cinnamon: increase the underlying filesystem to 6.5G since 6G is a tad too small

Signed-off-by: Dennis Gilmore <dennis@ausil.us>

SparkleShare.txt

@@ -1,9 +0,0 @@
-Congratulations, you've successfully created a SparkleShare repository!
-
-Any files you add or change in this folder will be automatically synced to 
-ssh://luya@git.fedorahosted.org/git/spin-kickstarts.git and everyone connected to it.
-
-SparkleShare is an Open Source software program that helps people collaborate and 
-share files. If you like what we do, consider buying us a beer: http://www.sparkleshare.org/
-
-Have fun! :)

atomic-installer/lorax-configure-repo.tmpl

@@ -0,0 +1,8 @@
+## Lorax template to configure Anaconda to use the local OSTree
+## repository on disk.
+
+<%page args="ostree_osname, ostree_ref"/>
+append usr/share/anaconda/interactive-defaults.ks "ostreesetup --nogpg --osname=${ostree_osname} --remote=${ostree_osname} --url=file:////run/install/repo/content/repo --ref=${ostree_ref}\n"
+append usr/share/anaconda/interactive-defaults.ks "services --disabled cloud-init,cloud-config,cloud-final,cloud-init-local\n"
+append usr/share/anaconda/interactive-defaults.ks "%post --erroronfail\nrm -f /etc/ostree/remotes.d/${ostree_osname}.conf\nostree remote add --set=gpg-verify=false fedora-atomic 'http://dl.fedoraproject.org/pub/fedora/linux/atomic/22/'\n%end\n"
+

atomic-installer/lorax-embed-repo.tmpl

@@ -0,0 +1,11 @@
+## Lorax template to embed an OSTree repository into the installer.iso
+## and configure an interactive installer use to look for it.
+##
+## Note that we pull with depth=0 to only get *one* commit into the
+## ISO, because we obviously don't want the full history.
+
+<%page args="workdir, ostree_osname, ostree_repo, ostree_ref"/>
+runcmd mkdir -p ${workdir}/iso-graft/content/repo
+runcmd ostree --repo=${workdir}/iso-graft/content/repo init --mode=archive-z2
+runcmd ostree --repo=${workdir}/iso-graft/content/repo remote add ostree-mirror --set=gpg-verify=false ${ostree_repo}
+runcmd ostree --repo=${workdir}/iso-graft/content/repo pull --mirror ostree-mirror ${ostree_ref}

fedora-arm-base.ks

@@ -7,7 +7,7 @@ firewall --enabled --service=mdns,ssh
 # configure extlinux bootloader
 bootloader extlinux
 
-part /boot --size=512 --fstype ext3
+part /boot --size=300 --fstype ext3
 part swap --size=512 --fstype swap
 part / --size=3000 --fstype ext4
 
@@ -23,7 +23,6 @@ services --enabled=ssh,NetworkManager,avahi-daemon,rsyslog,chronyd --disabled=ne
 @standard
 @hardware-support
 @dial-up
-@fedora-release-nonproduct
 
 kernel
 

fedora-arm-minimal.ks

@@ -1,7 +1,7 @@
 %include fedora-arm-base.ks
 
-part swap --size=128 --fstype swap
-part / --size=1400 --fstype ext4
+part swap --size=256 --fstype swap
+part / --size=1200 --fstype ext4
 
 %packages
 -@standard

fedora-arm-server.ks

@@ -1,7 +1,9 @@
 %include fedora-arm-base.ks
 
+# server defaults to xfs for / so lets do so on arm also
+part / --size=3000 --fstype xfs
+
 %packages
--@fedora-release-nonproduct
 -@dial-up
 # install the default groups for the server evironment since installing the environment is not working
 @server-product

fedora-arm-xfce.ks

@@ -2,6 +2,8 @@
 %include fedora-arm-xbase.ks
 %include fedora-xfce-packages.ks
 
+part / --size=4000 --fstype ext4
+
 %post
 echo -n "Enabling initial-setup gui mode on startup"
 ln -s /usr/lib/systemd/system/initial-setup-graphical.service /etc/systemd/system/graphical.target.wants/initial-setup-graphical.service

