atomic-vagrant: Mask cloud-init instead of using rm on /etc

Now that cloud-init is enabled in the systemd unit, that change
goes in /usr/lib...which we can't easily change.  There are
two potentially sane solutions:
 - Refactor the kickstarts here
 - Some support for systemd presets in kickstart files would
   allow us to have a later override here

atomic-installer/lorax-configure-repo.tmpl

@@ -1,8 +0,0 @@
-## Lorax template to configure Anaconda to use the local OSTree
-## repository on disk.
-
-<%page args="ostree_osname, ostree_ref"/>
-append usr/share/anaconda/interactive-defaults.ks "ostreesetup --nogpg --osname=${ostree_osname} --remote=${ostree_osname} --url=file:////run/install/repo/content/repo --ref=${ostree_ref}\n"
-append usr/share/anaconda/interactive-defaults.ks "services --disabled cloud-init,cloud-config,cloud-final,cloud-init-local\n"
-append usr/share/anaconda/interactive-defaults.ks "%post --erroronfail\nrm -f /etc/ostree/remotes.d/${ostree_osname}.conf\n%end\n"
-

atomic-installer/lorax-embed-repo.tmpl

@@ -1,11 +0,0 @@
-## Lorax template to embed an OSTree repository into the installer.iso
-## and configure an interactive installer use to look for it.
-##
-## Note that we pull with depth=0 to only get *one* commit into the
-## ISO, because we obviously don't want the full history.
-
-<%page args="workdir, ostree_osname, ostree_repo, ostree_ref"/>
-runcmd mkdir -p ${workdir}/iso-graft/content/repo
-runcmd ostree --repo=${workdir}/iso-graft/content/repo init --mode=archive-z2
-runcmd ostree --repo=${workdir}/iso-graft/content/repo remote add ostree-mirror --set=gpg-verify=false ${ostree_repo}
-runcmd ostree --repo=${workdir}/iso-graft/content/repo pull --mirror ostree-mirror ${ostree_ref}

fedora-arm-base.ks

@@ -7,7 +7,7 @@ firewall --enabled --service=mdns,ssh
 # configure extlinux bootloader
 bootloader extlinux
 
-part /boot --size=300 --fstype ext3
+part /boot --size=512 --fstype ext3
 part swap --size=512 --fstype swap
 part / --size=3000 --fstype ext4
 

fedora-arm-minimal.ks

@@ -1,7 +1,7 @@
 %include fedora-arm-base.ks
 
-part swap --size=256 --fstype swap
-part / --size=1200 --fstype ext4
+part swap --size=128 --fstype swap
+part / --size=1400 --fstype ext4
 
 %packages
 -@standard

fedora-arm-server.ks

@@ -1,8 +1,5 @@
 %include fedora-arm-base.ks
 
-# server defaults to xfs for / so lets do so on arm also
-part / --size=3000 --fstype xfs
-
 %packages
 -@fedora-release-nonproduct
 -@dial-up

fedora-arm-xfce.ks

@@ -1,8 +1,7 @@
 %include fedora-arm-base.ks
 %include fedora-arm-xbase.ks
 %include fedora-xfce-packages.ks
-
-part / --size=4000 --fstype ext4
+part / --size=3500 --fstype ext4
 
 %post
 echo -n "Enabling initial-setup gui mode on startup"

fedora-cloud-atomic.ks

@@ -1,10 +1,8 @@
-# Fedora Atomic is a cloud-focused spin implementing the Project
-# Atomic patterns.  Note that this replicates the same tree which can
-# now be installed on bare metal.
-
-# This image allocates most space to an LVM-managed thin pool
-# dedicated for Docker containers, and uses docker-storage-setup to
-# dynamically resize storage on boot.
+# Fedora Atomic is a cloud-focused spin implementing the Project Atomic
+# patterns. 
+#
+# RIGHT NOW, this is very like the traditional cloud image -- this is
+# just a starting point.
 
 text
 lang en_US.UTF-8
@@ -21,8 +19,7 @@ firewall --disabled
 bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
 
 network --bootproto=dhcp --device=link --activate --onboot=on
-services --disabled=network
-services --enabled=sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
+services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
 
 zerombr
 clearpart --all
@@ -33,14 +30,14 @@ volgroup atomicos pv.01
 logvol / --size=3000 --fstype="xfs" --name=root --vgname=atomicos
 
