Bump KDE live root partition size to 7G

This is needed for current F32, 6.5G is too small. The live image creation hangs near the end. Just noticed this after enabling KDE live image build test for F32 updates. Signed-off-by: Adam Williamson <awilliam@redhat.com>
Revert "remove systemd package from fedora-container-base"
2025-12-09 16:40:30 +08:00 · 2021-04-26 15:33:39 -07:00 · 2020-07-14 12:01:17 -04:00 · 2020-05-31 17:17:00 +05:30 · 2020-05-02 16:39:02 +00:00 · 2020-04-28 11:32:37 +01:00
47 changed files with 896 additions and 254 deletions
--- a/README.md
+++ b/README.md
@@ -1,15 +1,13 @@
 # fedora-kickstarts #

-This project is used to manage the Fedora kickstart files used in composing Fedora release images.
+This project is used to manage the Fedora kickstart files used in composing Fedora release images. 

-The master branch is used by rawhide and each release branch is used by that release.
+The master branch is used by rawhide and each release branch is used by that release. 

-All changes should be made via the PR workflow.
+All changes should be made via the PR workflow. 

-This project is packaged in Fedora as the spin-kickstarts package allowing users to see
-and modify the kickstart files for their local needs.
-
-Maintainers for each image are listed in the `maintainers.toml` file.
+This project is packaged in Fedora as the spin-kickstarts package allowing users to see 
+and modify the kickstart files for their local needs. 

 ## To make a release ##

@@ -26,18 +24,6 @@ Maintainers for each image are listed in the `maintainers.toml` file.
    # Clean up the generated files:
    make clean

-## Build logs ##
-
-To see build logs go to
-
-https://koji.fedoraproject.org/koji
-
-"Packages" tab, and filter by Fedora-Workstation-Live for example.
-
-Technical info about the officialy released images can be found at
-
-https://kojipkgs.fedoraproject.org/compose/
-
 # bug reports #

 Bugs should be reported to the spin-kickstarts bugzilla component:
--- a/fedora-arm-base.ks
+++ b/fedora-arm-base.ks
@@ -3,7 +3,7 @@ lang en_US.UTF-8
 selinux --enforcing
 firewall --enabled --service=mdns,ssh

-bootloader --extlinux --location=mbr
+bootloader --location=mbr

 part /boot/efi --size=80 --fstype vfat --asprimary
 part /boot --size=512 --fstype ext4 --asprimary
@@ -11,7 +11,7 @@ part /boot --size=512 --fstype ext4 --asprimary
 # make sure that initial-setup runs and lets us do all the configuration bits
 firstboot --reconfig

-services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup,zram-swap

 %include fedora-repo.ks

@@ -19,6 +19,7 @@ services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup
@core
@standard
@hardware-support
+zram

 kernel
 # remove this in %post
@@ -56,7 +57,7 @@ releasever=$(rpm --eval '%{fedora}')
 basearch=armhfp
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
 echo "Packages within this ARM disk image"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*

--- a/fedora-arm-kde.ks
+++ b/fedora-arm-kde.ks
@@ -2,10 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-kde-common.ks

-part btrfs.007 --fstype="btrfs" --size=7000
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
+part / --size=6300 --fstype ext4

 %post

--- a/fedora-arm-lxde.ks
+++ b/fedora-arm-lxde.ks
@@ -2,10 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-lxde-common.ks

-part btrfs.007 --fstype="btrfs" --size=4300
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
+part / --size=4000 --fstype ext4

 %post

--- a/fedora-arm-lxqt.ks
+++ b/fedora-arm-lxqt.ks
@@ -2,10 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-lxqt-common.ks

-part btrfs.007 --fstype="btrfs" --size=4400
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
+part / --size=4400 --fstype ext4 --asprimary

 %packages
 # trojita not available on non-x86 platforms
--- a/fedora-arm-mate.ks
+++ b/fedora-arm-mate.ks
@@ -2,10 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-mate-common.ks

-part btrfs.007 --fstype="btrfs" --size=7168
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
+part / --size=7168 --fstype ext4

 %post

--- a/fedora-arm-minimal.ks
+++ b/fedora-arm-minimal.ks
@@ -1,7 +1,7 @@
 %include fedora-arm-base.ks
 %include fedora-minimal-common.ks