fedora-cinnamon-packages.ks

@@ -0,0 +1,33 @@
+# fedora-cinnamon-packages.ks
+#
+# Description:
+# - Fedora package set for the Cinnamon Desktop Environment
+#
+# Maintainer(s):
+# - Dan Book <grinnz@grinnz.com>
+
+%packages
+
+@networkmanager-submodules
+@cinnamon-desktop
+@libreoffice
+
+# internet and multimedia
+pidgin
+hexchat
+transmission
+totem
+
+# unlock default keyring. FIXME: Should probably be done in comps
+gnome-keyring-pam
+
+# save some space
+-fedora-icon-theme
+-PackageKit*                # we switched to yumex, so we don't need this
+
+# no bluetooth support
+-bluez
+-bluez-cups
+-NetworkManager-bluetooth
+
+

fedora-cloud-atomic-vagrant.ks

@@ -6,12 +6,13 @@
 services --disabled=cloud-init,cloud-init-local,cloud-config,cloud-final
 
 user --name=vagrant --password=vagrant
+rootpw vagrant
 
 %post --erroronfail
 
 # Work around cloud-init being both disabled and enabled; need
 # to refactor to a common base.
-rm /etc/systemd/system/multi-user.target.wants/cloud-init* /etc/systemd/system/multi-user.target.wants/cloud-config*
+systemctl mask cloud-init cloud-init-local cloud-config cloud-final
 
 # Vagrant setup
 sed -i 's,Defaults\\s*requiretty,Defaults !requiretty,' /etc/sudoers

fedora-cloud-atomic.ks

@@ -1,8 +1,10 @@
-# Fedora Atomic is a cloud-focused spin implementing the Project Atomic
-# patterns. 
-#
-# RIGHT NOW, this is very like the traditional cloud image -- this is
-# just a starting point.
+# Fedora Atomic is a cloud-focused spin implementing the Project
+# Atomic patterns.  Note that this replicates the same tree which can
+# now be installed on bare metal.
+
+# This image allocates most space to an LVM-managed thin pool
+# dedicated for Docker containers, and uses docker-storage-setup to
+# dynamically resize storage on boot.
 
 text
 lang en_US.UTF-8
@@ -19,7 +21,8 @@ firewall --disabled
 bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
 
 network --bootproto=dhcp --device=link --activate --onboot=on
-services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
+services --disabled=network
+services --enabled=sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
 
 zerombr
 clearpart --all

fedora-cloud-base-vagrant.ks

@@ -0,0 +1,61 @@
+# Like the Cloud Base image, but tuned for vagrant.  Enable
+# the vagrant user, disable cloud-init.
+
+%include fedora-cloud-base.ks
+
+services --disabled=cloud-init,cloud-init-local,cloud-config,cloud-final
+
+# So, to be clear, this gaping security hole is an integral part of how
+# Vagrant works - These images are _not_ supposed to be run in any public-
+# Internet facing way - They are for use on developer setups, almost always
+# with NAT
+user --name=vagrant --password=vagrant
+
+# Suggestion from @purpleidea that most/many vagrant boxes also set root PW
+# to "vagrant" for ease of use.  Again, see comments above.
+rootpw vagrant
+
+# The addition of the net.ifnames=0 and biosdevnames=0 option ensures that
+# even on VirtualBox virt, we get a primary network device with "eth0" as the name
+# This simplifies things and allows a single disk image for both supported Vagrant
+# platforms (virtualbox and kvm)
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0" --extlinux
+
+%packages
+# The default koji Vagrantfile configuration uses rsync to sync files between
+# the vagrant host and the guest.  It uses yum to verify that rsync is present
+# and/or install it if it is not.  It will fail without adding the yum compat
+# layer for dnf
+# TODO: Teach vagrant about dnf
+dnf-yum
+# rsync gets installed when the Vagrant box is first launched on the
+# users setup. This can actually take a bit of time.  Just fold it
+# in to the base box disk image
+rsync
+%end
+
+%post --erroronfail
+
+# Work around cloud-init being both disabled and enabled; need
+# to refactor to a common base.
+systemctl mask cloud-init cloud-init-local cloud-config cloud-final
+
+# Vagrant setup
+sed -i 's,Defaults\\s*requiretty,Defaults !requiretty,' /etc/sudoers
+echo 'vagrant ALL=NOPASSWD: ALL' > /etc/sudoers.d/vagrant-nopasswd
+sed -i 's/.*UseDNS.*/UseDNS no/' /etc/ssh/sshd_config
+mkdir -m 0700 -p ~vagrant/.ssh
+cat > ~vagrant/.ssh/authorized_keys << EOKEYS
+ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
+EOKEYS
+chmod 600 ~vagrant/.ssh/authorized_keys
+chown -R vagrant:vagrant ~vagrant/.ssh/
+
+# Further suggestion from @purpleidea (James Shubin) - extend key to root users as well
+mkdir -m 0700 -p /root/.ssh
+cp /home/vagrant/.ssh/authorized_keys /root/.ssh/authorized_keys
+chmod 600 /root/.ssh/authorized_keys
+chown -R root:root /root/.ssh
+
+%end
+