 # Equivalent of %include fedora-repo.ks
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/rawhide/ --ref=fedora-atomic/rawhide/x86_64/docker-host
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/22/ --ref=fedora-atomic/f22/x86_64/docker-host
 
 reboot
 
 %post --erroronfail
 # See https://github.com/projectatomic/rpm-ostree/issues/42
 ostree remote delete fedora-atomic
-ostree remote add --set=gpg-verify=false fedora-atomic 'http://dl.fedoraproject.org/pub/fedora/linux/atomic/rawhide/'
+ostree remote add --set=gpg-verify=false fedora-atomic 'http://dl.fedoraproject.org/pub/fedora/linux/atomic/22/'
 
 # older versions of livecd-tools do not follow "rootpw --lock" line above
 # https://bugzilla.redhat.com/show_bug.cgi?id=964299

fedora-cloud-base-vagrant.ks

@@ -1,57 +0,0 @@
-# Like the Cloud Base image, but tuned for vagrant.  Enable
-# the vagrant user, disable cloud-init.
-
-%include fedora-cloud-base.ks
-
-services --disabled=cloud-init,cloud-init-local,cloud-config,cloud-final
-
-# So, to be clear, this gaping security hole is an integral part of how
-# Vagrant works - These images are _not_ supposed to be run in any public-
-# Internet facing way - They are for use on developer setups, almost always
-# with NAT
-user --name=vagrant --password=vagrant
-
-# Suggestion from @purpleidea that most/many vagrant boxes also set root PW
-# to "vagrant" for ease of use.  Again, see comments above.
-rootpw vagrant
-
-# The addition of the net.ifnames=0 and biosdevnames=0 option ensures that
-# even on VirtualBox virt, we get a primary network device with "eth0" as the name
-# This simplifies things and allows a single disk image for both supported Vagrant
-# platforms (virtualbox and kvm)
-bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0" --extlinux
-
-%packages
-# The default koji Vagrantfile configuration uses rsync to sync files between
-# the vagrant host and the guest.  It uses yum to verify that rsync is present
-# and/or install it if it is not.  It will fail without adding the yum compat
-# layer for dnf
-# TODO: Teach vagrant about dnf
-dnf-yum
-%end
-
-%post --erroronfail
-
-# Work around cloud-init being both disabled and enabled; need
-# to refactor to a common base.
-systemctl mask cloud-init cloud-init-local cloud-config cloud-final
-
-# Vagrant setup
-sed -i 's,Defaults\\s*requiretty,Defaults !requiretty,' /etc/sudoers
-echo 'vagrant ALL=NOPASSWD: ALL' > /etc/sudoers.d/vagrant-nopasswd
-sed -i 's/.*UseDNS.*/UseDNS no/' /etc/ssh/sshd_config
-mkdir -m 0700 -p ~vagrant/.ssh
-cat > ~vagrant/.ssh/authorized_keys << EOKEYS
-ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
-EOKEYS
-chmod 600 ~vagrant/.ssh/authorized_keys
-chown -R vagrant:vagrant ~vagrant/.ssh/
-
-# Further suggestion from @purpleidea (James Shubin) - extend key to root users as well
-mkdir -m 0700 -p /root/.ssh
-cp /home/vagrant/.ssh/authorized_keys /root/.ssh/authorized_keys
-chmod 600 /root/.ssh/authorized_keys
-chown -R root:root /root/.ssh
-
-%end
-

fedora-cloud-base.ks

@@ -7,22 +7,9 @@
 # Note that unlike the standard F20 install, this image has /tmp on disk
 # rather than in tmpfs, since memory is usually at a premium.
 #
-# This kickstart file is designed to be used with ImageFactory (in Koji).
-#
-# To do a local build, you'll need to install ImageFactory.  See
-# http://worknotes.readthedocs.org/en/latest/cloudimages.html for some notes.
-#
-# For a TDL file, I store one here:
-# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
-# (Koji generates one internally...what we really want is Koji to publish it statically)
-# 
-# Once you have imagefactory and imagefactory-plugins installed, run:
-# 
-#   curl -O https://git.fedorahosted.org/cgit/fedora-atomic.git/plain/fedora-atomic-rawhide.tdl 
-#   tempfile=$(mktemp --suffix=.ks)
-#   ksflatten -v F22 fedora-cloud-base.ks > ${tempfile}
-#   imagefactory --debug base_image --file-parameter install_script ${tempfile} fedora-atomic-rawhide.tdl
-#
+# This kickstart file is designed to be used with appliance-creator and
+# may need slight modification for use with actual anaconda or other tools.
+# We intend to target anaconda-in-a-vm style image building for F20.
 
