Remove supertuxcart to get under size again

there is breaking openstack

.sparkleshare

@@ -1 +0,0 @@
-d6afc629dc9311ebd79b4cedb2775531065ecb05

atomic-installer/lorax-configure-repo.tmpl

@@ -1,8 +0,0 @@
-## Lorax template to configure Anaconda to use the local OSTree
-## repository on disk.
-
-<%page args="ostree_osname, ostree_ref"/>
-append usr/share/anaconda/interactive-defaults.ks "ostreesetup --nogpg --osname=${ostree_osname} --remote=${ostree_osname} --url=file:////run/install/repo/content/repo --ref=${ostree_ref}\n"
-append usr/share/anaconda/interactive-defaults.ks "services --disabled cloud-init,cloud-config,cloud-final,cloud-init-local\n"
-append usr/share/anaconda/interactive-defaults.ks "%post --erroronfail\nrm -f /etc/ostree/remotes.d/${ostree_osname}.conf\nostree remote add --set=gpg-verify=false fedora-atomic 'http://dl.fedoraproject.org/pub/fedora/linux/atomic/22/'\n%end\n"
-

atomic-installer/lorax-embed-repo.tmpl

@@ -1,11 +0,0 @@
-## Lorax template to embed an OSTree repository into the installer.iso
-## and configure an interactive installer use to look for it.
-##
-## Note that we pull with depth=0 to only get *one* commit into the
-## ISO, because we obviously don't want the full history.
-
-<%page args="workdir, ostree_osname, ostree_repo, ostree_ref"/>
-runcmd mkdir -p ${workdir}/iso-graft/content/repo
-runcmd ostree --repo=${workdir}/iso-graft/content/repo init --mode=archive-z2
-runcmd ostree --repo=${workdir}/iso-graft/content/repo remote add ostree-mirror --set=gpg-verify=false ${ostree_repo}
-runcmd ostree --repo=${workdir}/iso-graft/content/repo pull --mirror ostree-mirror ${ostree_ref}

custom/fedora-livedvd-haskell.ks

@@ -1,4 +1,4 @@
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 part / --size 6000
 

custom/qa-test-day.ks

@@ -3,7 +3,7 @@
 # Contact QA team if you have any improvements for this kickstart:
 # https://fedoraproject.org/wiki/QA
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 
 ## System configuration

fedora-aos.ks

@@ -4,7 +4,7 @@
 lang C
 keyboard us
 timezone US/Eastern
-auth --useshadow --passalgo=sha512
+auth --useshadow --enablemd5
 selinux --permissive
 firewall --disabled
 bootloader --timeout=1 --append="acpi=force"

fedora-arm-base.ks

@@ -1,13 +1,13 @@
 lang en_US.UTF-8
 #keyboard us
-auth --useshadow --passalgo=sha512
+auth --useshadow --enablemd5
 selinux --enforcing
 firewall --enabled --service=mdns,ssh
 
 # configure extlinux bootloader
 bootloader extlinux
 
-part /boot --size=300 --fstype ext3
+part /boot --size=512 --fstype ext3
 part swap --size=512 --fstype swap
 part / --size=3000 --fstype ext4
 
@@ -51,7 +51,7 @@ rm -f /var/lib/rpm/__db*
 releasever=$(rpm -q --qf '%{version}\n' fedora-release)
 basearch=armhfp
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
-echo "Packages within this ARM disk image"
+echo "Packages within this LiveCD"
 rpm -qa
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*

fedora-arm-kde.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-kde-packages.ks
 
-part / --size=5000 --fstype ext4
+part / --size=4000 --fstype ext4
 
 %post
 echo -n "Enabling initial-setup gui mode on startup"

fedora-arm-minimal.ks

@@ -1,13 +1,12 @@
 %include fedora-arm-base.ks
 
-part swap --size=256 --fstype swap
-part / --size=1200 --fstype ext4
+part swap --size=128 --fstype swap
+part / --size=1400 --fstype ext4
 
 %packages
 -@standard
 -@dial-up
 -initial-setup-gui
--generic-release*
 %end
 
 %post

fedora-arm-server.ks

@@ -1,31 +0,0 @@
-%include fedora-arm-base.ks
-
-# server defaults to xfs for / so lets do so on arm also
-part / --size=3000 --fstype xfs
-
-%packages
--@dial-up
-# install the default groups for the server evironment since installing the environment is not working
-@server-product
-@standard
-@headless-management
-@container-management
-@domain-client
--initial-setup-gui
--generic-release*
-%end
-
-%post
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-echo -n "Enabling initial-setup text mode on startup"
-ln -s /usr/lib/systemd/system/initial-setup-text.service /etc/systemd/system/multi-user.target.wants/initial-setup-text.service
-echo .
-
-%end
-

fedora-arm-xfce.ks

@@ -2,8 +2,6 @@
 %include fedora-arm-xbase.ks
 %include fedora-xfce-packages.ks
 
-part / --size=4000 --fstype ext4
-
 %post
 echo -n "Enabling initial-setup gui mode on startup"
 ln -s /usr/lib/systemd/system/initial-setup-graphical.service /etc/systemd/system/graphical.target.wants/initial-setup-graphical.service

fedora-cinnamon-packages.ks

@@ -1,28 +0,0 @@
-# fedora-cinnamon-packages.ks
-#
-# Description:
-# - Fedora package set for the Cinnamon Desktop Environment
-#
-# Maintainer(s):
-# - Dan Book <grinnz@grinnz.com>
-
-%packages
-
-@networkmanager-submodules
-@cinnamon-desktop
-@libreoffice
-
-# internet and multimedia
-pidgin
-hexchat
-transmission
-parole
-
-# unlock default keyring. FIXME: Should probably be done in comps
-gnome-keyring-pam
-
-# save some space
--fedora-icon-theme
--PackageKit*                # we switched to yumex, so we don't need this
-
-%end

fedora-cloud-atomic-pxetolive.ks

@@ -1,31 +0,0 @@
-# PXE-to-Live Atomic: PXE boot directly into a running Atomic Host
-# https://fedoraproject.org/wiki/Changes/AtomicHost
-
-lang en_US.UTF-8
-keyboard us
-timezone America/New_York
-zerombr
-clearpart --all --initlabel
-rootpw --lock --iscrypted locked
-user --name=none
-bootloader --timeout=1
-network --bootproto=dhcp --device=link --activate
-# We are only able to install atomic with separate /boot partition currently
-part / --fstype="ext4" --size=6000
-part /boot --size=500 --fstype="ext4"
-shutdown
-services --disabled=docker-storage-setup,network
-services --enabled=NetworkManager,sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
- 
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/22/ --ref=fedora-atomic/f22/x86_64/docker-host
- 
-%post
-
-# Ensure the root password is locked, we use cloud-init
-passwd -l root
-userdel -r none
-
-# We copy content of separate /boot partition to root part when building live squashfs image,
-# and we don't want systemd to try to mount it when pxe booting
-cat /dev/null > /etc/fstab
-%end

fedora-cloud-atomic-vagrant.ks

@@ -1,29 +0,0 @@
-# Like the Atomic cloud image, but tuned for vagrant.  Enable
-# the vagrant user, disable cloud-init.
-
-%include fedora-cloud-atomic.ks
-
-services --disabled=cloud-init,cloud-init-local,cloud-config,cloud-final
-
-user --name=vagrant --password=vagrant
-rootpw vagrant
-
-%post --erroronfail
-
-# Work around cloud-init being both disabled and enabled; need
-# to refactor to a common base.
-systemctl mask cloud-init cloud-init-local cloud-config cloud-final
-
-# Vagrant setup
-sed -i 's,Defaults\\s*requiretty,Defaults !requiretty,' /etc/sudoers
-echo 'vagrant ALL=NOPASSWD: ALL' > /etc/sudoers.d/vagrant-nopasswd
-sed -i 's/.*UseDNS.*/UseDNS no/' /etc/ssh/sshd_config
-mkdir -m 0700 -p ~vagrant/.ssh
-cat > ~vagrant/.ssh/authorized_keys << EOKEYS
-ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
-EOKEYS
-chmod 600 ~vagrant/.ssh/authorized_keys
-chown -R vagrant:vagrant ~vagrant/.ssh/
-
-%end
-

fedora-cloud-atomic.ks

@@ -1,46 +1,61 @@
-# Fedora Atomic is a cloud-focused spin implementing the Project
-# Atomic patterns.  Note that this replicates the same tree which can
-# now be installed on bare metal.
-
-# This image allocates most space to an LVM-managed thin pool
-# dedicated for Docker containers, and uses docker-storage-setup to
-# dynamically resize storage on boot.
+# Fedora Atomic is a cloud-focused spin implementing the Project Atomic
+# patterns. 
+#
+# RIGHT NOW, this is very like the traditional cloud image -- this is
+# just a starting point.
 
 text
 lang en_US.UTF-8
 keyboard us
 timezone --utc Etc/UTC
 
-auth --useshadow --passalgo=sha512
+auth --useshadow --enablemd5
 selinux --enforcing
 rootpw --lock --iscrypted locked
 user --name=none
 
 firewall --disabled
 
-bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8" --extlinux
 
-network --bootproto=dhcp --device=link --activate --onboot=on
-services --disabled=network
-services --enabled=sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
+network --bootproto=dhcp --device=eth0 --activate --onboot=on
+services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
 
 zerombr
 clearpart --all
 # Atomic differs from cloud - we want LVM
-part /boot --size=300 --fstype="ext4"
-part pv.01 --grow
-volgroup atomicos pv.01
-logvol / --size=3000 --fstype="xfs" --name=root --vgname=atomicos
+autopart
 