-part / --size=1500 --fstype ext4
+part / --size=1400 --fstype ext4

 %packages
 -xkeyboard-config
--- a/fedora-arm-python-classroom.ks
+++ b/fedora-arm-python-classroom.ks
@@ -4,27 +4,5 @@

 # The ARM Workstion based Python Classroom Lab

-%include fedora-arm-base.ks
-%include fedora-arm-xbase.ks
-%include fedora-workstation-common.ks
+%include fedora-arm-workstation.ks
 %include fedora-python-classroom-gnome-common.ks
-
-part btrfs.007 --fstype="btrfs" --size=7000
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
-
-%packages
-initial-setup
-initial-setup-gui
-libvirt*
-gnome-boxes
-
-%end
-
-%post
-# Most of the ARM X accelerated drivers need some level of CMA allocation
-sed -i 's/\(append .*\)/\1 cma=256MB/' /boot/extlinux/extlinux.conf
-
-%end
-
--- a/fedora-arm-server.ks
+++ b/fedora-arm-server.ks
@@ -4,7 +4,6 @@
 part / --size=2500 --fstype xfs

 %packages
-fedora-release-server
 # install the default groups for the server environment since installing the environment is not working
@server-product
@standard
--- a/fedora-arm-soas.ks
+++ b/fedora-arm-soas.ks
@@ -2,10 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-soas-common.ks

-part btrfs.007 --fstype="btrfs" --size=3400
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
+part / --size=3300 --fstype ext4 --asprimary

 %post

--- a/fedora-arm-workstation.ks
+++ b/fedora-arm-workstation.ks
@@ -2,10 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-workstation-common.ks

-part btrfs.007 --fstype="btrfs" --size=6200
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
+part / --size=6200 --fstype ext4

 %packages
 -initial-setup
--- a/fedora-arm-xfce.ks
+++ b/fedora-arm-xfce.ks
@@ -2,10 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-xfce-common.ks

-part btrfs.007 --fstype="btrfs" --size=5200
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs / --subvol --name=root LABEL=fedora
+part / --size=5000 --fstype ext4

 %post

--- a/fedora-cinnamon-common.ks
+++ b/fedora-cinnamon-common.ks
@@ -8,14 +8,12 @@

 %packages

-fedora-release-cinnamon
@networkmanager-submodules
@cinnamon-desktop
@libreoffice
 parole
-rhythmbox

 # extra backgrounds
-f33-backgrounds-extras-gnome
+f32-backgrounds-extras-gnome

 %end
--- a/fedora-cloud-atomic-pxetolive.ks
+++ b/fedora-cloud-atomic-pxetolive.ks
@@ -0,0 +1,36 @@
+# PXE-to-Live Atomic: PXE boot directly into a running Atomic Host
+# https://fedoraproject.org/wiki/Changes/AtomicHost
+
+lang en_US.UTF-8
+keyboard us
+timezone America/New_York
+zerombr
+clearpart --all --initlabel
+rootpw --lock --iscrypted locked
+user --name=none
+bootloader --timeout=1
+network --bootproto=dhcp --device=link --activate
+# We are only able to install atomic with separate /boot partition currently
+part / --fstype="ext4" --size=6000
+part /boot --size=500 --fstype="ext4"
+shutdown
+services --disabled=docker-storage-setup
+services --enabled=NetworkManager,sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
+ 
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/22/ --ref=fedora-atomic/f22/x86_64/docker-host
+ 
+%post
+
+# Ensure the root password is locked, we use cloud-init
+passwd -l root
+userdel -r none
+
+# We copy content of separate /boot partition to root part when building live squashfs image,
+# and we don't want systemd to try to mount it when pxe booting
+cat /dev/null > /etc/fstab
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network off
+
+%end
--- a/fedora-cloud-base-gcp.ks
+++ b/fedora-cloud-base-gcp.ks
@@ -1,25 +0,0 @@
-# This is a basic Fedora cloud spin designed to work with GCP.
-# Note that GCP prefers UEFI so we'll need to make sure this image
-# is created from a machine that is started in UEFI mode.
-
-# Inherit from cloud base
-%include fedora-cloud-base.ks
-
-# Change serial port configuration to recommended default for GCP (ttyS0,38400n8d)
-# Don't show bootloader as it's impossible for the user to get to it in time
-# So we might as well not waste the 1 second on each boot.
-# https://cloud.google.com/compute/docs/import/import-existing-image
-bootloader --timeout=0 --append="no_timer_check net.ifnames=0 console=ttyS0,38400n8d"
-
-#%packages
-#%end
-
-%post --erroronfail
-cat <<EOF > /etc/NetworkManager/conf.d/gcp-mtu.conf
-# In GCP it is recommended to use 1460 as the MTU.
-# Set it to 1460 for all connections.
-# https://cloud.google.com/network-connectivity/docs/vpn/concepts/mtu-considerations
-[connection]
-ethernet.mtu = 1460
-EOF
-%end
--- a/fedora-cloud-base-vagrant.ks
+++ b/fedora-cloud-base-vagrant.ks
@@ -53,12 +53,6 @@ EOKEYS
 chmod 600 ~vagrant/.ssh/authorized_keys
 chown -R vagrant:vagrant ~vagrant/.ssh/

