log/anaconda*
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/yum
+/usr/sbin/fixfiles -R -a restore
+
+# remove random-seed so it's not the same every time
+rm -f /var/lib/systemd/random-seed
+
+# Remove machine-id on the pre generated images
+cat /dev/null > /etc/machine-id
+
+# Anaconda is writing to /etc/resolv.conf from the generating environment.
+# The system should start out with an empty file.
+truncate -s 0 /etc/resolv.conf
+
+%end

fedora-i3-common.ks

@@ -0,0 +1,36 @@
+# fedora-livecd-i3.ks
+#
+# Description:
+# - Fedora Live Spin with the tiling window manager i3wm
+#
+# Maintainer(s):
+# - Nasir Hussain    <nasirhm@fedoraproject.org>
+# - Eduard Lucena    <x3mboy@fedoraproject.org>
+# - Justin W. Flory  <jwf@fedoraproject.org>
+# - Dan Cermak       <defolos@fedoraproject.org>
+
+
+%packages
+@^i3-desktop-environment
+brightlight
+feh
+dex-autostart
+thunar
+
+
+# unlock default keyring. FIXME: Should probably be done in comps
+gnome-keyring-pam
+# Admin tools are handy to have
+@admin-tools
+wget
+# Better more popular browser
+system-config-printer
+
+# save some space
+-autofs
+-acpid
+-gimp-help
+-desktop-backgrounds-basic
+-aspell-*                   # dictionaries are big
+
+%end

fedora-iot.ks

@@ -8,10 +8,10 @@ timezone --utc Etc/UTC
 selinux --enforcing
 rootpw --lock --iscrypted locked
 
-bootloader --timeout=1 --append="net.ifnames=0 modprobe.blacklist=vc4"
+bootloader --timeout=1 --append="modprobe.blacklist=vc4"
 
 network --bootproto=dhcp --device=link --activate --onboot=on
-services --enabled=NetworkManager,sshd,rngd,zram-swap
+services --enabled=NetworkManager,sshd,rngd
 
 zerombr
 clearpart --all --initlabel --disklabel=msdos
@@ -26,9 +26,12 @@ reboot
 %post --erroronfail
 # Find the architecture we are on
 arch=$(uname -m)
+if [[ $arch == "armv7l" ]]; then
+	arch="armhfp"
+fi
 
 # Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
+if [[ $arch == "aarch64" ]] || [[ $arch == "armhfp" ]]; then
 if [[ $arch == "aarch64" ]]; then
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
@@ -67,21 +70,13 @@ cp /etc/skel/.bash* /var/roothome
 
 # Remove any persistent NIC rules generated by udev
 rm -vf /etc/udev/rules.d/*persistent-net*.rules
-# And ensure that we will do DHCP on eth0 on startup
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
 
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/systemd/random-seed
 
 echo "Packages within this iot image:"
 echo "-----------------------------------------------------------------------"
-rpm -qa
+rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
 echo "-----------------------------------------------------------------------"
 # Note that running rpm recreates the rpm db files which aren't needed/wanted
 rm -f /var/lib/rpm/__db*
@@ -93,7 +88,7 @@ rm -f /var/tmp/zeros
 echo "(Don't worry -- that out-of-space error was expected.)"
 
 # For trac ticket https://pagure.io/atomic-wg/issue/128
-rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
+rm -f /etc/sysconfig/network-scripts/ifcfg-*
 
 # Anaconda is writing an /etc/resolv.conf from the install environment.
 # The system should start out with an empty file, otherwise cloud-init

fedora-kde-common.ks

@@ -1,17 +1,18 @@
 
 %packages
+# install env-group to resolve RhBug:1891500
+@^kde-desktop-environment
+
 @firefox
 @kde-apps
-@kde-desktop
 @kde-media
-@kde-office
-@networkmanager-submodules
+@libreoffice
+
 fedora-release-kde
 
-### The KDE-Desktop
+-@admin-tools
 
-### Browser
-falkon
+### The KDE-Desktop
 
 ### fixes
 
@@ -30,15 +31,15 @@ kde-l10n
 # don't include these for now to fit on a cd
 -desktop-backgrounds-basic
 -kdeaccessibility*
-#-ktorrent			# kget has also basic torrent features (~3 megs)
+-ktorrent			# kget has also basic torrent features (~3 megs)
 -digikam			# digikam has duplicate functionality with gwenview (~28 megs)
-#-amarok 			# ~23 megs (mysql-embedded etc.)
 -kipi-plugins			# ~8 megs + drags in Marble
+-krusader			# ~4 megs
+-k3b				# ~15 megs
+
 #-kdeplasma-addons		# ~16 megs
-#-krusader			# ~4 megs
 
 # Additional packages that are not default in kde-* groups, but useful
-k3b				# ~15 megs
 #kdeartwork			# only include some parts of kdeartwork
 fuse
 mediawriter

fedora-live-astronomy_kde.ks

@@ -34,9 +34,7 @@ astrometry
 astrometry-tycho2
 cdsclient
 fpack
-gcx
 psfex
-saoimage
 scamp
 sextractor
 siril
@@ -54,7 +52,7 @@ indistarter
 kstars
 