fedora-cloud-base.ks

@@ -7,9 +7,22 @@
 # Note that unlike the standard F20 install, this image has /tmp on disk
 # rather than in tmpfs, since memory is usually at a premium.
 #
-# This kickstart file is designed to be used with appliance-creator and
-# may need slight modification for use with actual anaconda or other tools.
-# We intend to target anaconda-in-a-vm style image building for F20.
+# This kickstart file is designed to be used with ImageFactory (in Koji).
+#
+# To do a local build, you'll need to install ImageFactory.  See
+# http://worknotes.readthedocs.org/en/latest/cloudimages.html for some notes.
+#
+# For a TDL file, I store one here:
+# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
+# (Koji generates one internally...what we really want is Koji to publish it statically)
+# 
+# Once you have imagefactory and imagefactory-plugins installed, run:
+# 
+#   curl -O https://git.fedorahosted.org/cgit/fedora-atomic.git/plain/fedora-atomic-rawhide.tdl 
+#   tempfile=$(mktemp --suffix=.ks)
+#   ksflatten -v F22 -c fedora-cloud-base.ks > ${tempfile}
+#   imagefactory --debug base_image --file-parameter install_script ${tempfile} fedora-atomic-rawhide.tdl
+#
 
 cmdline
 lang en_US.UTF-8
@@ -30,7 +43,7 @@ services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config
 
 zerombr
 clearpart --all
-part / --size 3000 --fstype ext4
+part / --size 3000 --fstype ext4 --grow
 
 %include fedora-repo.ks
 
@@ -142,9 +155,11 @@ NAutoVTs=0' /etc/systemd/logind.conf
 
 echo -n "Network fixes"
 # initscripts don't like this file to be missing.
+# and https://bugzilla.redhat.com/show_bug.cgi?id=1204612
 cat > /etc/sysconfig/network << EOF
 NETWORKING=yes
 NOZEROCONF=yes
+DEVTIMEOUT=10
 EOF
 
 # For cloud images, 'eth0' _is_ the predictable device name, since

fedora-docker-base.ks

@@ -2,14 +2,26 @@
 #
 # To keep this image minimal it only installs English language. You need to change
 # yum configuration in order to enable other languages.
+#
+###  Hacking on this image ###
+# This kickstart is processed using Anaconda-in-ImageFactory (via Koji typically),
+# but you can run imagefactory locally too.
+#
+# To do so, testing local changes, first you'll need a TDL file.  I store one here:
+# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
+# 
+# Then, once you have imagefactory and imagefactory-plugins installed, run:
+# 
+#   imagefactory --debug target_image --template /path/to/fedora-atomic-rawhide.tdl --parameter offline_icicle true --file-parameter install_script $(pwd)/fedora-docker-base.ks docker
+#
 
 cmdline
-bootloader --location=none
+bootloader --disabled
 timezone --isUtc --nontp Etc/UTC
-rootpw --plaintext qweqwe
+rootpw --lock --iscrypted locked
+user --name=none
 
 keyboard us
-firewall --disable
 zerombr
 clearpart --all
 part / --size 3000 --fstype ext4
@@ -21,7 +33,8 @@ bash
 fedora-release
 rootfiles
 vim-minimal
-yum
+dnf
+dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
 #fakesystemd #TODO: waiting for review https://bugzilla.redhat.com/show_bug.cgi?id=1118740
 -kernel
 
@@ -32,6 +45,9 @@ yum
 # Set the language rpm nodocs transaction flag persistently in the
 # image yum.conf and rpm macros
 
+# remove the user anaconda forces us to make
+userdel -r none
+
 LANG="en_US"
 echo "%_install_lang $LANG" > /etc/rpm/macros.image-language-conf
 
@@ -60,6 +76,5 @@ sed -i 's/OOMScoreAdjust=-900//' /etc/systemd/system/dbus.service
 systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service
 
 rm -f /etc/machine-id
-rm -f /etc/fstab
 
 %end

fedora-install-server.ks

@@ -81,6 +81,7 @@ dracut-*
 @headless-management
 @container-management
 @domain-client
+@server-hardware-support
 