-cat > /etc/ssh/sshd_config.d/10-vagrant-insecure-rsa-key.conf <<EOF
-# For now the vagrant insecure key is an rsa key
-# https://github.com/hashicorp/vagrant/issues/11783
-PubkeyAcceptedKeyTypes=+ssh-rsa
-EOF
-
 # Further suggestion from @purpleidea (James Shubin) - extend key to root users as well
 mkdir -m 0700 -p /root/.ssh
 cp /home/vagrant/.ssh/authorized_keys /root/.ssh/authorized_keys
--- a/fedora-cloud-base.ks
+++ b/fedora-cloud-base.ks
@@ -4,6 +4,9 @@
 # keys. Cloud-init creates a user account named "fedora" with passwordless
 # sudo access. The root password is empty and locked by default.
 #
+# Note that unlike the standard Fedora install, this image has /tmp on disk
+# rather than in tmpfs, since memory is usually at a premium.
+#
 # This kickstart file is designed to be used with ImageFactory (in Koji).
 #
 # To do a local build, you'll need to install ImageFactory.  See
@@ -34,6 +37,7 @@ firewall --disabled
 # We pass net.ifnames=0 because we always want to use eth0 here on all the cloud images.
 bootloader --timeout=1 --append="no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"

+network --bootproto=dhcp --device=link --activate --onboot=on
 services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final

 zerombr
@@ -44,78 +48,217 @@ autopart --noboot --nohome --noswap --nolvm

 reboot

-##### begin package list #############################################
-%packages --instLangs=en
+# Package list.
+# FIXME: instLangs does not work, so there's a hack below
+# (see https://bugzilla.redhat.com/show_bug.cgi?id=1051816)
+# FIXME: instLangs bug has been fixed but now having instLangs
+# with an arg causes no langs to get installed because of BZ1262040
+# which yields the errors in BZ1261249. For now fix by not using
+# --instLangs at all
+#%packages --instLangs=en
+%packages

-# Include packages for the cloud-server-environment group
-@^cloud-server-environment
-
-# Don't include the kernel toplevel package since it pulls in
-# kernel-modules. We're happy for now with kernel-core.
-kernel
 kernel-core
+@^cloud-server-environment
+# Need to pull in the udev subpackage
+systemd-udev

-# Don't include dracut-config-rescue. It will have dracut generate a
-# "rescue" entry in the grub menu, but that also means there is a
-# rescue kernel and initramfs that get created, which (currently) add
-# about another 40MiB to the /boot/ partition. Also the "rescue" mode
-# is generally not useful in the cloud.
+# after move away from grub2 - let's add 'which' back
+which
+
+# rescue mode generally isn't useful in the cloud context
 -dracut-config-rescue

-# Plymouth provides a graphical boot animation. In the cloud we don't
-# need a graphical boot animation. This also means anaconda won't put
-# rhgb/quiet on kernel command line
+# Some things from @core we can do without in a minimal install
+-biosdevname
+# Need to also add back plymouth in order to mask failure of
+# systemd-vconsole-setup.service. BZ#1272684. Comment out for now
+#-plymouth
+-iprutils
+# Now that BZ#1199868 is fixed kbd really gets removed but it breaks
+# systemd-vconsole-setup.service on boot. Comment out for now
+#-kbd
+-uboot-tools
+-kernel
+# No need for plymouth. Also means anaconda won't put rhgb/quiet
+# on kernel command line
 -plymouth