 # misc. astronomy
-celestia
+#celestia
 stellarium
 virtualplanet
 
@@ -96,10 +94,8 @@ python3-photutils
 python3-pyvo
 python3-reproject
 python3-sep
-python3-wcsaxes
 
 # matplotlib backends
-python3-matplotlib-qt4
 python3-matplotlib-qt5
 python3-matplotlib-tk
 
@@ -107,10 +103,11 @@ python3-matplotlib-tk
 # Python IDE very useful for scientific use
 python3-spyder
 
-#Version control- a GUI for each as well
+# BOINC for distributed computing
+boinc-client
+boinc-manager
 
-# Installing rapidsvn will also install subversion package
-rapidsvn 
+#Version control- a GUI for each as well
 git
 git-gui
 
@@ -123,14 +120,14 @@ kst-fits
 LabPlot
 
 #Misc. Utils
-# icedtea-web to have webstart useful for VO tools
-icedtea-web
 ImageMagick
 kate
 kate-plugins
 rlwrap
 screen
-plasma-applet-redshift-control
+
+# Java JRE for VO tools
+java
 
 # Omit KDE 4 translations for now: https://bugzilla.redhat.com/show_bug.cgi?id=1197940
 -kde-l10n-*

fedora-live-base.ks

@@ -24,17 +24,6 @@ shutdown
 %include fedora-repo.ks
 
 %packages
-@base-x
-@guest-desktop-agents
-@standard
-@core
-@fonts
-@input-methods
-@dial-up
-@multimedia
-@hardware-support
-@printing
-
 # Explicitly specified here:
 # <notting> walters: because otherwise dependency loops cause yum issues.
 kernel
@@ -52,6 +41,10 @@ anaconda
 anaconda-install-env-deps
 anaconda-live
 @anaconda-tools
+# Anaconda has a weak dep on this and we don't want it on livecds, see
+# https://fedoraproject.org/wiki/Changes/RemoveDeviceMapperMultipathFromWorkstationLiveCD
+-fcoe-utils
+-device-mapper-multipath
 
 # Need aajohan-comfortaa-fonts for the SVG rnotes images
 aajohan-comfortaa-fonts
@@ -194,9 +187,6 @@ systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
 systemctl stop mdmonitor.service 2> /dev/null || :
 systemctl stop mdmonitor-takeover.service 2> /dev/null || :
 
-# don't enable the gnome-settings-daemon packagekit plugin
-gsettings set org.gnome.software download-updates 'false' || :
-
 # don't start cron/at as they tend to spawn things which are
 # disk intensive that are painful on a live image
 systemctl --no-reload disable crond.service 2> /dev/null || :
@@ -298,11 +288,8 @@ EOF
 
 # work around for poor key import UI in PackageKit
 rm -f /var/lib/rpm/__db*
-releasever=$(rpm --eval '%{fedora}')
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
 echo "Packages within this LiveCD"
-rpm -qa
+rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*
 
@@ -337,23 +324,15 @@ touch /etc/machine-id
 
 
 %post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+# For livecd-creator builds only (lorax/livemedia-creator handles this directly)
+if [ -n "$LIVE_ROOT" ]; then
+    cp "$INSTALL_ROOT"/usr/share/licenses/*-release-common/* "$LIVE_ROOT/"
 
-# only works on x86, x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+    # only installed on x86, x86_64
+    if [ -f /usr/bin/livecd-iso-to-disk ]; then
+        mkdir -p "$LIVE_ROOT/LiveOS"
+        cp /usr/bin/livecd-iso-to-disk "$LIVE_ROOT/LiveOS"
+    fi
 fi
 
 %end

fedora-live-comp_neuro.ks

@@ -2,11 +2,11 @@
 # https://fedoraproject.org/wiki/Changes/Comp_Neuro_Lab
 #
 # Maintained by the NeuroFedora SIG:
-# https://fedoraproject.org/wiki/SIGs/NeuroFedora
+# https://neuro.fedoraproject.org
 # mailto:neuro-sig@lists.fedoraproject.org
 
 %include fedora-live-workstation.ks
 %include fedora-comp-neuro-common.ks
 %include fedora-neuro-gnome-common.ks
 
-part / --size 9656
+part / --size 10240

fedora-live-design_suite.ks

@@ -1,58 +1,17 @@
 # fedora-design-suite.ks
 # Based on Live Workstation
-# Description:
-# - A collection of applications targeted towards professional visual designers
-# Website: http://fedoraproject.org/wiki/Design_Suite
-# Maintainer:
-# - Luya Tshimbalanga <luya AT fedoraproject DOT org>
-# - Credit to Sebastian Dziallas for initiating the project
+# A collection of applications for professional visual designers
+# http://fedoraproject.org/wiki/Design_Suite
+# Maintained by Luya Tshimbalanga <luya AT fedoraproject DOT org>
+# Credit to Sebastian Dziallas for initiating the project
 