-# Equivalent of %include fedora-repo.ks
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/rawhide/ --ref=fedora-atomic/rawhide/x86_64/docker-host
+ostreesetup --nogpg --osname=fedora-atomic-host --remote=installmedia --url=http://compose-x86-02.phx2.fedoraproject.org/compose/atomic/ --ref=fedora-atomic/f21/x86_64/docker-host
 
 reboot
 
+
+
 %post --erroronfail
-# See https://github.com/projectatomic/rpm-ostree/issues/42
-ostree remote delete fedora-atomic
-ostree remote add --set=gpg-verify=false fedora-atomic 'https://dl.fedoraproject.org/pub/fedora/linux/atomic/rawhide/'
+
+# Create grub.conf for EC2. This used to be done by appliance creator but
+# anaconda doesn't do it. And, in case appliance-creator is used, we're
+# overriding it here so that both cases get the exact same file.
+# Note that the console line is different -- that's because EC2 provides
+# different virtual hardware, and this is a convenient way to act differently
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+
+
+#link grub.conf to menu.lst for ec2 to work
+echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
 
 # older versions of livecd-tools do not follow "rootpw --lock" line above
 # https://bugzilla.redhat.com/show_bug.cgi?id=964299
@@ -48,9 +63,34 @@ passwd -l root
 # remove the user anaconda forces us to make
 userdel -r none
 
-# Configure docker-storage-setup to resize the partition table on boot
-# https://github.com/projectatomic/docker-storage-setup/pull/25
-echo 'GROWPART=true' > /etc/sysconfig/docker-storage-setup
+# Kickstart specifies timeout in seconds; syslinux uses 10ths.
+# 0 means wait forever, so instead we'll go with 1.
+sed -i 's/^timeout 10/timeout 1/' /boot/extlinux/extlinux.conf
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# If you want to remove rsyslog and just use journald, remove this!
+echo -n "Disabling persistent journal"
+rmdir /var/log/journal/ 
+echo . 
+
+# this is installed by default but we don't need it in virt
+echo "Removing linux-firmware package."
+yum -C -y remove linux-firmware
+
+# Remove firewalld; was supposed to be optional in F18+, but is required to
+# be present for install/image building.
+echo "Removing firewalld."
+yum -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+
+# Another one needed at install time but not after that, and it pulls
+# in some unneeded deps (like, newt and slang)
+echo "Removing authconfig."
+yum -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
 
 echo -n "Getty fixes"
 # although we want console output going to the serial console, we don't
@@ -109,6 +149,16 @@ echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/random-seed
 
+echo "Cleaning old yum repodata."
+yum history new
+yum clean all
+truncate -c -s 0 /var/log/yum.log
+
+echo "Import RPM GPG key"
+releasever=$(rpm -q --qf '%{version}\n' fedora-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
+
 echo "Packages within this cloud image:"
 echo "-----------------------------------------------------------------------"
 rpm -qa
@@ -116,6 +166,15 @@ echo "-----------------------------------------------------------------------"
 # Note that running rpm recreates the rpm db files which aren't needed/wanted
 rm -f /var/lib/rpm/__db*
 
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/yum
+chattr -i /boot/extlinux/ldlinux.sys
+/usr/sbin/fixfiles -R -a restore
+chattr +i /boot/extlinux/ldlinux.sys
+
 echo "Zeroing out empty space."
 # This forces the filesystem to reclaim space from deleted files
 dd bs=1M if=/dev/zero of=/var/tmp/zeros || :

fedora-cloud-base-vagrant.ks

@@ -1,61 +0,0 @@
-# Like the Cloud Base image, but tuned for vagrant.  Enable
-# the vagrant user, disable cloud-init.
-
-%include fedora-cloud-base.ks
-
-services --disabled=cloud-init,cloud-init-local,cloud-config,cloud-final
-
-# So, to be clear, this gaping security hole is an integral part of how
-# Vagrant works - These images are _not_ supposed to be run in any public-
-# Internet facing way - They are for use on developer setups, almost always
-# with NAT
-user --name=vagrant --password=vagrant
-
-# Suggestion from @purpleidea that most/many vagrant boxes also set root PW
-# to "vagrant" for ease of use.  Again, see comments above.
-rootpw vagrant
-
-# The addition of the net.ifnames=0 and biosdevnames=0 option ensures that
-# even on VirtualBox virt, we get a primary network device with "eth0" as the name
-# This simplifies things and allows a single disk image for both supported Vagrant
-# platforms (virtualbox and kvm)
-bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0" --extlinux
-
-%packages
-# The default koji Vagrantfile configuration uses rsync to sync files between
-# the vagrant host and the guest.  It uses yum to verify that rsync is present
-# and/or install it if it is not.  It will fail without adding the yum compat
-# layer for dnf
-# TODO: Teach vagrant about dnf
-dnf-yum
-# rsync gets installed when the Vagrant box is first launched on the
-# users setup. This can actually take a bit of time.  Just fold it
-# in to the base box disk image
-rsync
-%end
-
-%post --erroronfail
-
-# Work around cloud-init being both disabled and enabled; need
-# to refactor to a common base.
-systemctl mask cloud-init cloud-init-local cloud-config cloud-final
-
-# Vagrant setup
-sed -i 's,Defaults\\s*requiretty,Defaults !requiretty,' /etc/sudoers
-echo 'vagrant ALL=NOPASSWD: ALL' > /etc/sudoers.d/vagrant-nopasswd
-sed -i 's/.*UseDNS.*/UseDNS no/' /etc/ssh/sshd_config
-mkdir -m 0700 -p ~vagrant/.ssh
-cat > ~vagrant/.ssh/authorized_keys << EOKEYS
-ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
-EOKEYS
-chmod 600 ~vagrant/.ssh/authorized_keys
-chown -R vagrant:vagrant ~vagrant/.ssh/
-
-# Further suggestion from @purpleidea (James Shubin) - extend key to root users as well
-mkdir -m 0700 -p /root/.ssh
-cp /home/vagrant/.ssh/authorized_keys /root/.ssh/authorized_keys
-chmod 600 /root/.ssh/authorized_keys
-chown -R root:root /root/.ssh
-
-%end
-

fedora-cloud-base.ks

@@ -7,29 +7,16 @@
 # Note that unlike the standard F20 install, this image has /tmp on disk
 # rather than in tmpfs, since memory is usually at a premium.
 #
-# This kickstart file is designed to be used with ImageFactory (in Koji).
-#
-# To do a local build, you'll need to install ImageFactory.  See
-# http://worknotes.readthedocs.org/en/latest/cloudimages.html for some notes.
-#
-# For a TDL file, I store one here:
-# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
-# (Koji generates one internally...what we really want is Koji to publish it statically)
-# 
-# Once you have imagefactory and imagefactory-plugins installed, run:
-# 
-#   curl -O https://git.fedorahosted.org/cgit/fedora-atomic.git/plain/fedora-atomic-rawhide.tdl 
-#   tempfile=$(mktemp --suffix=.ks)
-#   ksflatten -v F22 -c fedora-cloud-base.ks > ${tempfile}
-#   imagefactory --debug base_image --file-parameter install_script ${tempfile} fedora-atomic-rawhide.tdl
-#
+# This kickstart file is designed to be used with appliance-creator and
+# may need slight modification for use with actual anaconda or other tools.
+# We intend to target anaconda-in-a-vm style image building for F20.
 
-cmdline
+text
 lang en_US.UTF-8
 keyboard us
 timezone --utc Etc/UTC
 
-auth --useshadow --passalgo=sha512
+auth --useshadow --enablemd5
 selinux --enforcing
 rootpw --lock --iscrypted locked
 user --name=none
@@ -43,15 +30,13 @@ services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config
 
 zerombr
 clearpart --all
-part / --size 3000 --fstype ext4 --grow
+part / --size 3000 --fstype ext4
 
 %include fedora-repo.ks
 
 reboot
 
 # Package list.
-# FIXME: instLangs does not work, so there's a hack below
-# (see https://bugzilla.redhat.com/show_bug.cgi?id=1051816)
 %packages --instLangs=en
 
 kernel-core
@@ -115,37 +100,24 @@ rm -f /etc/systemd/system/default.target
 ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
 echo .
 
+# If you want to remove rsyslog and just use journald, remove this!
+echo -n "Disabling persistent journal"
+rmdir /var/log/journal/ 
+echo . 
+
 # this is installed by default but we don't need it in virt
-# Commenting out the following for #1234504
-#echo "Removing linux-firmware package."
-#dnf -C -y erase linux-firmware
+echo "Removing linux-firmware package."
+yum -C -y remove linux-firmware
 
 # Remove firewalld; was supposed to be optional in F18+, but is pulled in
 # in install/image building.
 echo "Removing firewalld."
-# FIXME! clean_requirements_on_remove is the default with DNF, but may
-# not work when package was installed by Anaconda instead of command line.
-# Also -- check if this is still even needed with new anaconda -- disabled
-# firewall should _not_ pull in this package.
-# yum -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
-dnf -C -y erase "firewalld*"
+yum -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
 
 # Another one needed at install time but not after that, and it pulls
 # in some unneeded deps (like, newt and slang)
 echo "Removing authconfig."
-dnf -C -y erase authconfig
-
-# instlang hack. (Note! See bug referenced above package list)
-find /usr/share/locale -mindepth  1 -maxdepth 1 -type d -not -name en_US -exec rm -rf {} +
-localedef --list-archive | grep -v ^en_US | xargs localedef --delete-from-archive
-# this will kill a live system (since it's memory mapped) but should be safe offline
-mv -f /usr/lib/locale/locale-archive /usr/lib/locale/locale-archive.tmpl
-build-locale-archive
-echo '%_install_langs C:en:en_US:en_US.UTF-8' >> /etc/rpm/macros.image-language-conf
-awk '(NF==0&&!done){print "override_install_langs='$LANG'";done=1}{print}' \
-    < /etc/yum.conf > /etc/yum.conf.new
-mv /etc/yum.conf.new /etc/yum.conf
-
+yum -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
 
 echo -n "Getty fixes"
 # although we want console output going to the serial console, we don't
@@ -156,11 +128,9 @@ NAutoVTs=0' /etc/systemd/logind.conf
 
 echo -n "Network fixes"
 # initscripts don't like this file to be missing.
-# and https://bugzilla.redhat.com/show_bug.cgi?id=1204612
 cat > /etc/sysconfig/network << EOF
 NETWORKING=yes
 NOZEROCONF=yes
-DEVTIMEOUT=10
 EOF
 