 # Common server packages
 @mysql

fedora-live-base.ks

@@ -24,7 +24,6 @@ services --enabled=NetworkManager --disabled=network,sshd
 @guest-desktop-agents
 @standard
 @core
-@fedora-release-nonproduct
 @fonts
 @input-methods
 @dial-up
@@ -305,6 +304,9 @@ if [ -x /usr/bin/fc-cache ] ; then
    fc-cache -f
 fi
 
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
 %end
 
 

fedora-live-cinnamon.ks

@@ -0,0 +1,56 @@
+# fedora-live-cinnamon.ks
+#
+# Description:
+# - Fedora Live Spin with the Cinnamon Desktop Environment
+#
+# Maintainer(s):
+# - Dan Book <grinnz@grinnz.com>
+
+%include fedora-live-base.ks
+%include fedora-live-minimization.ks
+%include fedora-cinnamon-packages.ks
+
+# DVD payload
+part / --size=6656
+
+%post
+# cinnamon configuration
+
+# create /etc/sysconfig/desktop (needed for installation)
+
+cat > /etc/sysconfig/desktop <<EOF
+PREFERRED=/usr/bin/cinnamon-session
+DISPLAYMANAGER=/usr/sbin/lightdm
+EOF
+
+# exclude GNOME-specific menu items
+desktop-file-edit --set-key=NoDisplay --set-value=true /usr/share/applications/fedora-release-notes.webapp.desktop
+desktop-file-edit --set-key=NoDisplay --set-value=true /usr/share/applications/yelp.desktop
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Cinnamon as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
+
+# and mark it as executable
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# this goes at the end after all other changes. 
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
+
+%end
+
+

fedora-live-design_suite.ks

@@ -13,14 +13,11 @@
 part / --size 8192
 
 %packages
-
 # graphics
 blender
 LuxRender-blender
 YafaRay-blender
 bluefish 
-#cinepaint
-#cmyktool
 colord-extra-profiles
 darktable
 dia
@@ -110,9 +107,9 @@ chmod a+x /usr/share/applications/list-design-tutorials.desktop
 # Add information about Fedora Design Suite
 cat >> /usr/share/applications/fedora-design-suite.desktop << FOE
 [Desktop Entry]
-Name=About Design Team 
-GenericName=About Design Team 
-Comment=Wiki page of Design Team
+Name=Design Suite Info
+GenericName=About Design Suite
+Comment=Wiki page of Design Suite
 Exec=xdg-open http://fedoraproject.org/wiki/Design_Suite
 Type=Application
 Icon=applications-internet
@@ -123,8 +120,8 @@ chmod a+x /usr/share/applications/fedora-design-suite.desktop
 # Add information about Fedora Design Team
 cat >> /usr/share/applications/fedora-design-team.desktop << FOE
 [Desktop Entry]
-Name=About Design Suite
-GenericName=About Design Suite Wiki Page
+Name=Design Team Info
+GenericName=About Design Team 
 Comment=Wiki page of Design Team
 Exec=xdg-open http://fedoraproject.org/wiki/Design
 Type=Application

fedora-live-games.ks

@@ -33,7 +33,7 @@ asc
 asc-music
 astromenace
 beneath-a-steel-sky-cd
-#boswars # currently not building
+boswars
 btanks
 bzflag
 crossfire-client

fedora-live-jam_kde.ks

@@ -199,12 +199,12 @@ thunderbird
 %post
 
 #setup kickoff favorites
-/bin/mkdir -p /etc/skel/.kde/share/config
+/bin/mkdir -p /etc/skel/.config
 
-JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/kde4/konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/kde4/systemsettings.desktop
+JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/pavucontrol.desktop,/usr/share/applications/kde4/kfmclient_html.desktop,/usr/share/applications/kde4/Kontact.desktop,/usr/share/applications/kde4/ktp-contactlist.desktop
 JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,$JAMFAVORITES
 