 %include fedora-live-workstation.ks
+%include fedora-design-suite-common.ks
 
 # Size partition
 part / --size 14336
 
-%packages
-# Switch to groups for design suite
-@design-suite
-
-# Provides backup application
-deja-dup
-deja-dup-nautilus
-
-# Add extra gnome applications
-gnome-books
-gnome-calendar
-gnome-photos
-gnome-shell-extension-pomodoro
-gnome-todo
-
-# Add cosmetic for gnome-terminal
-powerline
-powerline-fonts
-
-# Extra wallpapers
-f32-backgrounds-extras-gnome
-
-# removal of unneeded applications
--gnome-boxes
--eog
--rdesktop
-
-# temporarily removing conflicting application
--mypaint
--sparkleshare
--blender-luxcorerender
-
-%end
-
 %post
-#Override the favorite desktop application in Dash
-cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-[org.gnome.shell]
-favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'pitivi.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
-FOE
-
 # Add link to lists of tutorials
 cat >> /usr/share/applications/list-design-tutorials.desktop << FOE
 [Desktop Entry]
@@ -92,7 +51,21 @@ Categories=Documentation;
 FOE
 chmod a+x /usr/share/applications/fedora-design-team.desktop
 
+# Use Powerline in bash
+cat >>  $HOME/.bashrc << FOE
+# Enable powerline daemon
+if [ -f `which powerline-daemon` ]; then
+  powerline-daemon -q
+  POWERLINE_BASH_CONTINUATION=1
+  POWERLINE_BASH_SELECT=1
+  . /usr/share/powerline/bash/powerline.sh
+fi
+FOE
+
 # rebuild schema cache with any overrides we installed
 glib-compile-schemas /usr/share/glib-2.0/schemas
 
+#Override the favorite desktop application in Dash
+sed -i "s/favorite-apps=."'*'"/favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'pitivi.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']/" /etc/rc.d/init.d/livesys
+
 %end

fedora-live-games.ks

@@ -91,7 +91,7 @@ glaxium
 gnubg
 gnugo
 haxima
-hedgewars
+#hedgewars -- broken
 kcheckers
 knights
 lbrickbuster2
@@ -140,7 +140,7 @@ wordwarvi
 xgalaxy
 # zasx # Would pull in fluid-soundfont-lite-patches
 
-# falling blocks games (small) 
+# falling blocks games (small)
 
 amoebax
 crack-attack
@@ -150,7 +150,7 @@ gweled
 
 # puzzles (big)
 enigma
-fillets-ng
+# fillets-ng # broken in f34
 pingus
 
 # puzzles (small)
@@ -165,13 +165,11 @@ vodovod
 
 # card games
 
-#poker2d - dropped from F14 for being orphaned
 PySolFC
 
 # educational/simulation
 
-bygfoot
-celestia
+#celestia - not currently building
 planets
 tuxpaint
 tuxpaint-stamps

fedora-live-i3.ks

@@ -0,0 +1,59 @@
+# fedora-livecd-i3.ks
+#
+# Description:
+# - Fedora Live Spin with the tiling window manager i3
+#
+# Maintainer(s):
+# - Nasir Hussain    <nasirhm@fedoraproject.org>
+# - Eduard Lucena    <x3mboy@fedoraproject.org>
+# - Dan Cermak       <defolos@tummy.com>
+# - Justin W. Flory  <jwf@fedoraproject.org>
+
+%include fedora-live-base.ks
+%include fedora-live-minimization.ks
+%include fedora-i3-common.ks
+
+%post
+# xfce configuration
+
+# create /etc/sysconfig/desktop (needed for installation)
+
+cat > /etc/sysconfig/desktop <<EOF
+PREFERRED=/usr/bin/i3
+DISPLAYMANAGER=/usr/sbin/lightdm
+EOF
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# deactivate xfconf-migration (#683161)
+rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set i3 as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=i3/' /etc/lightdm/lightdm.conf
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+
+# this goes at the end after all other changes.
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+# setting the wallpaper
+echo "/usr/bin/feh --bg-scale /usr/share/backgrounds/default.png" >> /home/liveuser/.profile
+
+# echoing type liveinst to start the installer
+echo "echo 'Please type liveinst and press Enter to start the installer'" >> /home/liveuser/.bashrc
+
+# fixing the installer non opening bug
+echo "xhost si:localuser:root" >> /home/liveuser/.profile
+
+EOF
+
+%end
+

fedora-live-jam_kde.ks

@@ -37,6 +37,7 @@ nano
 
 # fedora jam theming (to be customized)
 fedora-jam-backgrounds
+fedora-jam-kde-theme
 
 #Misc. Utils
 screen
@@ -65,7 +66,7 @@ thunderbird
 #setup kickoff favorites
 /bin/mkdir -p /etc/skel/.config
 
-JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/ardour5.desktop,/usr/share/applications/carla.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.kontact.desktop
+JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/mozilla-thunderbird.desktop,/usr/share/applications/studio-controls.desktop,/usr/share/applications/ardour6.desktop,/usr/share/applications/carla.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop
 JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,$JAMFAVORITES
 
 cat <<EOF  >> /etc/skel/.config/kickoffrc
@@ -82,3 +83,5 @@ cat >> /etc/rc.d/init.d/livesys << EOF
 EOF
 
 %end
+
+

fedora-live-kde-base.ks

@@ -22,15 +22,22 @@ EOF
 # add initscript
 cat >> /etc/rc.d/init.d/livesys << EOF
 