 cmdline
 lang en_US.UTF-8
@@ -155,11 +142,9 @@ NAutoVTs=0' /etc/systemd/logind.conf
 
 echo -n "Network fixes"
 # initscripts don't like this file to be missing.
-# and https://bugzilla.redhat.com/show_bug.cgi?id=1204612
 cat > /etc/sysconfig/network << EOF
 NETWORKING=yes
 NOZEROCONF=yes
-DEVTIMEOUT=10
 EOF
 
 # For cloud images, 'eth0' _is_ the predictable device name, since

fedora-docker-base.ks

@@ -2,18 +2,6 @@
 #
 # To keep this image minimal it only installs English language. You need to change
 # yum configuration in order to enable other languages.
-#
-###  Hacking on this image ###
-# This kickstart is processed using Anaconda-in-ImageFactory (via Koji typically),
-# but you can run imagefactory locally too.
-#
-# To do so, testing local changes, first you'll need a TDL file.  I store one here:
-# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
-# 
-# Then, once you have imagefactory and imagefactory-plugins installed, run:
-# 
-#   imagefactory --debug target_image --template /path/to/fedora-atomic-rawhide.tdl --parameter offline_icicle true --file-parameter install_script $(pwd)/fedora-docker-base.ks docker
-#
 
 cmdline
 bootloader --location=none
@@ -21,6 +9,7 @@ timezone --isUtc --nontp Etc/UTC
 rootpw --plaintext qweqwe
 
 keyboard us
+firewall --disable
 zerombr
 clearpart --all
 part / --size 3000 --fstype ext4
@@ -32,8 +21,7 @@ bash
 fedora-release
 rootfiles
 vim-minimal
-dnf
-dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
+yum
 #fakesystemd #TODO: waiting for review https://bugzilla.redhat.com/show_bug.cgi?id=1118740
 -kernel
 

fedora-install-cloud.ks

@@ -16,12 +16,12 @@
 # use the source repo, we can't just include fedora-repo.ks
 
 # In the master branch the rawhide repo commands should be uncommented.
-repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
-repo --name=rawhide-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
+#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
+#repo --name=rawhide-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
 
 # In non-master branches the fedora repo commands should be uncommented
-#repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
-#repo --name=fedora-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
+repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
+repo --name=fedora-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-workstation,fedora-productimg-server
 
 # Package manifest for the compose.  Uses repo group metadata to translate groups.
 # (default groups for the configured repos are added by --default)

fedora-install-server.ks

@@ -16,12 +16,12 @@
 # use the source repo, we can't just include fedora-repo.ks
 
 # In the master branch the rawhide repo commands should be uncommented.
-repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
-repo --name=rawhide-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
+#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
+#repo --name=rawhide-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
 
 # In non-master branches the fedora repo commands should be uncommented
-#repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
-#repo --name=fedora-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
+repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
+repo --name=fedora-source  --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-workstation
 
 # Package manifest for the compose.  Uses repo group metadata to translate groups.
 # (default groups for the configured repos are added by --default)
@@ -81,7 +81,6 @@ dracut-*
 @headless-management
 @container-management
 @domain-client
-@server-hardware-support
 
 # Common server packages
 @mysql

fedora-install-workstation.ks

@@ -16,12 +16,12 @@
 # use the source repo, we can't just include fedora-repo.ks
 
 # In the master branch the rawhide repo commands should be uncommented.
-repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
-repo --name=rawhide-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
+#repo --name=rawhide --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
+#repo --name=rawhide-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide-source&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
 