-cat <<EOF  >> /etc/skel/.kde/share/config/kickoffrc
+cat <<EOF  >> /etc/skel/.config/kickoffrc
 [Favorites]
 FavoriteURLs=$JAMFAVORITES
 EOF

fedora-live-kde-base.ks

@@ -13,16 +13,16 @@ DESKTOP="KDE"
 DISPLAYMANAGER="KDE"
 EOF
 
-# make oxygen-gtk the default GTK+ theme for root (see #683855, #689070, #808062)
+# set default GTK+ theme for root (see #683855, #689070, #808062)
 cat > /root/.gtkrc-2.0 << EOF
-include "/usr/share/themes/oxygen-gtk/gtk-2.0/gtkrc"
+include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
 include "/etc/gtk-2.0/gtkrc"
-gtk-theme-name="oxygen-gtk"
+gtk-theme-name="Adwaita"
 EOF
 mkdir -p /root/.config/gtk-3.0
 cat > /root/.config/gtk-3.0/settings.ini << EOF
 [Settings]
-gtk-theme-name = oxygen-gtk
+gtk-theme-name = Adwaita
 EOF
 
 # add initscript
@@ -52,10 +52,10 @@ SDDM_EOF
 fi
 
 # add liveinst.desktop to favorites menu
-mkdir -p /home/liveuser/.kde/share/config/
-cat > /home/liveuser/.kde/share/config/kickoffrc << MENU_EOF
+mkdir -p /home/liveuser/.config/
+cat > /home/liveuser/.config/kickoffrc << MENU_EOF
 [Favorites]
-FavoriteURLs=/usr/share/applications/kde4/konqbrowser.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/kde4/systemsettings.desktop,/usr/share/applications/liveinst.desktop
+FavoriteURLs=/usr/share/applications/kde4/konqbrowser.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
 MENU_EOF
 
 # show liveinst.desktop on desktop and in menu
@@ -80,23 +80,13 @@ cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
 Driver=QSQLITE3
 AKONADI_EOF
 
-# Disable the update notifications of apper 
-cat > /home/liveuser/.kde/share/config/apper << APPER_EOF
-[CheckUpdate]
-autoUpdate=0
-distroUpgrade=0
-interval=0
-APPER_EOF
-
-# Disable some kded modules
-# apperd: http://bugzilla.redhat.com/948099
-cat > /home/liveuser/.kde/share/config/kdedrc << KDEDRC_EOF
-[Module-apperd]
-autoload=false
-KDEDRC_EOF
+# Disable plasma-pk-updates
+sed -i \
+    -e "s|^X-KDE-PluginInfo-EnabledByDefault=true|X-KDE-PluginInfo-EnabledByDefault=false|g" \
+    /usr/share/kservices5/plasma-applet-org.kde.plasma.pkupdates.desktop
 
 # Disable baloo
-cat > /home/liveuser/.kde/share/config/baloofilerc << BALOO_EOF
+cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
 [Basic Settings]
 Indexing-Enabled=false
 BALOO_EOF
@@ -107,24 +97,10 @@ cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
 Enabled=false
 KRES_EOF
 
-# Disable nepomuk
-cat > /home/liveuser/.kde/share/config/nepomukserverrc << NEPOMUK_EOF
-[Basic Settings]
-Start Nepomuk=false
-
-[Service-nepomukfileindexer]
-autostart=false
-NEPOMUK_EOF
-
 # make sure to set the right permissions and selinux contexts
 chown -R liveuser:liveuser /home/liveuser/
 restorecon -R /home/liveuser/
 
-# small hack to enable plasma-netbook workspace on boot
-if strstr "\`cat /proc/cmdline\`" netbook ; then
-   mv /usr/share/autostart/plasma-desktop.desktop /usr/share/autostart/plasma-netbook.desktop
-   sed -i 's/desktop/netbook/g' /usr/share/autostart/plasma-netbook.desktop
-fi
 EOF
 
 %end

fedora-live-kde.ks

@@ -1,8 +1,7 @@
-# fedora-live-kde.ks
+# fedora-livecd-kde.ks
 #
 # Description:
-# - Fedora Live Spin with the K Desktop Environment (KDE), 2 GiB version
-#   see fedora-livecd-kde.ks for the default 1.4 GiB version
+# - Fedora Live Spin with the K Desktop Environment (KDE), default 1.4 GB version
 #
 # Maintainer(s):
 # - Sebastian Vahl <fedora@deadbabylon.de>
@@ -12,33 +11,62 @@
 %include fedora-live-minimization.ks
 