+# are we *not* able to use wayland sessions?
+if strstr "\`cat /proc/cmdline\`" nomodeset ; then
+PLASMA_SESSION_FILE="plasmax11.desktop"
+else
+PLASMA_SESSION_FILE="plasma.desktop"
+fi
+
 # set up autologin for user liveuser
 if [ -f /etc/sddm.conf ]; then
 sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
-sed -i 's/^#Session=.*/Session=plasma.desktop/' /etc/sddm.conf
+sed -i "s/^#Session=.*/Session=\${PLASMA_SESSION_FILE}/" /etc/sddm.conf
 else
 cat > /etc/sddm.conf << SDDM_EOF
 [Autologin]
 User=liveuser
-Session=plasma.desktop
+Session=\${PLASMA_SESSION_FILE}
 SDDM_EOF
 fi
 
@@ -55,9 +62,10 @@ cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
 Driver=QSQLITE3
 AKONADI_EOF
 
-# Disable plasma-pk-updates (bz #1436873 and 1206760)
-echo "Removing plasma-pk-updates package."
-rpm -e plasma-pk-updates
+# "Disable plasma-discover-notifier"
+mkdir -p /home/liveuser/.config/autostart
+cp -a /etc/xdg/autostart/org.kde.discover.notifier.desktop /home/liveuser/.config/autostart/
+echo 'Hidden=true' >> /home/liveuser/.config/autostart/org.kde.discover.notifier.desktop
 
 # Disable baloo
 cat > /home/liveuser/.config/baloofilerc << BALOO_EOF

fedora-live-kde.ks

@@ -12,7 +12,7 @@
 %include fedora-kde-minimization.ks
 
 # DVD payload
-part / --size=7000
+part / --size=7200
 
 %post
 %end

fedora-live-mate_compiz.ks

@@ -7,7 +7,7 @@
 %include fedora-mate-common.ks
 %include fedora-live-minimization.ks
 
-part / --size 7168
+part / --size 8192
 
 %post
 cat >> /etc/rc.d/init.d/livesys << EOF

fedora-live-python-classroom.ks

@@ -8,4 +8,4 @@
 %include fedora-python-classroom-gnome-common.ks
 
 # https://bugzilla.redhat.com/show_bug.cgi?id=1695796
-part / --size 7168
+part / --size 8192

fedora-live-robotics.ks

@@ -10,7 +10,8 @@ part / --size 10752
 
 %packages
 # Start with GNOME
-@gnome-desktop
+# Install workstation-product-environment to resolve RhBug:1891500
+@^workstation-product-environment
 
 # Add robotics development packages
 @robotics-suite
@@ -30,9 +31,10 @@ mercurial
 -@dial-up
 -@input-methods
 -@standard
-
-# Add a web browser
-@firefox
+-@container-management
+-@libreoffice
+-@networkmanager-submodules
+-@workstation-product
 
 # Remove office suite
 -libreoffice-*
@@ -57,7 +59,6 @@ mercurial
 
 # Help and art can be big, too
 -gnome-user-docs
--gnome-getting-started-docs
 -evolution-help
 -desktop-backgrounds-basic
 -*backgrounds-extras

fedora-live-scientific_kde.ks

@@ -13,7 +13,7 @@
 %include fedora-scientific-common.ks
 
 # The recommended part size for DVDs is too close to use for the scientific spin
-part / --size 14500
+part / --size 15000
 
 %post
 

fedora-live-security.ks

@@ -21,7 +21,9 @@
 part / --size 10240
 
 %packages
-@xfce-desktop
+# install env-group to resolve RhBug:1891500
+@^xfce-desktop-environment
+
 @xfce-apps
 
 # Security tools

fedora-live-soas.ks

@@ -4,7 +4,8 @@
 # - A Sugar environment that you can carry in your pocket
 #
 # Maintainers:
-# - Peter Robinson <pbrobinson AT gmail DOT com>
+# - Chihurumnaya Ibiam <ibiamchihurumnaya AT gmail DOT com>
+# - Alex Perez <aperez AT alexperez DOT com>
 
 %include fedora-live-base.ks
 %include fedora-live-minimization.ks

fedora-live-workstation.ks

@@ -56,7 +56,7 @@ if [ -f /usr/share/applications/liveinst.desktop ]; then
 
   cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
 [org.gnome.shell]
-favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+favorite-apps=['firefox.desktop', 'org.gnome.Calendar.desktop', 'rhythmbox.desktop', 'org.gnome.Photos.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
 FOE
 
   # Make the welcome screen show up
@@ -66,6 +66,11 @@ FOE
     cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
   fi
 
+  # Disable GNOME welcome tour so it doesn't overlap with Fedora welcome screen
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+welcome-dialog-last-shown-version='4294967295'
+FOE
+
   # Copy Anaconda branding in place
   if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
     cp -a /usr/share/lorax/product/* /

fedora-live-xfce.ks

@@ -13,6 +13,9 @@
 %include fedora-live-minimization.ks
 %include fedora-xfce-common.ks
 
+# need a bigger /
+part / --size 6144
+
 %post
 # xfce configuration
 

fedora-lxde-common.ks

@@ -8,11 +8,12 @@
 
 %packages
 ### LXDE desktop
-@lxde-desktop
+# install env-group to resolve RhBug:1891500
+@^lxde-desktop-environment
+
 @lxde-apps
 @lxde-media
 @lxde-office
-@networkmanager-submodules
 