 # For cloud images, 'eth0' _is_ the predictable device name, since
@@ -206,11 +176,10 @@ echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/random-seed
 
-echo "Cleaning old dnf repodata."
-# FIXME: clear history?
-dnf clean all
-truncate -c -s 0 /var/log/dnf.log
-truncate -c -s 0 /var/log/dnf.rpm.log
+echo "Cleaning old yum repodata."
+yum history new
+yum clean all
+truncate -c -s 0 /var/log/yum.log
 
 echo "Import RPM GPG key"
 releasever=$(rpm -q --qf '%{version}\n' fedora-release)
@@ -225,18 +194,10 @@ echo "-----------------------------------------------------------------------"
 rm -f /var/lib/rpm/__db*
 
 
-# This is a temporary workaround for
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
-# where sfdisk seems to be messing up the mbr.
-# Long-term fix is to address this in anaconda directly and remove this.
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
-dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
-
-
-# FIXME: is this still needed?
 echo "Fixing SELinux contexts."
 touch /var/log/cron
 touch /var/log/boot.log
+mkdir -p /var/cache/yum
 chattr -i /boot/extlinux/ldlinux.sys
 /usr/sbin/fixfiles -R -a restore
 chattr +i /boot/extlinux/ldlinux.sys

fedora-cloud-bigdata.ks

@@ -1,221 +0,0 @@
-# This is a Fedora 21 spin designed based on the Fedora Cloud Base Image
-# but tailored specifically for Big Data processing out-of-the-box.
-# Primarily, it builds on that image but adds extra packages, but over
-# time may have additional focus.
-#
-# It's configured with cloud-init so it will take advantage of
-# ec2-compatible metadata services for provisioning ssh keys. Cloud-init
-# creates a user account named "fedora" with passwordless sudo access. The
-# root password is empty and locked by default.
-#
-# Note that unlike the standard F20 install, this image has /tmp on disk
-# rather than in tmpfs, since memory is usually at a premium.
-
-text
-lang en_US.UTF-8
-keyboard us
-timezone --utc Etc/UTC
-
-auth --useshadow --passalgo=sha512
-selinux --enforcing
-rootpw --lock --iscrypted locked
-user --name=none
-
-firewall --disabled
-
-bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8" --extlinux
-
-network --bootproto=dhcp --device=eth0 --activate --onboot=on
-services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
-
-zerombr
-clearpart --all
-part / --size 3000 --fstype ext4
-
-%include fedora-repo.ks
-
-
-reboot
-
-# Package list.
-%packages
-
-fedora-release-cloud
-
-kernel-core
-@core
-@cloud-server
-
-# Needed initially, but removed below.
-firewalld
-
-# rescue mode generally isn't useful in the cloud context
--dracut-config-rescue
-
-# Some things from @core we can do without in a minimal install
--biosdevname
--plymouth
--NetworkManager
--iprutils
--kbd
--uboot-tools
--kernel
--grub2
-
-%end
-
-
-
-%post --erroronfail
-
-# Create grub.conf for EC2. This used to be done by appliance creator but
-# anaconda doesn't do it. And, in case appliance-creator is used, we're
-# overriding it here so that both cases get the exact same file.
-# Note that the console line is different -- that's because EC2 provides
-# different virtual hardware, and this is a convenient way to act differently
-echo -n "Creating grub.conf for pvgrub"
-rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
-mkdir /boot/grub
-echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
-for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
-  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
-  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
-  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
-  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
-  echo
-done
-
-
-#link grub.conf to menu.lst for ec2 to work
-echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
-ln -sf grub.conf /boot/grub/menu.lst
-ln -sf /boot/grub/grub.conf /etc/grub.conf
-
-# older versions of livecd-tools do not follow "rootpw --lock" line above
-# https://bugzilla.redhat.com/show_bug.cgi?id=964299
-passwd -l root
-# remove the user anaconda forces us to make
-userdel -r none
-
-# Kickstart specifies timeout in seconds; syslinux uses 10ths.
-# 0 means wait forever, so instead we'll go with 1.
-sed -i 's/^timeout 10/timeout 1/' /boot/extlinux/extlinux.conf
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-# this is installed by default but we don't need it in virt
-echo "Removing linux-firmware package."
-yum -C -y remove linux-firmware
-
-# Remove firewalld; was supposed to be optional in F18+, but is required to
-# be present for install/image building.
-echo "Removing firewalld."
-yum -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
-
-# Another one needed at install time but not after that, and it pulls
-# in some unneeded deps (like, newt and slang)
-echo "Removing authconfig."
-yum -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
-
-echo -n "Getty fixes"
-# although we want console output going to the serial console, we don't
-# actually have the opportunity to login there. FIX.
-# we don't really need to auto-spawn _any_ gettys.
-sed -i '/^#NAutoVTs=.*/ a\
-NAutoVTs=0' /etc/systemd/logind.conf
-
-echo -n "Network fixes"
-# initscripts don't like this file to be missing.
-cat > /etc/sysconfig/network << EOF
-NETWORKING=yes
-NOZEROCONF=yes
-EOF
-
-# For cloud images, 'eth0' _is_ the predictable device name, since
-# we don't want to be tied to specific virtual (!) hardware
-rm -f /etc/udev/rules.d/70*
-ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
-
-# simple eth0 config, again not hard-coded to the build hardware
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-
-# generic localhost names
-cat > /etc/hosts << EOF
-127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
-
-EOF
-echo .
-
-
-# Because memory is scarce resource in most cloud/virt environments,
-# and because this impedes forensics, we are differing from the Fedora
-# default of having /tmp on tmpfs.
-echo "Disabling tmpfs for /tmp."
-systemctl mask tmp.mount
-
-# make sure firstboot doesn't start
-echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
-
-# Uncomment this if you want to use cloud init but suppress the creation
-# of an "ec2-user" account. This will, in the absence of further config,
-# cause the ssh key from a metadata source to be put in the root account.
-#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
-#users: []
-#disable_root: 0
-#EOF
-
-echo "Removing random-seed so it's not the same in every image."
-rm -f /var/lib/random-seed
-
-echo "Cleaning old yum repodata."
-yum history new
-yum clean all
-truncate -c -s 0 /var/log/yum.log
-
-echo "Import RPM GPG key"
-releasever=$(rpm -q --qf '%{version}\n' fedora-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
-
-echo "Packages within this cloud image:"
-echo "-----------------------------------------------------------------------"
-rpm -qa
-echo "-----------------------------------------------------------------------"
-# Note that running rpm recreates the rpm db files which aren't needed/wanted
-rm -f /var/lib/rpm/__db*
-
-# This is a temporary workaround for
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
-# where sfdisk seems to be messing up the mbr.
-# Long-term fix is to address this in anaconda directly and remove this.
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
-dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
-
-
-echo "Fixing SELinux contexts."
-touch /var/log/cron
-touch /var/log/boot.log
-mkdir -p /var/cache/yum
-chattr -i /boot/extlinux/ldlinux.sys
-/usr/sbin/fixfiles -R -a restore
-chattr +i /boot/extlinux/ldlinux.sys
-
-echo "Zeroing out empty space."
-# This forces the filesystem to reclaim space from deleted files
-dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
-rm -f /var/tmp/zeros
-echo "(Don't worry -- that out-of-space error was expected.)"
-
-%end
-

fedora-cloud-experimental.ks

@@ -7,7 +7,7 @@ lang en_US.UTF-8
 keyboard us
 timezone --utc Etc/UTC
 
-auth --useshadow --passalgo=sha512
+auth --useshadow --enablemd5
 selinux --enforcing
 rootpw --lock --iscrypted locked
 user --name=none
@@ -98,6 +98,11 @@ rm -f /etc/systemd/system/default.target
 ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
 echo .
 
+# If you want to remove rsyslog and just use journald, remove this!
+echo -n "Disabling persistent journal"
+rmdir /var/log/journal/ 
+echo . 
+
 # this is installed by default but we don't need it in virt
 echo "Removing linux-firmware package."
 yum -C -y remove linux-firmware
@@ -187,14 +192,6 @@ echo "-----------------------------------------------------------------------"
 rm -f /var/lib/rpm/__db*
 
 
-# This is a temporary workaround for
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
-# where sfdisk seems to be messing up the mbr.
-# Long-term fix is to address this in anaconda directly and remove this.
-# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
-dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
-
-
 echo "Fixing SELinux contexts."
 touch /var/log/cron
 touch /var/log/boot.log

fedora-desktop-packages.ks

@@ -0,0 +1,24 @@
+%packages
+@firefox
+@gnome-desktop
+@libreoffice
+@networkmanager-submodules
+
+# FIXME; apparently the glibc maintainers dislike this, but it got put into the
+# desktop image at some point.  We won't touch this one for now.
+nss-mdns
+
+# This one needs to be kicked out of @standard
+-smartmontools
+
+# We use gnome-control-center's printer and input sources panels instead
+-system-config-printer
+-im-chooser
+
+# Similarly, there was also some debate about removing rsyslog from @standard
+# (since much of its functionality is provided by journald now), but it's
+# not going to happen for f20 either, so drop it here for now.
+# https://lists.fedoraproject.org/pipermail/devel/2013-July/186796.html
+-rsyslog
+
+%end

fedora-docker-base.ks

@@ -2,26 +2,14 @@
 #
 # To keep this image minimal it only installs English language. You need to change
 # yum configuration in order to enable other languages.
-#
-###  Hacking on this image ###
-# This kickstart is processed using Anaconda-in-ImageFactory (via Koji typically),
-# but you can run imagefactory locally too.
-#
-# To do so, testing local changes, first you'll need a TDL file.  I store one here:
-# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
-# 
-# Then, once you have imagefactory and imagefactory-plugins installed, run:
-# 
-#   imagefactory --debug target_image --template /path/to/fedora-atomic-rawhide.tdl --parameter offline_icicle true --file-parameter install_script $(pwd)/fedora-docker-base.ks docker
-#
 
 cmdline
-bootloader --disabled
-timezone --isUtc --nontp Etc/UTC
-rootpw --lock --iscrypted locked
-user --name=none
+bootloader --location=none
+timezone America/New_York --isUtc --nontp
+rootpw --plaintext qweqwe
 
 keyboard us
+firewall --disable
 zerombr
 clearpart --all
 part / --size 3000 --fstype ext4
@@ -31,10 +19,8 @@ reboot
 %packages --excludedocs --instLangs=en --nocore
 bash
 fedora-release
-rootfiles
 vim-minimal
-dnf
-dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
+yum
 #fakesystemd #TODO: waiting for review https://bugzilla.redhat.com/show_bug.cgi?id=1118740
 -kernel
 