-# No need for firewalld for now. We don't have a firewall on by default.
-firewalld
-
-# noswap on Cloud for now
-zram-generator-defaults
-
-# Don't include the geolite2 databases, which end up with 66MiB
-# in /usr/share/GeoIP
-geolite2-country
-geolite2-city
 %end
-##### end package list ###############################################


-##### begin kickstart post ###########################################
+
 %post --erroronfail

-# linux-firmware is installed by default and is quite large. As of mid 2020:
-#   Total download size: 97 M
-#   Installed size: 268 M
-# So far we've been fine shipping without it so let's continue.
-# More discussion about this in #1234504.
+# Create grub.conf for EC2. This used to be done by appliance creator but
+# anaconda doesn't do it. And, in case appliance-creator is used, we're
+# overriding it here so that both cases get the exact same file.
+# Note that the console line is different -- that's because EC2 provides
+# different virtual hardware, and this is a convenient way to act differently
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+
+
+#link grub.conf to menu.lst for ec2 to work
+echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# older versions of livecd-tools do not follow "rootpw --lock" line above
+# https://bugzilla.redhat.com/show_bug.cgi?id=964299
+passwd -l root
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# this is installed by default but we don't need it in virt
+# Commenting out the following for #1234504
+# rpm works just fine for removing this, no idea why dnf can't cope
 echo "Removing linux-firmware package."
 rpm -e linux-firmware

-# See the systemd-random-seed.service man page that says:
-#   " It is recommended to remove the random seed from OS images intended
-#     for replication on multiple systems"
+# Remove firewalld; was supposed to be optional in F18+, but is pulled in
+# in install/image building.
+echo "Removing firewalld."
+# FIXME! clean_requirements_on_remove is the default with DNF, but may
+# not work when package was installed by Anaconda instead of command line.
+# Also -- check if this is still even needed with new anaconda -- disabled
+# firewall should _not_ pull in this package.
+# dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
+dnf -C -y erase "firewalld*"
+
+# Another one needed at install time but not after that, and it pulls
+# in some unneeded deps (like, newt and slang)
+echo "Removing authconfig."
+dnf -C -y erase authconfig
+
+# instlang hack. (Note! See bug referenced above package list)
+find /usr/share/locale -mindepth  1 -maxdepth 1 -type d -not -name en_US -exec rm -rf {} +
+localedef --list-archive | grep -v ^en_US | xargs localedef --delete-from-archive
+# this will kill a live system (since it's memory mapped) but should be safe offline
+mv -f /usr/lib/locale/locale-archive /usr/lib/locale/locale-archive.tmpl
+build-locale-archive
+echo '%_install_langs C:en:en_US:en_US.UTF-8' >> /etc/rpm/macros.image-language-conf
+
+
+echo -n "Getty fixes"
+# although we want console output going to the serial console, we don't
+# actually have the opportunity to login there. FIX.
+# we don't really need to auto-spawn _any_ gettys.
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+# and https://bugzilla.redhat.com/show_bug.cgi?id=1204612
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+DEVTIMEOUT=10
+EOF
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
+# Because memory is scarce resource in most cloud/virt environments,
+# and because this impedes forensics, we are differing from the Fedora
+# default of having /tmp on tmpfs.
+echo "Disabling tmpfs for /tmp."
+systemctl mask tmp.mount
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# Uncomment this if you want to use cloud init but suppress the creation
+# of an "ec2-user" account. This will, in the absence of further config,
+# cause the ssh key from a metadata source to be put in the root account.
+#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
+#users: []
+#disable_root: 0
+#EOF
+
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/systemd/random-seed

+echo "Cleaning old dnf repodata."
+# FIXME: clear history?
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
+truncate -c -s 0 /var/log/dnf.rpm.log
+
 echo "Import RPM GPG key"
 releasever=$(rpm --eval '%{fedora}')
 basearch=$(uname -i)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch

+echo "Packages within this cloud image:"
+echo "-----------------------------------------------------------------------"
+rpm -qa
+echo "-----------------------------------------------------------------------"
+# Note that running rpm recreates the rpm db files which aren't needed/wanted
+rm -f /var/lib/rpm/__db*
+
+# FIXME: is this still needed?
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+# ignore return code because UEFI systems with vfat filesystems
+# that don't support selinux will give us errors
+/usr/sbin/fixfiles -R -a restore || true
+
 echo "Zeroing out empty space."
 # This forces the filesystem to reclaim space from deleted files
 dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
 rm -f /var/tmp/zeros
 echo "(Don't worry -- that out-of-space error was expected.)"