 # FIXME: can be omitted once comps is updated
 midori
@@ -39,6 +40,7 @@ metacity
 #-words
 
 # save some space
+-@admin-tools
 -autofs
 -acpid
 -gimp-help

fedora-lxqt-common.ks

@@ -9,10 +9,11 @@
 #
 
 %packages
-@lxqt
+# install env-group to resolve RhBug:1891500
+@^lxqt-desktop-environment
+
 @lxqt-apps
 @lxqt-media
-@networkmanager-submodules
 
 # for nm applet
 gnome-keyring
@@ -38,11 +39,12 @@ wqy-microhei-fonts          # a compact CJK font, to replace:
 -adobe-source-han-sans-cn-fonts     # simplified Chinese
 -adobe-source-han-sans-tw-fonts     # traditional Chinese
 
--paratype-pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
+-pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
 #-stix-fonts        # mathematical symbols
 
 # remove input methods to free space
 -@input-methods
+-@admin-tools
 -scim*
 -m17n*
 # Temporary include ibus to workaround RHBZ 1633225

fedora-mate-common.ks

@@ -1,5 +1,8 @@
 %packages
-@mate
+# install env-group to resolve RhBug:1891500
+@^mate-desktop-environment
+
+fedora-release-matecompiz
 compiz
 compiz-plugins-main
 compiz-plugins-extra
@@ -13,15 +16,16 @@ simple-ccsm
 emerald-themes
 emerald
 fusion-icon
-@networkmanager-submodules
-
-# some apps from mate-applications
-caja-actions
-mate-disk-usage-analyzer
 
 # blacklist applications which breaks mate-desktop
 -audacious
 
+# see https://bugzilla.redhat.com/show_bug.cgi?id=2068699
+# and https://bugzilla.redhat.com/show_bug.cgi?id=1933494
+# use earlyoom instead of systemd-oomd-defaults
+earlyoom
+-systemd-oomd-defaults
+
 # office
 @libreoffice
 
@@ -34,15 +38,16 @@ nss-mdns
 
 # Drop things for size
 -@3d-printing
+-@admin-tools
 -brasero
 -fedora-icon-theme
 -gnome-icon-theme
 -gnome-icon-theme-symbolic
+-gnome-logs
 -gnome-software
 -gnome-user-docs
 
 -@mate-applications
--mate-icon-theme-faenza
 
 # Help and art can be big, too
 -gnome-user-docs

fedora-minimal-common.ks

@@ -1,8 +1,10 @@
 %packages
+microdnf
 -@standard
 -initial-setup-gui
 -generic-release*
 -glibc-all-langpacks
+-xkeyboard-config
 # recommended by iproute, we don't want it in minimal
 -iproute-tc
 # recommended by gnutls, we don't want it in minimal

fedora-modular-disk-minimal.ks

@@ -6,7 +6,8 @@ selinux --enforcing
 # Disabled for modular compose (for now)
 #firewall --enabled --service=mdns
 # Disabled for modular compose (for now)
-#services --enabled=sshd,NetworkManager,chronyd,initial-setup
+#services --enabled=sshd,chronyd,initial-setup
+services --enabled=NetworkManager
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -35,7 +36,7 @@ glibc-minimal-langpack
 grubby
 kernel
 sssd-client
-dhcp-client
+@networkmanager-submodules
 -fedora-logos
 -coreutils
 -dosfstools
@@ -53,14 +54,25 @@ dhcp-client
 
 %post
 
+# Find the architecture we are on
+arch=$(uname -m)
+
 # Setup Raspberry Pi firmware
+if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
+if [[ $arch == "aarch64" ]]; then
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
+else
+cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
+cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
+cp -P /usr/share/uboot/rpi_4_32b/u-boot.bin /boot/efi/rpi4-u-boot.bin
+fi
+fi
 
 releasever=$(rpm --eval '%{fedora}')
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 echo "Packages within this disk image"
-rpm -qa
+rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*
 

fedora-neuro-gnome-common.ks

@@ -1,7 +1,7 @@
 # Description: Common gnome based configuration for NeuroFedora spin images.
 #
 # Maintained by the NeuroFedora SIG:
-# https://fedoraproject.org/wiki/SIGs/NeuroFedora
+# https://neuro.fedoraproject.org
 # mailto:neuro-sig@lists.fedoraproject.org
 
 # Please specify the individual package sets in their own ks files:

fedora-python-classroom-common.ks

@@ -21,6 +21,23 @@ wget
 -python35
 -python36
 -python37
+-python38
+-python2.7
+-python3.5
+-python3.6
+-python3.7
+-python3.8
 -pypy
 
+# Remove LaTeX, see https://bugzilla.redhat.com/show_bug.cgi?id=1862450
+#               and https://bugzilla.redhat.com/show_bug.cgi?id=1902354
+-texlive-base
+-texlive-latex
+
+# Remove gdal recommended by networkx, brings in close to 600M of proj data
+# Also explicitly list proj to make sure both packages are gone
+# https://lists.fedoraproject.org/archives/list/python-devel@lists.fedoraproject.org/thread/LGC5IMMHZ4DM7GQNPAFC6GU362PPTN7O/
+-python3-gdal
+-proj
+
 %end

fedora-python-classroom-gnome-common.ks

@@ -58,7 +58,6 @@ python3-pillow-tk
 
 # Help and art can be big, too
 -gnome-user-docs
--gnome-getting-started-docs
 -desktop-backgrounds-basic
 -*backgrounds-extras
 