@@ -45,9 +31,6 @@ dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
 # Set the language rpm nodocs transaction flag persistently in the
 # image yum.conf and rpm macros
 
-# remove the user anaconda forces us to make
-userdel -r none
-
 LANG="en_US"
 echo "%_install_lang $LANG" > /etc/rpm/macros.image-language-conf
 
@@ -61,20 +44,7 @@ basearch=$(uname -i)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
 
 rm -f /usr/lib/locale/locale-archive
-
-#Setup locale properly
-localedef -v -c -i en_US -f UTF-8 en_US.UTF-8
-
 rm -rf /var/cache/yum/*
 rm -f /tmp/ks-script*
 
-#Make it easier for systemd to run in Docker container
-cp /usr/lib/systemd/system/dbus.service /etc/systemd/system/
-sed -i 's/OOMScoreAdjust=-900//' /etc/systemd/system/dbus.service
-
-#Mask mount units and getty service so that we don't get login prompt
-systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service
-
-rm -f /etc/machine-id
-
 %end

fedora-install-cloud.ks

@@ -16,12 +16,12 @@
 # use the source repo, we can't just include fedora-repo.ks
 
 # In the master branch the rawhide repo commands should be uncommented.
-#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
-#repo --name=rawhide-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
+#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch
+#repo --name=rawhide-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch
 
 # In non-master branches the fedora repo commands should be uncommented
-repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
-repo --name=fedora-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
+repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch
+repo --name=fedora-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch
 
 # Package manifest for the compose.  Uses repo group metadata to translate groups.
 # (default groups for the configured repos are added by --default)
@@ -56,9 +56,6 @@ dracut-*
 
 # Things needed for installation
 @anaconda-tools
-fedora-productimg-cloud
--fedora-productimg-server
--fedora-productimg-workstation
 
 # Packages to enable server images to run in cloud environments
 @cloud-server

fedora-install-server.ks

@@ -16,22 +16,18 @@
 # use the source repo, we can't just include fedora-repo.ks
 
 # In the master branch the rawhide repo commands should be uncommented.
-#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
-#repo --name=rawhide-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
+#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch
+#repo --name=rawhide-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch
 
 # In non-master branches the fedora repo commands should be uncommented
-repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
-repo --name=fedora-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
+repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch
+repo --name=fedora-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch
 
 # Package manifest for the compose.  Uses repo group metadata to translate groups.
 # (default groups for the configured repos are added by --default)
 # @base got renamed to @standard, but @base is still included by default by pungi.
 %packages --default
 
--fedora-productimg-cloud
-fedora-productimg-server
--fedora-productimg-workstation
-
 # pungi is an inclusive depsolver so that multiple packages are brought 
 # in to satisify dependencies and we don't always want that. So we  use
 # an exclusion list to cut out things we don't want
@@ -72,6 +68,13 @@ dracut-*
 @core
 @hardware-support
 
+# Some development tools
+@development-libs
+@development-tools
+@c-development
+@rpm-development-tools
+@fedora-packager
+
 # Fedora Server.
 # Including this causes the fedora-release-server package to be included,
 # which in turn enables server-product-environment, and due to to its priority
@@ -81,7 +84,6 @@ dracut-*
 @headless-management
 @container-management
 @domain-client
-@server-hardware-support
 
 # Common server packages
 @mysql
@@ -121,7 +123,6 @@ dracut-*
 
 # Things needed for installation
 @anaconda-tools
-fedora-productimg-server
 
 # Langpacks
 autocorr-*

fedora-install-workstation.ks

@@ -16,12 +16,12 @@
 # use the source repo, we can't just include fedora-repo.ks
 
 # In the master branch the rawhide repo commands should be uncommented.
-#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
-#repo --name=rawhide-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
+#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch
+#repo --name=rawhide-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch
 
 # In non-master branches the fedora repo commands should be uncommented
-repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
-repo --name=fedora-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
+repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch
+repo --name=fedora-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch
 
 %include fedora-workstation-packages.ks
 
@@ -44,8 +44,5 @@ kernel*
 
 # Things needed for installation
 @anaconda-tools
--fedora-productimg-cloud
--fedora-productimg-server
-fedora-productimg-workstation
 
 %end

fedora-kde-packages.ks

@@ -2,7 +2,6 @@
 @kde-apps
 @kde-desktop
 @kde-media
-@kde-office
 @kde-telepathy
 @networkmanager-submodules
 
@@ -17,9 +16,5 @@ mariadb-embedded
 mariadb-libs
 mariadb-server
 
-# minimal localization support - allows installing the kde-l10n-* packages
-system-config-language
-kde-l10n
-
 %end
 

fedora-live-astronomy_kde.ks

@@ -1,164 +0,0 @@
-#fedora-live-astronomy-kde.ks
-# With KDE Desktop
-
-# Fedora Astronomy: For astronomers and astrophysicists
-# Fedora-Astronomy aims to create a Fedora which has the generic
-# toolset for the astronomer
-#
-# Web: https://fedoraproject.org/wiki/SIGs/Astronomy/AstroSpin
-#
-# Partly based on Scientific KDE Spin 
-#     https://fedoraproject.org/wiki/Scientific_Spin
-#
-
-# Maintainer: Christian Dersch <lupinix@fedoraproject.org>
-#             https://fedoraproject.org/wiki/User:Lupinix
-
-%include fedora-live-kde.ks
-
-# The recommended part size for DVDs is too close to use for the astronomy spin
-part / --size 12288
-
-%packages
-
-# Installing the default/mandatory packages from engineering & scientific
-@engineering-and-scientific
-
-# astronomical data analysis
-cdsclient
-fpack
-gcx
-psfex
-saoimage
-scamp
-sextractor
-siril
-skyviewer
-swarp
-
-# Observatory: KStars + INDI drivers + Skychart
-indi-aagcloudwatcher
-indi-apogee
-indi-eqmod
-indi-gphoto
-indi-sx
-kstars
-skychart
-skychart-data-dso
-skychart-data-stars
-stellarium
-
-# misc. astronomy
-celestia
-xvarstar
-
-# Some astro environment stuff
-astronomy-bookmarks
-astronomy-menus
-astronomy-menus-toplevel
-
-#Devel tools
-
-#Install the mandatory packages from dev-tools and dev-libs
-# C/C++ compiler, gdb, autotools, bison, flex, make, strace..
-@development-tools
-@development-libs
-@c-development
-@rpm-development-tools
-# for astronomy
-cfitsio-devel
-CCfits-devel
-libnova-devel
-wcslib-devel
-
-
-#python 2 tools/libraries not included from the groups
-python-tools
-python-ipython
-python-ipython-console
-python-ipython-notebook
-sympy
-python-networkx
-python-pandas
-# Python astronomy
-astropy-tools
-python-astropy
-python-astroML
-python-photutils
-python-sep
-pyephem
-APLpy
-ATpy
-
-
-#python 3 and tools/libraries not included from the groups
-python3
-python3-tools
-python3-matplotlib
-python3-scipy
-python3-numpy
-python3-ipython
-python3-ipython-console
-python3-ipython-notebook
-python3-sympy
-python3-networkx
-python3-pandas
-# Python 3 astronomy
-python3-astropy
-python3-astroML
-python3-APLpy
-python3-ATpy
-python3-photutils
-python3-sep
-
-# matplotlib backends
-python-matplotlib-qt4
-python-matplotlib-qt5
-python-matplotlib-tk
-python3-matplotlib-qt4
-python3-matplotlib-qt5
-python3-matplotlib-tk
-
-
-# Python IDE very useful for scientific use
-spyder
-
-
-#Version control- a GUI for each as well
-
-# Installing rapidsvn will also install subversion package
-rapidsvn 
-git
-git-gui
-# Mercurial
-mercurial
-mercurial-hgk
-
-#Backup Utilities
-backintime-kde
-
-#Drawing, Picture viewing tools, Visualization tools
-dia
-gimp
-inkscape
-kst
-kst-docs
-kst-fits
-scidavis
-
-#Misc. Utils
-ImageMagick
-kate
-kate-plugins
-rlwrap
-screen
-
-# Omit KDE 4 translations for now: https://bugzilla.redhat.com/show_bug.cgi?id=1197940
--kde-l10n-*
--calligra-l10n-*
-
-%end
-
-%post
-
-%end

fedora-live-base.ks

@@ -10,11 +10,11 @@
 lang en_US.UTF-8
 keyboard us
 timezone US/Eastern
-auth --useshadow --passalgo=sha512
+auth --useshadow --enablemd5
 selinux --enforcing
 firewall --enabled --service=mdns
 xconfig --startxonboot
-part / --size 4096 --fstype ext4
+part / --size 3072 --fstype ext4
 services --enabled=NetworkManager --disabled=network,sshd
 