-# When we build the image a networking config file gets left behind.
-# Let's clean it up.
-echo "Cleanup leftover networking configuration"
-rm -f /etc/NetworkManager/system-connections/*.nmconnection
+# When we build the image with oz, dracut is used
+# and sets up a ifcfg-en<whatever> for the device. We don't
+# want to use this, we use eth0 so it is always the same.
+# So we remove all these ifcfg-en<whatever> devices so
+# The 'network' service can come up cleanly.
+rm -f /etc/sysconfig/network-scripts/ifcfg-en*

-# Clear machine-id on pre generated images
-truncate -s 0 /etc/machine-id
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+# Remove machine-id on pre generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+# Anaconda is writing an /etc/resolv.conf from the install environment.
+# The system should start out with an empty file, otherwise cloud-init
+# will try to use this information and may error:
+# https://bugs.launchpad.net/cloud-init/+bug/1670052
+truncate -s 0 /etc/resolv.conf

 %end
-##### end kickstart post ############################################
+
--- a/fedora-cloud-bigdata.ks
+++ b/fedora-cloud-bigdata.ks
@@ -0,0 +1,220 @@
+# This is a Fedora 21 spin designed based on the Fedora Cloud Base Image
+# but tailored specifically for Big Data processing out-of-the-box.
+# Primarily, it builds on that image but adds extra packages, but over
+# time may have additional focus.
+#
+# It's configured with cloud-init so it will take advantage of
+# ec2-compatible metadata services for provisioning ssh keys. Cloud-init
+# creates a user account named "fedora" with passwordless sudo access. The
+# root password is empty and locked by default.
+#
+# Note that unlike the standard F20 install, this image has /tmp on disk
+# rather than in tmpfs, since memory is usually at a premium.
+
+text
+lang en_US.UTF-8
+keyboard us
+timezone --utc Etc/UTC
+
+selinux --enforcing
+rootpw --lock --iscrypted locked
+user --name=none
+
+firewall --disabled
+
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
+
+network --bootproto=dhcp --device=eth0 --activate --onboot=on
+services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
+
+zerombr
+clearpart --all
+part / --size 3000 --fstype ext4
+
+%include fedora-repo.ks
+
+
+reboot
+
+# Package list.
+%packages
+
+fedora-release-cloud
+
+kernel-core
+@core
+@cloud-server
+
+# Needed initially, but removed below.
+firewalld
+
+# rescue mode generally isn't useful in the cloud context
+-dracut-config-rescue
+
+# Some things from @core we can do without in a minimal install
+-biosdevname
+-plymouth
+-NetworkManager
+-iprutils
+-kbd
+-uboot-tools
+-kernel
+-grub2
+
+%end
+
+
+
+%post --erroronfail
+
+# Create grub.conf for EC2. This used to be done by appliance creator but
+# anaconda doesn't do it. And, in case appliance-creator is used, we're
+# overriding it here so that both cases get the exact same file.
+# Note that the console line is different -- that's because EC2 provides
+# different virtual hardware, and this is a convenient way to act differently
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+
+
+#link grub.conf to menu.lst for ec2 to work
+echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# older versions of livecd-tools do not follow "rootpw --lock" line above
+# https://bugzilla.redhat.com/show_bug.cgi?id=964299
+passwd -l root
+# remove the user anaconda forces us to make
+userdel -r none
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# this is installed by default but we don't need it in virt
+# Commenting out the following for #1234504
+# rpm works just fine for removing this, no idea why dnf can't cope
+echo "Removing linux-firmware package."
+rpm -e linux-firmware
+
+# Remove firewalld; was supposed to be optional in F18+, but is required to
+# be present for install/image building.
+echo "Removing firewalld."
+dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+
+# Another one needed at install time but not after that, and it pulls
+# in some unneeded deps (like, newt and slang)
+echo "Removing authconfig."
+dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
+
+echo -n "Getty fixes"
+# although we want console output going to the serial console, we don't
+# actually have the opportunity to login there. FIX.
+# we don't really need to auto-spawn _any_ gettys.
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
+# Because memory is scarce resource in most cloud/virt environments,
+# and because this impedes forensics, we are differing from the Fedora
+# default of having /tmp on tmpfs.
+echo "Disabling tmpfs for /tmp."