 # DVD payload
-part / --size=8192
+part / --size=4096
 
 
 %packages
-# ship KDE wallpapers instead of GNOME ones
+# unwanted packages from @kde-desktop
+# don't include these for now to fit on a cd
 -desktop-backgrounds-basic
-kde-wallpapers
+-kdeaccessibility*
+-kdeartwork-screensavers	# screensavers are not needed on live images
+#-ktorrent			# kget has also basic torrent features (~3 megs)
+-digikam			# digikam has duplicate functionality with gwenview (~28 megs)
+#-amarok 			# ~23 megs (mysql-embedded etc.)
+-kipi-plugins			# ~8 megs + drags in Marble
+#-kdeplasma-addons		# ~16 megs
+#-krusader			# ~4 megs
 
-# Additional packages that are not default in kde-desktop but useful
+# Additional packages that are not default in kde-* groups, but useful
 k3b				# ~15 megs
 #kdeartwork			# only include some parts of kdeartwork
 fuse
 liveusb-creator
-#pavucontrol			# pavucontrol has duplicate functionality with kmix
-krusader			# file manager, more power-user-oriented than Dolphin (~4 megs)
 
-# kdeedu apps
-@kde-education
+# only include kdegames-minimal
+-kdegames
+kdegames-minimal
 
-# Cantor backends
-cantor-R		# Cantor R backend, built against R-core at compile time
-maxima			# runtime dependency of the Cantor Maxima backend
-octave			# runtime dependency of the Cantor Octave backend
+### space issues
 
-# KDE 4 translations
-kde-l10n-*
-calligra-l10n-*
+# fonts (we make no bones about admitting we're english-only)
+wqy-microhei-fonts			# a compact CJK font, to replace:
+-naver-nanum-gothic-fonts		# Korean
+-vlgothic-fonts				# Japanese
+-adobe-source-han-sans-cn-fonts		# simplified Chinese
+-adobe-source-han-sans-twhk-fonts	# traditional Chinese
+
+-paratype-pt-sans-fonts	# Cyrillic (already supported by DejaVu), huge
+#-stix-fonts		# mathematical symbols
+
+# remove input methods to free space
+-@input-methods
+-scim*
+-m17n*
+-ibus*
+-iok
+
+# save some space (from @standard)
+-make
+
+# admin-tools
+-gnome-disk-utility
+# kcm_clock still lacks some features, so keep system-config-date around
+#-system-config-date
+# prefer kcm_systemd
+-system-config-services
+# prefer/use kusers
+-system-config-users
 
 ## avoid serious bugs by omitting broken stuff
 

fedora-live-mate_compiz.ks

@@ -1,11 +1,53 @@
+# Desktop with customizations to fit in a CD (package removals, etc.)
 # Maintained by the Fedora Desktop SIG:
 # http://fedoraproject.org/wiki/SIGs/Desktop
 # mailto:desktop@lists.fedoraproject.org
 
 %include fedora-live-base.ks
 %include fedora-mate-packages.ks
+%include fedora-live-minimization.ks
 
-part / --size 4096 
+part / --size 6144
+
+%packages
+
+# Drop things for size
+-@3d-printing
+-brasero
+-bluez
+-bluez-cups
+-colord
+-fedora-icon-theme
+-GConf2
+-gnome-bluetooth-libs
+-gnome-icon-theme
+-gnome-icon-theme-symbolic
+-gnome-software
+-gnome-themes
+-gnome-themes-standard
+-gnome-user-docs
+
+-@mate-applications
+-mate-icon-theme-faenza
+-NetworkManager-bluetooth
+
+# Drop oversized fonts that aren't needed
+
+# Drop things that pull in perl
+
+# Dictionaries are big
+# we're going to try keeping hunspell-* after notting, davidz, and ajax voiced
+# strong preference to giving it a go on #fedora-desktop.
+# also see http://bugzilla.gnome.org/681084
+
+# Help and art can be big, too
+-gnome-user-docs
+-evolution-help
+
+# Legacy cmdline things we don't want
+-telnet
+
+%end
 
 %post
 cat >> /etc/rc.d/init.d/livesys << EOF
@@ -40,4 +82,7 @@ chown -R liveuser:liveuser /home/liveuser/
 restorecon -R /home/liveuser/
 EOF
 