@@ -91,6 +90,9 @@ python3-pillow-tk
 -system-config-services
 -policycoreutils-gui
 
+# Inkscape is too big to be included
+-inkscape
+
 %end
 
 

fedora-scientific-common.ks

@@ -4,9 +4,9 @@
 @engineering-and-scientific
 
 # scilab
-scilab
-scilab-devel
-scilab-doc
+## scilab
+## scilab-devel
+## scilab-doc
 
 # Remove sagemath explicitly?
 -sagemath
@@ -46,10 +46,6 @@ python3-pandas
 python3-matplotlib-qt4
 python3-matplotlib-tk
 
-# Include Java development tools
-@java-development
-apache-commons-math
-
 #fortran compiler
 gcc-gfortran
 
@@ -61,22 +57,13 @@ julia
 julia-doc
 julia-devel
 
-# IDEs for the IDE folks
-@eclipse
-
-# Workaround for https://pagure.io/releng/issue/7814
--eclipse-linuxtools-vagrant
-
 python3-spyder
 python3-spyder-kernels
 
-
 #writing & publishing
 emacs
 emacs-color-theme
 vim
-scribus
-#scite
 lyx
 kile
 
@@ -124,12 +111,10 @@ root-gui-fitpanel
 # python-pbs
 
 #Drawing, Picture viewing tools, Visualization tools
-dia
 inkscape
 xzgv
-gimp
-ggobi
-ggobi-devel
+## ggobi
+## ggobi-devel
 #g3data
 #Mayavi
 
@@ -138,7 +123,6 @@ screen
 tmux
 rlwrap
 hexchat
-shutter
 fig2ps
 bibtex2html
 hevea

fedora-soas-common.ks

@@ -4,14 +4,17 @@
 # - A Sugar environment that you can carry in your pocket
 #
 # Maintainers:
-# - Peter Robinson <pbrobinson AT gmail DOT com>
+# - Chihurumnaya Ibiam <ibiamchihurumnaya AT gmail DOT com>
+# - Alex Perez <aperez AT alexperez DOT com>
 
 firewall --enabled --service=mdns,presence
 
 %packages
+# install env-group to resolve RhBug:1891500
+@^sugar-desktop-environment
 
 # == Core Sugar Platform ==
-@sugar-desktop
+fedora-release-soas
 
 # explicitly remove a bunch of extra stuff
 -openbox
@@ -38,6 +41,9 @@ firewall --enabled --service=mdns,presence
 -hyperv-daemons
 -sane-backends
 -sane-backends-drivers-scanners
+-dhcp-client
+-gcc-gdb-plugin
+-gcc
 
 # Add some extra fonts
 dejavu-sans-fonts
@@ -47,12 +53,6 @@ aajohan-comfortaa-fonts
 sil-abyssinica-fonts
 vlgothic-fonts
 
-# Write breaks unless we do this (we don't need it anyway)
-@input-methods
-
-# Needed for wifi, bluetooth and WWAN connection support
-@networkmanager-submodules
-
 # Usefulness for DSL connections as per:
 # http://bugs.sugarlabs.org/ticket/1951
 rp-pppoe
@@ -105,6 +105,7 @@ show-logout=false
 [org.sugarlabs.power]
 automatic=true
 EOF
+
 /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas
 
 %end

fedora-workstation-common.ks

@@ -5,21 +5,8 @@
 -@input-methods
 -@standard
 
-# Make sure to sync any additions / removals done here with
-# workstation-product-environment in comps
-@base-x
-@container-management
-@core
-@firefox
-@fonts
-@gnome-desktop
-@guest-desktop-agents
-@hardware-support
-@libreoffice
-@multimedia
-@networkmanager-submodules
-@printing
-@workstation-product
+# Install workstation-product-environment to resolve RhBug:1891500
+@^workstation-product-environment
 
 # Exclude unwanted packages from @anaconda-tools group
 -gfs2-utils

fedora-xfce-common.ks

@@ -4,31 +4,22 @@
 # - Fedora Live Spin with the light-weight XFCE Desktop Environment
 #
 # Maintainer(s):
-# - Rahul Sundaram    <sundaram@fedoraproject.org>
-# - Christoph Wickert <cwickert@fedoraproject.org>
 # - Kevin Fenzi       <kevin@tummy.com>
 # - Adam Miller       <maxamillion@fedoraproject.org>
-
+# - Mukundan Ragavan  <nonamedotc@fedoraproject.org>
 
 %packages
 
-@networkmanager-submodules
-@xfce-desktop
+fedora-release-xfce
+# install env-group to resolve RhBug:1891500
+@^xfce-desktop-environment
+
 @xfce-apps
 @xfce-extra-plugins
 @xfce-media
 @xfce-office
 