 # In non-master branches the fedora repo commands should be uncommented
-#repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
-#repo --name=fedora-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
+repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
+repo --name=fedora-source --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-source-$releasever&arch=$basearch --excludepkgs=fedora-productimg-cloud,fedora-productimg-server
 
 %include fedora-workstation-packages.ks
 

fedora-live-base.ks

@@ -305,9 +305,6 @@ if [ -x /usr/bin/fc-cache ] ; then
    fc-cache -f
 fi
 
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
 %end
 
 

fedora-live-design_suite.ks

@@ -13,11 +13,14 @@
 part / --size 8192
 
 %packages
+
 # graphics
 blender
 LuxRender-blender
 YafaRay-blender
 bluefish 
+#cinepaint
+#cmyktool
 colord-extra-profiles
 darktable
 dia
@@ -107,9 +110,9 @@ chmod a+x /usr/share/applications/list-design-tutorials.desktop
 # Add information about Fedora Design Suite
 cat >> /usr/share/applications/fedora-design-suite.desktop << FOE
 [Desktop Entry]
-Name=Design Suite Info
-GenericName=About Design Suite
-Comment=Wiki page of Design Suite
+Name=About Design Team 
+GenericName=About Design Team 
+Comment=Wiki page of Design Team
 Exec=xdg-open http://fedoraproject.org/wiki/Design_Suite
 Type=Application
 Icon=applications-internet
@@ -120,8 +123,8 @@ chmod a+x /usr/share/applications/fedora-design-suite.desktop
 # Add information about Fedora Design Team
 cat >> /usr/share/applications/fedora-design-team.desktop << FOE
 [Desktop Entry]
-Name=Design Team Info
-GenericName=About Design Team 
+Name=About Design Suite
+GenericName=About Design Suite Wiki Page
 Comment=Wiki page of Design Team
 Exec=xdg-open http://fedoraproject.org/wiki/Design
 Type=Application

fedora-live-jam_kde.ks

@@ -199,12 +199,12 @@ thunderbird
 %post
 
 #setup kickoff favorites
-/bin/mkdir -p /etc/skel/.config
+/bin/mkdir -p /etc/skel/.kde/share/config
 
-JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/pavucontrol.desktop,/usr/share/applications/kde4/kfmclient_html.desktop,/usr/share/applications/kde4/Kontact.desktop,/usr/share/applications/kde4/ktp-contactlist.desktop
+JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/kde4/konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/kde4/systemsettings.desktop
 JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,$JAMFAVORITES
 
-cat <<EOF  >> /etc/skel/.config/kickoffrc
+cat <<EOF  >> /etc/skel/.kde/share/config/kickoffrc
 [Favorites]
 FavoriteURLs=$JAMFAVORITES
 EOF

fedora-live-kde-base.ks

@@ -13,16 +13,16 @@ DESKTOP="KDE"
 DISPLAYMANAGER="KDE"
 EOF
 
-# set default GTK+ theme for root (see #683855, #689070, #808062)
+# make oxygen-gtk the default GTK+ theme for root (see #683855, #689070, #808062)
 cat > /root/.gtkrc-2.0 << EOF
-include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
+include "/usr/share/themes/oxygen-gtk/gtk-2.0/gtkrc"
 include "/etc/gtk-2.0/gtkrc"
-gtk-theme-name="Adwaita"
+gtk-theme-name="oxygen-gtk"
 EOF
 mkdir -p /root/.config/gtk-3.0
 cat > /root/.config/gtk-3.0/settings.ini << EOF
 [Settings]
-gtk-theme-name = Adwaita
+gtk-theme-name = oxygen-gtk
 EOF
 
 # add initscript
@@ -52,10 +52,10 @@ SDDM_EOF
 fi
 
 # add liveinst.desktop to favorites menu
-mkdir -p /home/liveuser/.config/
-cat > /home/liveuser/.config/kickoffrc << MENU_EOF
+mkdir -p /home/liveuser/.kde/share/config/
+cat > /home/liveuser/.kde/share/config/kickoffrc << MENU_EOF
 [Favorites]
-FavoriteURLs=/usr/share/applications/kde4/kfmclient_html.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
+FavoriteURLs=/usr/share/applications/kde4/konqbrowser.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/kde4/systemsettings.desktop,/usr/share/applications/liveinst.desktop
 MENU_EOF
 