+# This is a huge file and things work ok without it
+rm -f /usr/share/icons/HighContrast/icon-theme.cache
+
 %end

fedora-livecd-kde.ks

@@ -1,76 +0,0 @@
-# fedora-livecd-kde.ks
-#
-# Description:
-# - Fedora Live Spin with the K Desktop Environment (KDE), default 1.4 GB version
-#
-# Maintainer(s):
-# - Sebastian Vahl <fedora@deadbabylon.de>
-# - Fedora KDE SIG, http://fedoraproject.org/wiki/SIGs/KDE, kde@lists.fedoraproject.org
-
-%include fedora-live-kde-base.ks
-%include fedora-live-minimization.ks
-
-# DVD payload
-part / --size=4096
-
-
-%packages
-# unwanted packages from @kde-desktop
-# don't include these for now to fit on a cd
--desktop-backgrounds-basic
--kdeaccessibility*
--kdeartwork-screensavers	# screensavers are not needed on live images
-#-ktorrent			# kget has also basic torrent features (~3 megs)
--digikam			# digikam has duplicate functionality with gwenview (~28 megs)
-#-amarok 			# ~23 megs (mysql-embedded etc.)
--kipi-plugins			# ~8 megs + drags in Marble
-#-kdeplasma-addons		# ~16 megs
-#-krusader			# ~4 megs
-
-# Additional packages that are not default in kde-* groups, but useful
-k3b				# ~15 megs
-#kdeartwork			# only include some parts of kdeartwork
-fuse
-liveusb-creator
-
-# only include kdegames-minimal
--kdegames
-kdegames-minimal
-
-### space issues
-
-# fonts (we make no bones about admitting we're english-only)
-wqy-microhei-fonts			# a compact CJK font, to replace:
--naver-nanum-gothic-fonts		# Korean
--vlgothic-fonts				# Japanese
--adobe-source-han-sans-cn-fonts		# simplified Chinese
--adobe-source-han-sans-twhk-fonts	# traditional Chinese
-
--paratype-pt-sans-fonts	# Cyrillic (already supported by DejaVu), huge
-#-stix-fonts		# mathematical symbols
-
-# remove input methods to free space
--@input-methods
--scim*
--m17n*
--ibus*
--iok
-
-# save some space (from @standard)
--make
-
-# admin-tools
--gnome-disk-utility
-# kcm_clock still lacks some features, so keep system-config-date around
-#-system-config-date
-# prefer kcm_systemd
--system-config-services
-# prefer/use kusers
--system-config-users
-
-## avoid serious bugs by omitting broken stuff
-
-%end
-
-%post
-%end

fedora-livecd-mate_compiz.ks

@@ -1,77 +0,0 @@
-# Desktop with customizations to fit in a CD (package removals, etc.)
-# Maintained by the Fedora Desktop SIG:
-# http://fedoraproject.org/wiki/SIGs/Desktop
-# mailto:desktop@lists.fedoraproject.org
-
-%include fedora-live-mate_compiz.ks
-%include fedora-live-minimization.ks
-
-%packages
-
-# some apps from mate-applications
-caja-actions
-mate-disk-usage-analyzer
-mate-netspeed
-
-# system tools
-system-config-printer
-system-config-printer-applet
-
-# audio player
-audacious
-
-# office
-@libreoffice
-
-# dsl tools
-rp-pppoe
-
-# First, no office
-#-planner
-
-# Drop things for size
--@3d-printing
--brasero
--bluez
--bluez-cups
--colord
--@dial-up
--espeak
--fedora-icon-theme
--GConf2
--gnome-bluetooth-libs
--gnome-icon-theme
--gnome-icon-theme-symbolic
--gnome-software
--gnome-themes
--gnome-themes-standard
--gnome-user-docs
-
--@mate-applications
--mate-icon-theme-faenza
--NetworkManager-bluetooth
-
-# Drop oversized fonts that aren't needed
-
-# Drop things that pull in perl
-
-# Dictionaries are big
-# we're going to try keeping hunspell-* after notting, davidz, and ajax voiced
-# strong preference to giving it a go on #fedora-desktop.
-# also see http://bugzilla.gnome.org/681084
-
-# Help and art can be big, too
--gnome-user-docs
--evolution-help
--desktop-backgrounds-basic
--*backgrounds-extras
-
-# Legacy cmdline things we don't want
-
-%end
-
-%post
-# This is a huge file and things work ok without it
-rm -f /usr/share/icons/HighContrast/icon-theme.cache
-
-%end