-# unlock default keyring. FIXME: Should probably be done in comps
-gnome-keyring-pam
-# Admin tools are handy to have
-@admin-tools
-# Add some screensavers, people seem to like them
-# Note that blank is still default.
-xscreensaver-extras
 wget
-# Better more popular browser
-#firefox
 system-config-printer
 
 # save some space
@@ -38,5 +29,6 @@ system-config-printer
 -desktop-backgrounds-basic
 -aspell-*                   # dictionaries are big
 -xfce4-sensors-plugin
+-xfce4-eyes-plugin
 
 %end

maintainers.toml

@@ -21,19 +21,18 @@ fas = [ "grinnz" ]
 maintainers = [ "Dan Book" ]
 
 [spins.lxde.x86_64]
-fas = [ "cwickert" ]
-maintainers = [ "Christoph Wickert" ]
+fas = [ "cwickert", "mtasaka" ]
+maintainers = [ "Christoph Wickert", "Mamoru TASAKA" ]
 [spins.lxde.armhfp]
-fas = [ "cwickert" ]
-maintainers = [ "Christoph Wickert" ]
+fas = [ "cwickert", "mtasaka" ]
+maintainers = [ "Christoph Wickert", "Mamoru TASAKA" ]
 
 [spins.soas.x86_64]
-fas = [ "chimosky", "pbrobinson" ]
-maintainers = [ "Chihurumnaya Ibiam", "Peter Robinson" ]
+fas = [ "chimosky", "aperezbios", "pbrobinson" ]
+maintainers = [ "Chihurumnaya Ibiam", "Alex Perez", "Peter Robinson" ]
 [spins.soas.armhfp]
-fas = [ "chimosky", "pbrobinson" ]
-maintainers = [ "Chihurumnaya Ibiam", "Peter Robinson" ]
-
+fas = [ "chimosky", "aperezbios", "pbrobinson" ]
+maintainers = [ "Chihurumnaya Ibiam", "Alex Perez", "Peter Robinson" ]
 
 [labs.astronomy_kde.x86_64]
 fas = [ "lupinix" ]
@@ -59,6 +58,10 @@ maintainers = [ "Darryl T. Agostinelli" ]
 fas = [ "eeickmeyer" ]
 maintainers = [ "Erich Eickmeyer" ]
 
+[labs.python_classroom.x86_64]
+fas = [ "churchyard", "python-sig" ]
+maintainers = [ "Miro Hrončok", "Python SIG" ]
+
 [labs.scientific_kde.x86_64]
 fas = [ "scitech" ]
 maintainers = [ "SciTech SIG" ]
@@ -66,3 +69,11 @@ maintainers = [ "SciTech SIG" ]
 [labs.scientific.x86_64]
 fas = [ "scitech" ]
 maintainers = [ "SciTech SIG" ]
+
+[labs.robotics.x86_64]
+fas = [ "rmattes", "robotics-sig" ]
+maintainers = [ "Rich Mattes", "Robotics SIG" ]
+
+[spins.i3.x86_64]
+fas = [ "jflory7", "defolos", "nasirhm", "odilhao", "x3mboy" ]
+maintainers = [ "Justin Flory", "Dan Čermák", "Nasir Hussain", "Odilon Junior", "Eduard Lucena" ]