 %include fedora-repo.ks
@@ -47,9 +47,6 @@ anaconda
 # Need aajohan-comfortaa-fonts for the SVG rnotes images
 aajohan-comfortaa-fonts
 
-# Without this, initramfs generation during live image creation fails: #1242586
-dracut-live
-
 %end
 
 %post
@@ -196,9 +193,6 @@ systemctl --no-reload disable atd.service 2> /dev/null || :
 systemctl stop crond.service 2> /dev/null || :
 systemctl stop atd.service 2> /dev/null || :
 
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
 # Mark things as configured
 touch /.liveimg-configured
 
@@ -304,15 +298,6 @@ rm -f /core*
 # convince readahead not to collect
 # FIXME: for systemd
 
-# forcibly regenerate fontconfig cache (so long as this live image has
-# fontconfig) - see #1169979
-if [ -x /usr/bin/fc-cache ] ; then
-   fc-cache -f
-fi
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
 %end
 
 

fedora-live-cinnamon.ks

@@ -1,55 +0,0 @@
-# fedora-live-cinnamon.ks
-#
-# Description:
-# - Fedora Live Spin with the Cinnamon Desktop Environment
-#
-# Maintainer(s):
-# - Dan Book <grinnz@grinnz.com>
-
-%include fedora-live-base.ks
-%include fedora-live-minimization.ks
-%include fedora-cinnamon-packages.ks
-
-part / --size=6144
-
-%post
-# cinnamon configuration
-
-# create /etc/sysconfig/desktop (needed for installation)
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-# exclude GNOME-specific menu items
-desktop-file-edit --set-key=NoDisplay --set-value=true /usr/share/applications/fedora-release-notes.webapp.desktop
-desktop-file-edit --set-key=NoDisplay --set-value=true /usr/share/applications/yelp.desktop
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set Cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Show harddisk install on the desktop
-sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-
-# and mark it as executable
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# this goes at the end after all other changes. 
-chown -R liveuser:liveuser /home/liveuser
-restorecon -R /home/liveuser
-
-EOF
-
-%end
-
-

fedora-live-design_suite.ks

@@ -1,5 +1,5 @@
 # fedora-design-suite.ks
-# Based on Live Workstation
+# Based on Live Desktop
 # Description:
 # - A Spin targeted towards professional designers
 # Website: http://fedoraproject.org/wiki/Design_Suite
@@ -7,25 +7,24 @@
 # - Luya Tshimbalanga <luya AT fedoraproject DOT org>
 # - Previous maintainer Sebastian Dziallas
 
-%include fedora-live-workstation.ks
+%include fedora-live-desktop.ks
 
 #DVD size partition
 part / --size 8192
 
 %packages
+
 # graphics
 blender
-LuxRender-blender
-YafaRay-blender
 bluefish 
-colord-extra-profiles
+#cinepaint
+cmyktool
 darktable
 dia
 entangle
 fontforge
 font-manager 
 gimp
-gimp-elsamuko
 gimp-*-plugin
 gimp-data-extras
 gimp-gap
@@ -35,33 +34,26 @@ gimp-normalmap
 gimp-resynthesizer
 gimp-separate+
 gpick
-GraphicsMagick
-gmic-gimp
+GREYCstoration-gimp 
 hugin 
-ImageMagick
-inkscape
-inkscape-sozi
-inkscape-table
 mypaint
+inkscape
 nautilus-image-converter
 optipng
 phatch
 screenruler
 simple-scan
 scribus
-shutter
+colord-extra-profiles 
 synfigstudio
 xournal
 
 # office
 vym
-pdfmod
 pdfshuffler  
 
 # internet
 filezilla
-sparkleshare
-sshpass
 
 # audio & video
 audacity
@@ -72,23 +64,45 @@ aajohan-comfortaa-fonts
 adobe-source-sans-pro-fonts
 campivisivi-titillium-fonts
 lato-fonts
-open-sans-fonts
 overpass-fonts
 
-# removal of unneeded applications
+# removal of duplicated and unneeded applications
 -gnome-boxes
 -gthumb
 -eog
 -gnome-photos
 -rdesktop
 
+# Legacy cmdline things we don't want
+-krb5-auth-dialog
+-krb5-workstation
+-pam_krb5
+-quota
+-minicom
+-dos2unix
+-finger
+-ftp
+-jwhois
+-mtr
+-pinfo
+-rsh
+-telnet
+-nfs-utils
+-ypbind
+-yp-tools
+-rpcbind
+-acpid
+-ntsysv
+
 %end
 
 %post
 #Override the favorite desktop application in Dash
 cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
 [org.gnome.shell]
-favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'shotwell.desktop', 'gimp.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
+#Enable categories in Gnome Shell
+app-folder-categories=['Utilities', 'Games', 'Sundry', 'Office', 'Network', 'Internet', 'Graphics', 'Multimedia', 'System', 'Development', 'Accessories', 'System Settings', 'wine-wine', 'Crossover', 'Crossover Games', 'Science', 'Education', 'Universal Access', 'Other']
 FOE
 
 # Add link to lists of tutorials
@@ -104,34 +118,10 @@ Categories=Graphics;Documentation;
 FOE
 chmod a+x /usr/share/applications/list-design-tutorials.desktop
 
-# Add information about Fedora Design Suite
-cat >> /usr/share/applications/fedora-design-suite.desktop << FOE
-[Desktop Entry]
-Name=Design Suite Info
-GenericName=About Design Suite
-Comment=Wiki page of Design Suite
-Exec=xdg-open http://fedoraproject.org/wiki/Design_Suite
-Type=Application
-Icon=applications-internet
-Categories=Documentation;
-FOE
-chmod a+x /usr/share/applications/fedora-design-suite.desktop
-
-# Add information about Fedora Design Team
-cat >> /usr/share/applications/fedora-design-team.desktop << FOE
-[Desktop Entry]
-Name=Design Team Info
-GenericName=About Design Team 
-Comment=Wiki page of Design Team
-Exec=xdg-open http://fedoraproject.org/wiki/Design
-Type=Application
-Icon=applications-internet
-Categories=Documentation;
-FOE
-chmod a+x /usr/share/applications/fedora-design-team.desktop
-
 # rebuild schema cache with any overrides we installed
 glib-compile-schemas /usr/share/glib-2.0/schemas
 
+#EOF
+
 %end
 

fedora-live-desktop.ks

@@ -0,0 +1,65 @@
+# Maintained by the Fedora Desktop SIG:
+# http://fedoraproject.org/wiki/SIGs/Desktop
+# mailto:desktop@lists.fedoraproject.org
+
+%include fedora-live-base.ks
+%include fedora-desktop-packages.ks
+
+part / --size 4096
+
+%post
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable updates plugin
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'empathy.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'libreoffice-writer.desktop', 'nautilus.desktop', 'gnome-documents.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+
+EOF
+
+%end

fedora-live-jam_kde.ks

@@ -199,12 +199,12 @@ thunderbird
 %post
 
 #setup kickoff favorites
-/bin/mkdir -p /etc/skel/.config
+/bin/mkdir -p /etc/skel/.kde/share/config
 
-JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/pavucontrol.desktop,/usr/share/applications/kde4/kfmclient_html.desktop,/usr/share/applications/kde4/Kontact.desktop,/usr/share/applications/kde4/ktp-contactlist.desktop
+JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/kde4/konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/kde4/systemsettings.desktop
 JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,$JAMFAVORITES
 
-cat <<EOF  >> /etc/skel/.config/kickoffrc
+cat <<EOF  >> /etc/skel/.kde/share/config/kickoffrc
 [Favorites]
 FavoriteURLs=$JAMFAVORITES
 EOF

fedora-live-kde-base.ks

@@ -13,16 +13,16 @@ DESKTOP="KDE"
 DISPLAYMANAGER="KDE"
 EOF
 
-# set default GTK+ theme for root (see #683855, #689070, #808062)
+# make oxygen-gtk the default GTK+ theme for root (see #683855, #689070, #808062)
 cat > /root/.gtkrc-2.0 << EOF
-include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
+include "/usr/share/themes/oxygen-gtk/gtk-2.0/gtkrc"
 include "/etc/gtk-2.0/gtkrc"
-gtk-theme-name="Adwaita"
+gtk-theme-name="oxygen-gtk"
 EOF
 mkdir -p /root/.config/gtk-3.0
 cat > /root/.config/gtk-3.0/settings.ini << EOF
 [Settings]
-gtk-theme-name = Adwaita
+gtk-theme-name = oxygen-gtk
 EOF
 
 # add initscript
@@ -40,22 +40,17 @@ chmod a+x /home/liveuser/.xsession
 chown liveuser:liveuser /home/liveuser/.xsession
 
 # set up autologin for user liveuser
-if [ -f /etc/sddm.conf ]; then
-sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
-sed -i 's/^#Session=.*/Session=plasma.desktop/' /etc/sddm.conf
-else
-cat > /etc/sddm.conf << SDDM_EOF
-[Autologin]
-User=liveuser
-Session=plasma.desktop
-SDDM_EOF
-fi
+sed -i 's/^AutoUser=.*/AutoUser=liveuser/' /etc/sddm.conf
+
+# set up user liveuser as default user and preselected user
+sed -i 's/^LastUser=.*/LastUser=liveuser/' /etc/sddm.conf
+sed -i 's/^LastSession=.*/LastSession=kde-plasma.desktop/' /etc/sddm.conf
 
 # add liveinst.desktop to favorites menu
-mkdir -p /home/liveuser/.config/
-cat > /home/liveuser/.config/kickoffrc << MENU_EOF
+mkdir -p /home/liveuser/.kde/share/config/
+cat > /home/liveuser/.kde/share/config/kickoffrc << MENU_EOF
 [Favorites]
-FavoriteURLs=/usr/share/applications/kde4/konqbrowser.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
+FavoriteURLs=/usr/share/applications/kde4/konqbrowser.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/kde4/systemsettings.desktop,/usr/share/applications/liveinst.desktop
 MENU_EOF
 