fedora-livedvd-electronic_lab.ks

@@ -1,59 +0,0 @@
-# Description : Live DVD image for Fedora/Free Electronic Lab
-#
-# Maintainer(s):
-# - Chitlesh Goorah <chitlesh a fedoraproject.org>
-# - Thibault North  <tnorth   a fedoraproject.org>
-
-%include fedora-live-workstation.ks
-
-# DVD payload
-part / --size 10240
-
-%packages
-
-@electronic-lab
-
-# Support for the Milkymist hardware community
-@milkymist
-
-
-# Office
-dia
-vym
-libreoffice-writer
-libreoffice-calc
-libreoffice-impress
-#libreoffice-extendedPDF
-planner
-graphviz
-
-
-# debugging tools
-make
-gdb
-valgrind
-kdbg
-wireshark-gnome
-qemu
-
-
-# EDA/CAD department
-perl-Test-Pod
-perl-Test-Pod-Coverage
-
-
-# Removing unnecessary packages from the desktop spin
--abiword
--@games
--gimp
--gimp-libs
--gimp-data-extras
--kdebluetooth
--kbluetooth
--rdesktop
-
-%end
-
-%post
-
-%end

fedora-mate-packages.ks

@@ -21,6 +21,30 @@ fusion-icon-gtk
 @libreoffice
 @networkmanager-submodules
 
+# some apps from mate-applications
+caja-actions
+mate-disk-usage-analyzer
+mate-netspeed
+mate-themes-extras
+
+# more backgrounds
+f22-backgrounds-mate
+f21-backgrounds-extras-base
+f21-backgrounds-extras-mate
+
+# system tools
+system-config-printer
+system-config-printer-applet
+
+# audio player
+audacious
+
+# office
+@libreoffice
+
+# dsl tools
+rp-pppoe
+
 # FIXME; apparently the glibc maintainers dislike this, but it got put into the
 # desktop image at some point.  We won't touch this one for now.
 nss-mdns

fedora-virt-server.ks.in

@@ -1,72 +0,0 @@
-# Kickstart file to create a small "base" Fedora image install suitable
-# for use as e.g. an application server.
-# 
-# Maintainer: fedora-cloud-list@fedoraproject.org
-#
-# REQUIRED variables:
-#   @@PUBLIC_KEY@@ - ssh public key
-# 
-# You must search for all required variables and replace them.
-# Example usage:
-# sed -e s,@@PUBLIC_KEY@@,"$(cat ~/.ssh/authorized_keys)", fedora-virt-server.ks.in > my-fedora-server.ks
-
-lang C
-keyboard us
-timezone --utc GMT/Zulu
-auth --useshadow --enablemd5
-firewall --service=ssh
-bootloader --timeout=1 --append="acpi=force"
-network --bootproto=dhcp --device=eth0 --onboot=on
-services --enabled=network
-
-## IMPORTANT ##
-## EDIT HERE ##
-# ROOT PASSWORD:
-# Setting a root password is NOT RECOMMENDED, especially if your
-# server will be accessible to the public internet.  This is
-# because of the rise of automated ssh password guessing attacks.
-# You should instead (if you don't have one already)
-# generate a public ssh key:
-# http://sial.org/howto/openssh/publickey-auth/
-# 
-# See comment below in %post for authorizing your public
-# key for the root account.
-
-rootpw ""
-
-# However, if you choose instead to make a password,
-# you will need to replace the above line with one like
-# rootpw --iscrypted @@ROOT_PASSWORD_CRYPTED@@
-# If you do neither of these things, you will not be able to log
-# into your machine.
-
-clearpart --all --initlabel
-part / --size=550 --grow --fstype=ext4
-# You may change this if you don't want swap
-part swap --recommended
-
-%packages
-@standard
-%end
-
-#
-# Add custom post scripts after the base post.
-#
-%post
-
-## EDIT HERE ##
-cd /root
-if ! test -d .ssh; then
-  mkdir --mode=700 .ssh
-fi
-cat >> .ssh/authorized_keys << END_AUTHORIZED_KEYS
-@@PUBLIC_KEY@@
-END_AUTHORIZED_KEYS
-chmod 600 .ssh/authorized_keys
-if -x /usr/sbin/selinuxenabled && /usr/sbin/selinuxenabled; then
-  chcon -R -h -t home_ssh_t .ssh
-fi
-
-%end
-
-reboot

fedora-workstation-packages.ks

@@ -2,7 +2,6 @@
 
 # Exclude unwanted groups that fedora-live-base.ks pulls in
 -@dial-up
--@fedora-release-nonproduct
 -@input-methods
 -@standard
 
@@ -10,6 +9,7 @@
 # workstation-product-environment in comps
 @base-x
 @core
+@firefox
 @fonts
 @guest-desktop-agents
 @hardware-support