 # show liveinst.desktop on desktop and in menu
@@ -107,6 +107,15 @@ cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
 Enabled=false
 KRES_EOF
 
+# Disable nepomuk
+cat > /home/liveuser/.kde/share/config/nepomukserverrc << NEPOMUK_EOF
+[Basic Settings]
+Start Nepomuk=false
+
+[Service-nepomukfileindexer]
+autostart=false
+NEPOMUK_EOF
+
 # make sure to set the right permissions and selinux contexts
 chown -R liveuser:liveuser /home/liveuser/
 restorecon -R /home/liveuser/

fedora-live-mate_compiz.ks

@@ -5,7 +5,7 @@
 %include fedora-live-base.ks
 %include fedora-mate-packages.ks
 
-part / --size 6144 
+part / --size 4096 
 
 %post
 cat >> /etc/rc.d/init.d/livesys << EOF

fedora-livecd-mate_compiz.ks

@@ -12,12 +12,6 @@
 caja-actions
 mate-disk-usage-analyzer
 mate-netspeed
-mate-themes-extras
-
-# more backgrounds
-f22-backgrounds-mate
-f21-backgrounds-extras-base
-f21-backgrounds-extras-mate
 
 # system tools
 system-config-printer
@@ -32,12 +26,17 @@ audacious
 # dsl tools
 rp-pppoe
 
+# First, no office
+#-planner
+
 # Drop things for size
 -@3d-printing
 -brasero
 -bluez
 -bluez-cups
 -colord
+-@dial-up
+-espeak
 -fedora-icon-theme
 -GConf2
 -gnome-bluetooth-libs
@@ -64,9 +63,10 @@ rp-pppoe
 # Help and art can be big, too
 -gnome-user-docs
 -evolution-help
+-desktop-backgrounds-basic
+-*backgrounds-extras
 
 # Legacy cmdline things we don't want
--telnet
 
 %end
 

fedora-livedvd-electronic_lab.ks

@@ -0,0 +1,59 @@
+# Description : Live DVD image for Fedora/Free Electronic Lab
+#
+# Maintainer(s):
+# - Chitlesh Goorah <chitlesh a fedoraproject.org>
+# - Thibault North  <tnorth   a fedoraproject.org>
+
+%include fedora-live-workstation.ks
+
+# DVD payload
+part / --size 10240
+
+%packages
+
+@electronic-lab
+
+# Support for the Milkymist hardware community
+@milkymist
+
+
+# Office
+dia
+vym
+libreoffice-writer
+libreoffice-calc
+libreoffice-impress
+#libreoffice-extendedPDF
+planner
+graphviz
+
+
+# debugging tools
+make
+gdb
+valgrind
+kdbg
+wireshark-gnome
+qemu
+
+
+# EDA/CAD department
+perl-Test-Pod
+perl-Test-Pod-Coverage
+
+
+# Removing unnecessary packages from the desktop spin
+-abiword
+-@games
+-gimp
+-gimp-libs
+-gimp-data-extras
+-kdebluetooth
+-kbluetooth
+-rdesktop
+
+%end
+
+%post
+
+%end

fedora-livedvd-games.ks

@@ -33,7 +33,7 @@ asc
 asc-music
 astromenace
 beneath-a-steel-sky-cd
-boswars
+#boswars # currently not building
 btanks
 bzflag
 crossfire-client

fedora-livedvd-scientific_kde.ks

@@ -171,6 +171,10 @@ hevea
 #Include Mozilla Firefox
 firefox
 
+# Omit KDE 4 translations for now: https://bugzilla.redhat.com/show_bug.cgi?id=1197940
+-kde-l10n-*
+-calligra-l10n-*
+
 %end
 
 %post

fedora-repo.ks

@@ -3,7 +3,7 @@
 # Exactly one of the following should be uncommented
 
 # For the master branch the following should be uncommented
-%include fedora-repo-rawhide.ks
+# %include fedora-repo-rawhide.ks
 
 # For non-master branches the following should be uncommented
-# %include fedora-repo-not-rawhide.ks
+%include fedora-repo-not-rawhide.ks