 # show liveinst.desktop on desktop and in menu
@@ -80,13 +75,23 @@ cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
 Driver=QSQLITE3
 AKONADI_EOF
 
-# Disable plasma-pk-updates
-sed -i \
-    -e "s|^X-KDE-PluginInfo-EnabledByDefault=true|X-KDE-PluginInfo-EnabledByDefault=false|g" \
-    /usr/share/kservices5/plasma-applet-org.kde.plasma.pkupdates.desktop
+# Disable the update notifications of apper 
+cat > /home/liveuser/.kde/share/config/apper << APPER_EOF
+[CheckUpdate]
+autoUpdate=0
+distroUpgrade=0
+interval=0
+APPER_EOF
+
+# Disable some kded modules
+# apperd: http://bugzilla.redhat.com/948099
+cat > /home/liveuser/.kde/share/config/kdedrc << KDEDRC_EOF
+[Module-apperd]
+autoload=false
+KDEDRC_EOF
 
 # Disable baloo
-cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
+cat > /home/liveuser/.kde/share/config/baloofilerc << BALOO_EOF
 [Basic Settings]
 Indexing-Enabled=false
 BALOO_EOF
@@ -97,10 +102,24 @@ cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
 Enabled=false
 KRES_EOF
 
+# Disable nepomuk
+cat > /home/liveuser/.kde/share/config/nepomukserverrc << NEPOMUK_EOF
+[Basic Settings]
+Start Nepomuk=false
+
+[Service-nepomukfileindexer]
+autostart=false
+NEPOMUK_EOF
+
 # make sure to set the right permissions and selinux contexts
 chown -R liveuser:liveuser /home/liveuser/
 restorecon -R /home/liveuser/
 
+# small hack to enable plasma-netbook workspace on boot
+if strstr "\`cat /proc/cmdline\`" netbook ; then
+   mv /usr/share/autostart/plasma-desktop.desktop /usr/share/autostart/plasma-netbook.desktop
+   sed -i 's/desktop/netbook/g' /usr/share/autostart/plasma-netbook.desktop
+fi
 EOF
 
 %end

fedora-live-kde.ks

@@ -1,7 +1,8 @@
-# fedora-livecd-kde.ks
+# fedora-live-kde.ks
 #
 # Description:
-# - Fedora Live Spin with the K Desktop Environment (KDE), default 1.4 GB version
+# - Fedora Live Spin with the K Desktop Environment (KDE), 2 GiB version
+#   see fedora-livecd-kde.ks for the default 1 GiB version
 #
 # Maintainer(s):
 # - Sebastian Vahl <fedora@deadbabylon.de>
@@ -11,62 +12,54 @@
 %include fedora-live-minimization.ks
 
 # DVD payload
-part / --size=6144
+part / --size=8192
 
 
 %packages
-# unwanted packages from @kde-desktop
-# don't include these for now to fit on a cd
+# ship KDE wallpapers instead of GNOME ones
 -desktop-backgrounds-basic
--kdeaccessibility*
--kdeartwork-screensavers	# screensavers are not needed on live images
-#-ktorrent			# kget has also basic torrent features (~3 megs)
--digikam			# digikam has duplicate functionality with gwenview (~28 megs)
-#-amarok 			# ~23 megs (mysql-embedded etc.)
--kipi-plugins			# ~8 megs + drags in Marble
-#-kdeplasma-addons		# ~16 megs
-#-krusader			# ~4 megs
+kde-wallpapers
 
-# Additional packages that are not default in kde-* groups, but useful
+# Additional packages that are not default in kde-desktop but useful
 k3b				# ~15 megs
+calligra
 #kdeartwork			# only include some parts of kdeartwork
+#twinkle			# (~10 megs)
 fuse
 liveusb-creator
+#pavucontrol			# pavucontrol has duplicate functionality with kmix
+krusader			# file manager, more power-user-oriented than Dolphin (~4 megs)
 
-# only include kdegames-minimal
--kdegames
-kdegames-minimal
+# kdeedu apps
+blinken
+kalzium
+kanagram
+kgeography
+khangman
+kiten
+klettres
+ktouch
+kturtle
+kwordquiz
+parley
+step
+marble
+kstars
+kalgebra
+kbruch
+kig
+kmplot
+rocs
+cantor
 
-### space issues
+# Cantor backends
+cantor-R		# Cantor R backend, built against R-core at compile time
+maxima			# runtime dependency of the Cantor Maxima backend
+octave			# runtime dependency of the Cantor Octave backend
 
-# fonts (we make no bones about admitting we're english-only)
-wqy-microhei-fonts			# a compact CJK font, to replace:
--naver-nanum-gothic-fonts		# Korean
--vlgothic-fonts				# Japanese
--adobe-source-han-sans-cn-fonts		# simplified Chinese
--adobe-source-han-sans-twhk-fonts	# traditional Chinese
-
--paratype-pt-sans-fonts	# Cyrillic (already supported by DejaVu), huge
-#-stix-fonts		# mathematical symbols
-
-# remove input methods to free space
--@input-methods
--scim*
--m17n*
--ibus*
--iok
-
-# save some space (from @standard)
--make
-
-# admin-tools
--gnome-disk-utility
-# kcm_clock still lacks some features, so keep system-config-date around
-#-system-config-date
-# prefer kcm_systemd
--system-config-services
-# prefer/use kusers
--system-config-users
+# KDE 4 translations
+kde-l10n-*
+calligra-l10n-*
 
 ## avoid serious bugs by omitting broken stuff
 

fedora-live-mate_compiz.ks

@@ -1,50 +1,11 @@
-# Desktop with customizations to fit in a CD (package removals, etc.)
 # Maintained by the Fedora Desktop SIG:
 # http://fedoraproject.org/wiki/SIGs/Desktop
 # mailto:desktop@lists.fedoraproject.org
 
 %include fedora-live-base.ks
 %include fedora-mate-packages.ks
-%include fedora-live-minimization.ks
 
-part / --size 6144
-
-%packages
-
-# Drop things for size
--@3d-printing
--brasero
--colord
--fedora-icon-theme
--GConf2
--gnome-bluetooth-libs
--gnome-icon-theme
--gnome-icon-theme-symbolic
--gnome-software
--gnome-themes
--gnome-themes-standard
--gnome-user-docs
-
--@mate-applications
--mate-icon-theme-faenza
-
-# Drop oversized fonts that aren't needed
-
-# Drop things that pull in perl
-
-# Dictionaries are big
-# we're going to try keeping hunspell-* after notting, davidz, and ajax voiced
-# strong preference to giving it a go on #fedora-desktop.
-# also see http://bugzilla.gnome.org/681084
-
-# Help and art can be big, too
--gnome-user-docs
--evolution-help
-
-# Legacy cmdline things we don't want
--telnet
-
-%end
+part / --size 4096 
 
 %post
 cat >> /etc/rc.d/init.d/livesys << EOF
@@ -58,6 +19,9 @@ fi
 mkdir /home/liveuser/Desktop
 cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
 
+# temporarily fix for theme issue with anaconda rhbz (#1136994)
+sed -i "s/^gtk-theme='BlueMenta'/gtk-theme='Adwaita'/" /usr/share/glib-2.0/schemas/mate-fedora.gschema.override
+
 # rebuild schema cache with any overrides we installed
 glib-compile-schemas /usr/share/glib-2.0/schemas
 
@@ -79,7 +43,4 @@ chown -R liveuser:liveuser /home/liveuser/
 restorecon -R /home/liveuser/
 EOF
 
-# This is a huge file and things work ok without it
-rm -f /usr/share/icons/HighContrast/icon-theme.cache
-
 %end

fedora-live-workstation.ks

@@ -43,11 +43,6 @@ FOE
     cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
     cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
   fi
-
-  # Copy Anaconda branding in place
-  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
-    cp -a /usr/share/lorax/product/* /
-  fi
 fi
 
 # rebuild schema cache with any overrides we installed

fedora-livecd-desktop.ks

@@ -0,0 +1,112 @@
+# Desktop with customizations to fit in a CD (package removals, etc.)
+# Maintained by the Fedora Desktop SIG:
+# http://fedoraproject.org/wiki/SIGs/Desktop
+# mailto:desktop@lists.fedoraproject.org
+
+%include fedora-live-desktop.ks
+%include fedora-live-minimization.ks
+
+%packages
+# reduce the office suite in size
+-planner
+-libreoffice-xsltfilter
+-libreoffice-pyuno
+-libreoffice-emailmerge
+-libreoffice-math
+
+# remove some other applications
+-gnome-boxes
+-gnome-dictionary
+
+# remove input method things we don't need
+-ibus-typing-booster
+-imsettings
+-imsettings-gsettings
+
+# Drop the Java plugin
+-icedtea-web
+-java-1.8.0-openjdk
+
+# Drop things that pull in perl
+-linux-atm
+
+# No printing
+-foomatic-db-ppds
+-foomatic
+
+# we don't want prelink
+-prelink
+
+# Dictionaries are big
+# we're going to try keeping hunspell-* after notting, davidz, and ajax voiced
+# strong preference to giving it a go on #fedora-desktop.
+# also see http://bugzilla.gnome.org/681084
+-aspell-*
+-man-pages*
+-words
+
+# Help and art and fonts can be big, too
+-evolution-help
+-desktop-backgrounds-basic
+-*backgrounds-extras
+-stix-fonts
+
+# Legacy and cmdline things we don't want
+-krb5-auth-dialog
+-krb5-workstation
+-pam_krb5
+-quota
+-nano
+-minicom
+-dos2unix
+-finger
+-ftp
+-jwhois
+-mtr
+-pinfo
+-rsh
+-telnet
+-nfs-utils
+-ypbind
+-yp-tools
+-rpcbind
+-acpid
+-ntsysv
+-rmt
+-talk
+-lftp
+-tcpdump
+-dump
+
+# Drop some system-config things
+-system-config-language
+-system-config-rootpassword
+-system-config-services
+-policycoreutils-gui
+
+# These things are cut purely for space reasons
+-aisleriot
+-brasero
+-brasero-nautilus
+-bijiben
+-gnome-system-log
+-deja-dup
+-eog
+-gnu-free-mono-fonts
+-gnu-free-sans-fonts
+-gnu-free-serif-fonts
+-uboot-tools
+-dtc
+
+# Without gnu freefonts, the lack of Malayalam coverage is
+# a problem in anaconda (#977764)
+lohit-malayalam-fonts
+
+%end
+
+%post
+
+# This is a huge file and things work ok without it
+rm -f /usr/share/icons/HighContrast/icon-theme.cache
+
+%end