tools/nightly-composes

@@ -1,159 +0,0 @@
-#!/bin/bash
-
-TOPDIR=/var/tmp
-
-STATEFILE=$TOPDIR/nightlylivecdstatefile
-# WARNING: MirrorManager must always give this mirror to the host running this script
-STATEPATH=http://infrastructure.fedoraproject.org/pub/fedora/linux/development/13/x86_64/os/repodata/repomd.xml
-
-getdatehash() {
-     DUMP=$(wget --no-cache -S $1 -O /dev/null 2>&1)
-     echo "$DUMP" | grep -q "HTTP/1.1 200 OK"
-     if [ $? -eq 0 ]; then
-         DATE=$(echo "$DUMP"|grep '^  Last-Modified'|sha1sum |awk {'print $1'})
-     else
-         echo "ERROR: $STATEPATH failed."
-         exit 1
-     fi
-}
-getdatehash $STATEPATH
-
-if [ -f $STATEFILE ]; then
-     OLDDATE=$(cat $STATEFILE)
-     if [ "$OLDDATE" == "$DATE" ]; then
-         # No change, exit
-         exit 0
-     fi
-fi
-
-# Save date hash
-echo "$DATE" > $STATEFILE
-echo "Saving date hash: $DATE"
-
-# Check for running livecd-creator and abort if it is running
-if ps -ef |grep -v grep |grep -q livecd-creator; then
-     echo "ERROR: Another livecd-creator is still running.  Aborting."
-     exit 255
-fi
-
-if [ ! -d $TOPDIR/spin-kickstarts/ ]; then
-     cd $TOPDIR
-     git clone http://git.fedorahosted.org/git/spin-kickstarts.git
-fi
-
-# pull any git updates to kickstarts
-
-cd $TOPDIR/spin-kickstarts/
-git reset --hard
-git pull
-
-if [ ! -d $TOPDIR/nightly-composes ]; then
-	mkdir -p $TOPDIR/nightly-composes
-fi
-
-DATE=`date +%Y%m%d.%H`
-
-# remove the previous days compose
-find $TOPDIR/nightly-composes/ -name '*.iso' -exec rm -f '{}' \;
-
-# loop though the valid spins
-for i in `echo desktop design-suite xfce broffice.org kde electronic-lab games lxde soas security`
-do
-
-   cd $TOPDIR/nightly-composes/
-
-   echo $i
-
-   if [ ! -d $TOPDIR/nightly-composes/$i ]; then
-  	mkdir -p $TOPDIR/nightly-composes/$i
-   fi
-   if [ ! -d $TOPDIR/nightly-composes/$i/logs ]; then
-  	mkdir -p $TOPDIR/nightly-composes/$i/logs
-	touch $TOPDIR/nightly-composes/$i/logs/SIZEHISTORY-i386
-	touch $TOPDIR/nightly-composes/$i/logs/SIZEHISTORY-x86_64
-   fi
-
-   cd $i
-
-   # compose f13 not rawhide for now.
-   sed -i 's/rawhide/fedora-13/g' $TOPDIR/spin-kickstarts/*.ks
-
-   # debrand
-   # Note this is not needed for 'official' test spins
-   #sed -i 's/^-fedora-logos/fedora-logos/' $TOPDIR/spin-kickstarts/fedora-livecd-$i.ks
-   #sed -i 's/^generic-logos//' $TOPDIR/spin-kickstarts/fedora-livecd-$i.ks
-
-   echo "INFO: $i i386 live image compose starting"
-   setarch i386 livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f $i-i386-$DATE > logs/$DATE-i386.log 2>&1
-   if [ $? -ne 0 ]; then
-        echo "ERROR: $i i386 live image failed to compose on $DATE"
-	mv logs/$DATE-i386.log logs/$DATE-FAILED-i386.log
-   else
-        du $TOPDIR/nightly-composes/$i/$i-i386-$DATE.iso >> logs/SIZEHISTORY-i386
-        tail -2 logs/SIZEHISTORY-i386
-	rm -f CHECKSUM-i386
-	sha256sum $i-i386-$DATE.iso > CHECKSUM-i386
-        cat CHECKSUM-i386
-        echo "INFO: $i i386 live image compose finished OK"
-   fi
-
-   echo "INFO: $i x86_64 live image compose starting"
-   # Need to shorten the electronic-lab label to the 32 char limit
-   if [ "$i" = "electronic-lab" ]; then
-	livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f e-lab-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
-   else
-   	livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f $i-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
-   fi
-   if [ $? -ne 0 ]; then
-        echo "ERROR: $i x86_64 live image failed to compose on $DATE"
-	mv logs/$DATE-x86_64.log logs/$DATE-FAILED-x86_64.log
-   else
-        if [ "$i" = "electronic-lab" ]; then
-             du $TOPDIR/nightly-composes/$i/e-lab-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
-             tail -2 logs/SIZEHISTORY-x86_64
-	     rm -f CHECKSUM-x86_64
-	     sha256sum e-lab-x86_64-$DATE.iso > CHECKSUM-x86_64
-             cat CHECKSUM-x86_64
-        else
-             du $TOPDIR/nightly-composes/$i/$i-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
-             tail -2 logs/SIZEHISTORY-x86_64
-	     rm -f CHECKSUM-x86_64
-	     sha256sum $i-x86_64-$DATE.iso > CHECKSUM-x86_64
-             cat CHECKSUM-x86_64
-        fi
-        echo "INFO: $i x86_64 live image compose finished OK"
-   fi
-
-   # remove old resize image
-   #rm -f /tmp/resize-image-*
-done
-
-# do aos spin
-echo "INFO: aos i386 live image compose starting"
-cd $TOPDIR/nightly-composes/aos/
-setarch i386 livecd-creator -c $TOPDIR/spin-kickstarts/fedora-aos.ks -f aos-i386-$DATE > logs/$DATE-i386.log 2>&1
-if [ $? -ne 0 ]; then
-        echo "ERROR: aos i386 live image failed to compose on $DATE"
-	mv logs/$DATE-i386.log logs/$DATE-FAILED-i386.log
-else
-        du $TOPDIR/nightly-composes/aos/aos-i386-$DATE.iso >> logs/SIZEHISTORY-i386
-        tail -2 logs/SIZEHISTORY-i386
-	rm -f CHECKSUM-i386
-	sha256sum aos-i386-$DATE.iso > CHECKSUM-i386
-	cat CHECKSUM-i386
-        echo "INFO: aos i386 live image compose finished OK"
-fi
-
-echo "INFO: aos x86_64 live image compose starting"
-livecd-creator -c $TOPDIR/spin-kickstarts/fedora-aos.ks -f aos-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
-if [ $? -ne 0 ]; then
-        echo "ERROR: aos x86_64 live image failed to compose on $DATE"
-	mv logs/$DATE-x86_64.log logs/$DATE-FAILED-x86_64.log
-else
-        du $TOPDIR/nightly-composes/aos/aos-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
-        tail -2 logs/SIZEHISTORY-x86_64 
-	rm -f CHECKSUM-x86_64
-	sha256sum aos-x86_64-$DATE.iso > CHECKSUM-x86_64
-        cat CHECKSUM-x86_64
-        echo "INFO: aos x86_64 live image compose finished OK"
-fi