fedora-livecd-kde.ks

@@ -0,0 +1,83 @@
+# fedora-livecd-kde.ks
+#
+# Description:
+# - Fedora Live Spin with the K Desktop Environment (KDE), default 1 GB version
+#
+# Maintainer(s):
+# - Sebastian Vahl <fedora@deadbabylon.de>
+# - Fedora KDE SIG, http://fedoraproject.org/wiki/SIGs/KDE, kde@lists.fedoraproject.org
+
+%include fedora-live-kde-base.ks
+%include fedora-live-minimization.ks
+
+# DVD payload
+part / --size=4096
+
+
+%packages
+# unwanted packages from @kde-desktop
+# don't include these for now to fit on a cd
+-desktop-backgrounds-basic
+-kdeaccessibility*
+-scribus			# scribus is too big for the live images
+-kdeartwork-screensavers	# screensavers are not needed on live images
+#-ktorrent			# kget has also basic torrent features (~3 megs)
+-digikam			# digikam has duplicate functionality with gwenview (~28 megs)
+#-amarok 			# ~23 megs (mysql-embedded etc.)
+-kipi-plugins			# ~8 megs + drags in Marble
+#-kdeplasma-addons		# ~16 megs
+#-krusader			# ~4 megs
+
+# Additional packages that are not default in kde-desktop but useful
+k3b				# ~15 megs
+-calligra			# don't include whole calligra, just parts of it
+calligra-words
+calligra-sheets			# ~1 megs
+calligra-stage			# ~3 megs
+#kdeartwork			# only include some parts of kdeartwork
+#twinkle			# (~10 megs)
+fuse
+liveusb-creator
+
+# only include kdegames-minimal
+-kdegames
+kdegames-minimal
+
+### space issues
+
+# fonts (we make no bones about admitting we're english-only)
+wqy-microhei-fonts			# a compact CJK font, to replace:
+-nhn-nanum-gothic-fonts			# Korean (old name, still in comps)
+-naver-nanum-gothic-fonts		# Korean
+-vlgothic-fonts				# Japanese
+-adobe-source-han-sans-cn-fonts		# simplified Chinese
+-adobe-source-han-sans-twhk-fonts	# traditional Chinese
+
+-paratype-pt-sans-fonts	# Cyrillic (already supported by DejaVu), huge
+#-stix-fonts		# mathematical symbols
+
+# remove input methods to free space
+-@input-methods
+-scim*
+-m17n*
+-ibus*
+-iok
+
+# save some space (from @standard)
+-make
+
+# admin-tools
+-gnome-disk-utility
+# kcm_clock still lacks some features, so keep system-config-date around
+#-system-config-date
+# prefer kcm_systemd
+-system-config-services
+# prefer/use kusers
+-system-config-users
+
+## avoid serious bugs by omitting broken stuff
+
+%end
+
+%post
+%end

fedora-livecd-mate_compiz.ks

@@ -0,0 +1,93 @@
+# Desktop with customizations to fit in a CD (package removals, etc.)
+# Maintained by the Fedora Desktop SIG:
+# http://fedoraproject.org/wiki/SIGs/Desktop
+# mailto:desktop@lists.fedoraproject.org
+
+%include fedora-live-mate_compiz.ks
+%include fedora-live-minimization.ks
+
+%packages
+# First, no office
+-planner
+
+# Drop things for size
+-@3d-printing
+-brasero
+-bluez
+-bluez-cups
+-@dial-up
+-dnf
+-gnome-bluetooth-libs
+-gnome-icon-theme-symbolic
+-gnome-software
+-gnome-user-docs
+-@guest-desktop-agents
+-@libreoffice
+-@mate-applications
+-mate-icon-theme-faenza
+-transmission-gtk
+
+# Drop oversized fonts that aren't needed
+-cjkuni-uming-fonts
+-wqy-zenhei-fonts
+
+# Drop the Java plugin
+-icedtea-web
+-java-1.8.0-openjdk
+
+# Drop things that pull in perl
+-linux-atm
+
+# No printing
+-foomatic-db-ppds
+-foomatic
+
+# Dictionaries are big
+# we're going to try keeping hunspell-* after notting, davidz, and ajax voiced
+# strong preference to giving it a go on #fedora-desktop.
+# also see http://bugzilla.gnome.org/681084
+-aspell-*
+-man-pages*
+-words
+
+# Help and art can be big, too
+-gnome-user-docs
+-evolution-help
+-desktop-backgrounds-basic
+-*backgrounds-extras
+
+# Legacy cmdline things we don't want
+-krb5-auth-dialog
+-krb5-workstation
+-pam_krb5
+-quota
+-nano
+-minicom
+-dos2unix
+-finger
+-ftp
+-jwhois
+-mtr
+-pinfo
+-rsh
+-nfs-utils
+-ypbind
+-yp-tools
+-rpcbind
+-acpid
+-ntsysv
+
+# Drop some system-config things
+-system-config-language
+-system-config-printer
+-system-config-rootpassword
+-system-config-services
+-policycoreutils-gui
+
+%end
+
+%post
+# This is a huge file and things work ok without it
+rm -f /usr/share/icons/HighContrast/icon-theme.cache
+
+%end

fedora-livecd-security.ks

@@ -75,6 +75,7 @@ gnome-keyring-pam
 -packETH
 -pads
 -pdfcrack
+-picviz-gui
 -proxychains
 -pyrit
 -raddump
@@ -87,7 +88,9 @@ gnome-keyring-pam
 -tcpreplay
 -tripwire
 -wipe
--zmap
+
+# Is not available for OpenVAS-7. No longer supported by upstream.
+-openvas-client 
 
 %end
 

fedora-livecd-soas.ks

@@ -76,19 +76,13 @@ sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.con
 sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
 
 # Don't use the default system user (in SoaS liveuser) as nick name
+gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t string /desktop/sugar/user/default_nick disabled >/dev/null
+
 # Disable the logout menu item in Sugar
+gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /desktop/sugar/show_logout false >/dev/null
+
 # Enable Sugar power management
-cat >/usr/share/glib-2.0/schemas/sugar.soas.gschema.override <<EOF
-[org.sugarlabs.user]
-default-nick='disabled'
-
-[org.sugarlabs]
-show-logout=false
-
-[org.sugarlabs.power]
-automatic=true
-EOF
-/usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/sugar.soas.gschema.override
+gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /desktop/sugar/power/automatic True >/dev/null
 
 cat >> /etc/rc.d/init.d/livesys << EOF
 # set up lightdm autologin

fedora-livedvd-electronic_lab.ks

@@ -0,0 +1,59 @@
+# Description : Live DVD image for Fedora/Free Electronic Lab
+#
+# Maintainer(s):
+# - Chitlesh Goorah <chitlesh a fedoraproject.org>
+# - Thibault North  <tnorth   a fedoraproject.org>
+
+%include fedora-livecd-desktop.ks
+
+# DVD payload
+part / --size 10240
+
+%packages
+
+@electronic-lab
+
+# Support for the Milkymist hardware community
+@milkymist
+
+
+# Office
+dia
+vym
+libreoffice-writer
+libreoffice-calc
+libreoffice-impress
+#libreoffice-extendedPDF
+planner
+graphviz
+
+
+# debugging tools
+make
+gdb
+valgrind
+kdbg
+wireshark-gnome
+qemu
+
+
+# EDA/CAD department
+perl-Test-Pod
+perl-Test-Pod-Coverage
+
+
+# Removing unnecessary packages from the desktop spin
+-abiword
+-@games
+-gimp
+-gimp-libs
+-gimp-data-extras
+-kdebluetooth
+-kbluetooth
+-rdesktop
+
+%end
+
+%post
+
+%end

fedora-livedvd-games.ks

@@ -4,7 +4,7 @@
 # - Bruno Wolff III <bruno@wolff.to>
 # - Formerly maintained by Rahul Sundaram
 
-%include fedora-live-xfce.ks
+%include fedora-livecd-xfce.ks
 
 # The recommended part size for DVDs is too close to use for the games spin
 part / --size 10240
@@ -53,7 +53,7 @@ maniadrive-music
 megaglest
 nethack-vultures
 netpanzer
-#neverball #cut for size
+neverball
 nogravity
 pinball
 scorched3d
@@ -171,6 +171,7 @@ celestia
 childsplay
 gcompris
 planets
+stellarium
 tuxpaint
 tuxpaint-stamps
 tuxtype2

fedora-livedvd-scientific_kde.ks

@@ -48,26 +48,21 @@ ddd
 valgrind
 
 #python 2 tools/libraries not included from the groups
-python-tools
 python-ipython
 python-ipython-console
 python-ipython-notebook
 sympy
 python-networkx
-python-pandas
 
 #python 3 and tools/libraries not included from the groups
 python3
-python3-tools
 python3-matplotlib
 python3-scipy
 python3-numpy
 python3-ipython
 python3-ipython-console
 python3-ipython-notebook
-python3-sympy
 python3-networkx
-python3-pandas
 
 # matplotlib backends
 python-matplotlib-qt4

fedora-mate-packages.ks

@@ -1,4 +1,8 @@
 %packages
+-realmd                     # only seems to be used in GNOME
+-PackageKit*                # we switched to yumex, so we don't need this
+-ConsoleKit                 # ConsoleKit is deprecated
+-ConsoleKit-x11             # ConsoleKit is deprecated
 firefox
 @mate
 compiz
@@ -15,42 +19,13 @@ emerald-themes
 emerald
 fusion-icon
 fusion-icon-gtk
-@networkmanager-submodules
-blueman
-
-# some apps from mate-applications
-caja-actions
-mate-disk-usage-analyzer
-mate-netspeed
-
-# more backgrounds
-f22-backgrounds-mate
-f21-backgrounds-extras-base
-f21-backgrounds-extras-mate
-
-# system tools
-system-config-printer
-system-config-printer-applet
-
-# audio video
-parole
-exaile
-PackageKit-gstreamer-plugin
-
-# office
 @libreoffice
-
-# dsl tools
-rp-pppoe
-
-# drop packages
--PackageKit*                # we switched to yumex, so we don't need this
-
-# blacklist applications which breaks mate-desktop
--audacious
+@networkmanager-submodules
 
 # FIXME; apparently the glibc maintainers dislike this, but it got put into the
 # desktop image at some point.  We won't touch this one for now.
 nss-mdns
 
+# This one needs to be kicked out of @standard
+-smartmontools
 %end

fedora-repo-not-rawhide.ks

@@ -1,3 +1,3 @@
-repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=fedora-$releasever&arch=$basearch
-repo --name=updates --mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=updates-released-f$releasever&arch=$basearch
-#repo --name=updates-testing --mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=updates-testing-f$releasever&arch=$basearch
+repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch
+repo --name=updates --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=updates-released-f$releasever&arch=$basearch
+#repo --name=updates-testing --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=updates-testing-f$releasever&arch=$basearch

fedora-repo-rawhide.ks

@@ -1 +1 @@
-repo --name=rawhide --mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=rawhide&arch=$basearch
+repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch

fedora-repo.ks

@@ -3,7 +3,7 @@
 # Exactly one of the following should be uncommented
 
 # For the master branch the following should be uncommented
-# %include fedora-repo-rawhide.ks
+#%include fedora-repo-rawhide.ks
 
 # For non-master branches the following should be uncommented
 %include fedora-repo-not-rawhide.ks

fedora-soas-packages.ks

@@ -8,6 +8,7 @@
 # - Sebastian Dziallas <sdz AT fedoraproject DOT org>
 # - Mel Chua <mchua AT fedoraproject DOT org>
 
+
 %packages
 -@fonts
 -@dial-up
@@ -33,14 +34,6 @@
 -ibus*
 -hyperv-daemons
 
-# Add some extra fonts
-dejavu-sans-fonts
-dejavu-sans-mono-fonts
-madan-fonts
-aajohan-comfortaa-fonts
-sil-abyssinica-fonts
-vlgothic-fonts
-
 # == Core Sugar Platform ==
 @sugar-desktop
 -sugar-ruler

fedora-virt-server.ks.in

@@ -0,0 +1,72 @@
+# Kickstart file to create a small "base" Fedora image install suitable
+# for use as e.g. an application server.
+# 
+# Maintainer: fedora-cloud-list@fedoraproject.org
+#
+# REQUIRED variables:
+#   @@PUBLIC_KEY@@ - ssh public key
+# 
+# You must search for all required variables and replace them.
+# Example usage:
+# sed -e s,@@PUBLIC_KEY@@,"$(cat ~/.ssh/authorized_keys)", fedora-virt-server.ks.in > my-fedora-server.ks
+
+lang C
+keyboard us
+timezone --utc GMT/Zulu
+auth --useshadow --enablemd5
+firewall --service=ssh
+bootloader --timeout=1 --append="acpi=force"
+network --bootproto=dhcp --device=eth0 --onboot=on
+services --enabled=network
+
+## IMPORTANT ##
+## EDIT HERE ##
+# ROOT PASSWORD:
+# Setting a root password is NOT RECOMMENDED, especially if your
+# server will be accessible to the public internet.  This is
+# because of the rise of automated ssh password guessing attacks.
+# You should instead (if you don't have one already)
+# generate a public ssh key:
+# http://sial.org/howto/openssh/publickey-auth/
+# 
+# See comment below in %post for authorizing your public
+# key for the root account.
+
+rootpw ""
+
+# However, if you choose instead to make a password,
+# you will need to replace the above line with one like
+# rootpw --iscrypted @@ROOT_PASSWORD_CRYPTED@@
+# If you do neither of these things, you will not be able to log
+# into your machine.
+
+clearpart --all --initlabel
+part / --size=550 --grow --fstype=ext4
+# You may change this if you don't want swap
+part swap --recommended
+
+%packages
+@standard
+%end
+
+#
+# Add custom post scripts after the base post.
+#
+%post
+
+## EDIT HERE ##
+cd /root
+if ! test -d .ssh; then
+  mkdir --mode=700 .ssh
+fi
+cat >> .ssh/authorized_keys << END_AUTHORIZED_KEYS
+@@PUBLIC_KEY@@
+END_AUTHORIZED_KEYS
+chmod 600 .ssh/authorized_keys
+if -x /usr/sbin/selinuxenabled && /usr/sbin/selinuxenabled; then
+  chcon -R -h -t home_ssh_t .ssh
+fi
+
+%end
+
+reboot

fedora-workstation-packages.ks

@@ -9,7 +9,6 @@
 # workstation-product-environment in comps
 @base-x
 @core
-@firefox
 @fonts
 @guest-desktop-agents
 @hardware-support
@@ -19,9 +18,6 @@
 @printing
 @workstation-product
 
-# Branding for the installer
-fedora-productimg-workstation
-
 # Exclude unwanted packages from @anaconda-tools group
 -gfs2-utils
 -reiserfs-utils

fedora-xfce-packages.ks

@@ -21,11 +21,6 @@
 
 # unlock default keyring. FIXME: Should probably be done in comps
 gnome-keyring-pam
-# Add some screensavers, people seem to like them
-# Note that blank is still default.
-xscreensaver-extras
-wget
-system-config-printer
 
 # save some space
 -autofs
@@ -35,6 +30,32 @@ system-config-printer
 -realmd                     # only seems to be used in GNOME
 -PackageKit*                # we switched to yumex, so we don't need this
 -aspell-*                   # dictionaries are big
+-gnumeric
+-foomatic-db-ppds
+-foomatic
+-gutenprint
+-stix-fonts
+-ibus-typing-booster
 -xfce4-sensors-plugin
+#-man-pages-*
+-adobe-source-han-* # save 94MB
+-rodent-icon-theme  # save 34MB
+-skkdic             # save 25MB
+-naver-nanum-gothic-fonts # save 14MB
+-ibus-kkc
+-ibus-libpinyin
+-libpinyin-data
+-libkkc-data
+# Drop some fonts for space
+-vlgothic-fonts
+-paratype-pt-sans-fonts
+-jomolhari-fonts
+-sil-abyssinca-fonts
+
+# drop some system-config things
+-system-config-network
+-system-config-rootpassword
+#-system-config-services
+-policycoreutils-gui
 
 %end

l10n/fedora-livecd-desktop-de_CH.ks

@@ -1,9 +1,9 @@
-# fedora-live-workstation-de_CH.ks
+# fedora-livecd-desktop-de_CH.ks
 #
 # Maintainer(s):
 # - Fabian Affolter <fab at fedoraproject.org>
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 lang de_DE.UTF-8
 keyboard sg-latin1-nodeadkeys

l10n/fedora-livecd-desktop-de_DE.ks

@@ -1,9 +1,9 @@
-# fedora-live-workstation-de_DE.ks
+# fedora-livecd-desktop-de_DE.ks
 #
 # Maintainer(s):
 # - Jeroen van Meeuwen <kanarip a fedoraunity.org>
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 lang de_DE.UTF-8
 keyboard de-latin1-nodeadkeys

l10n/fedora-livecd-desktop-fr_FR.ks

@@ -1,4 +1,4 @@
-# fedora-live-workstation-fr_FR.ks
+# fedora-livecd-desktop-fr_FR.ks
 #
 # Description:
 # - French Fedora Live Spin with the Gnome Desktop Environment
@@ -6,7 +6,7 @@
 # Maintainer(s):
 # - Matthieu Saulnier <fantom@fedoraproject.org>
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 lang fr_FR.UTF-8
 keyboard fr-latin9

l10n/fedora-livecd-desktop-nl_NL.ks

@@ -1,9 +1,9 @@
-# fedora-live-workstation-nl_NL.ks
+# fedora-livecd-desktop-nl_NL.ks
 #
 # Maintainer(s):
 # - Jeroen van Meeuwen <kanarip a fedoraunity.org>
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 lang nl_NL.UTF-8
 keyboard us

l10n/fedora-livecd-desktop-pt_BR.ks

@@ -1,9 +1,9 @@
-# fedora-live-workstation-pt_BR.ks
+# fedora-livecd-desktop-pt_BR.ks
 #
 # Maintainer(s):
 # - Igor Pires Soares <igor at projetofedora.org>
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 lang pt_BR.UTF-8
 keyboard br-abnt2

l10n/fedora-livecd-desktop-pt_PT.ks

@@ -1,9 +1,9 @@
-# fedora-live-workstation-pt_PT.ks
+# fedora-livecd-desktop-pt_PT.ks
 #
 # Maintainer(s):
 # - Pedro Silva <pedrofsilva a netcabo.pt>
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 lang pt_PT.UTF-8
 keyboard pt-latin1

l10n/fedora-livecd-desktop-ru_RU.ks

@@ -1,9 +1,9 @@
-# fedora-live-workstation-ru_RU.ks
+# fedora-livecd-desktop-ru_RU.ks
 #
 # Maintainer(s):
 # Sergey Mihailov <sergey.mihailov at gmail.com>
 
-%include ../fedora-live-workstation.ks
+%include ../fedora-livecd-desktop.ks
 
 lang ru_RU.UTF-8
 keyboard ru