+systemctl mask tmp.mount
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# Uncomment this if you want to use cloud init but suppress the creation
+# of an "ec2-user" account. This will, in the absence of further config,
+# cause the ssh key from a metadata source to be put in the root account.
+#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
+#users: []
+#disable_root: 0
+#EOF
+
+echo "Removing random-seed so it's not the same in every image."
+rm -f /var/lib/systemd/random-seed
+
+echo "Cleaning old dnf repodata."
+dnf history new
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
+
+echo "Import RPM GPG key"
+releasever=$(rpm --eval '%{fedora}')
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
+
+echo "Packages within this cloud image:"
+echo "-----------------------------------------------------------------------"
+rpm -qa
+echo "-----------------------------------------------------------------------"
+# Note that running rpm recreates the rpm db files which aren't needed/wanted
+rm -f /var/lib/rpm/__db*
+
+# This is a temporary workaround for
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
+# where sfdisk seems to be messing up the mbr.
+# Long-term fix is to address this in anaconda directly and remove this.
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
+dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
+
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/dnf
+/usr/sbin/fixfiles -R -a restore
+
+echo "Zeroing out empty space."
+# This forces the filesystem to reclaim space from deleted files
+dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
+rm -f /var/tmp/zeros
+echo "(Don't worry -- that out-of-space error was expected.)"
+
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+%end
+
--- a/fedora-cloud-experimental.ks
+++ b/fedora-cloud-experimental.ks
@@ -0,0 +1,215 @@
+# This is a spin of the Fedora cloud image designed for trying out new
+# images in rawhide. It won't be built for non-rawhide trees, let alone
+# actual releases.
+
+cmdline
+lang en_US.UTF-8
+keyboard us
+timezone --utc Etc/UTC
+
+auth --useshadow --passalgo=sha512
+selinux --enforcing
+rootpw --lock --iscrypted locked
+user --name=none
+
+firewall --disabled
+
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
+
+network --bootproto=dhcp --device=eth0 --activate --onboot=on
+services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
+
+zerombr
+clearpart --all
+part / --size 3000 --fstype ext4
+
+%include fedora-repo.ks
+
+
+reboot
+
+# Package list.
+%packages --excludedocs --instLangs=en_US
+
+fedora-release-cloud
+
+kernel-core
+@core
+@cloud-server
+
+# rescue mode generally isn't useful in the cloud context
+-dracut-config-rescue
+
+# Needed initially, but removed below.
+firewalld
+
+# Some things from @core we can do without in a minimal install
+-biosdevname
+-plymouth
+-NetworkManager
+-iprutils
+-kbd
+-uboot-tools
+-kernel
+-grub2
+
+%end
+
+
+
+%post --erroronfail
+
+# Create grub.conf for EC2. This used to be done by appliance creator but
+# anaconda doesn't do it. And, in case appliance-creator is used, we're
+# overriding it here so that both cases get the exact same file.
+# Note that the console line is different -- that's because EC2 provides
+# different virtual hardware, and this is a convenient way to act differently
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+
+
+#link grub.conf to menu.lst for ec2 to work
+echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# older versions of livecd-tools do not follow "rootpw --lock" line above
+# https://bugzilla.redhat.com/show_bug.cgi?id=964299
+passwd -l root
+# remove the user anaconda forces us to make
+userdel -r none
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# this is installed by default but we don't need it in virt
+# Commenting out the following for #1234504
+# rpm works just fine for removing this, no idea why dnf can't cope
+echo "Removing linux-firmware package."
+rpm -e linux-firmware
+
+# Remove firewalld; was supposed to be optional in F18+, but is required to
+# be present for install/image building.
+echo "Removing firewalld."
+dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
+
+# Another one needed at install time but not after that, and it pulls
+# in some unneeded deps (like, newt and slang)
+echo "Removing authconfig."
+dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
+
+echo -n "Getty fixes"
+# although we want console output going to the serial console, we don't
+# actually have the opportunity to login there. FIX.
+# we don't really need to auto-spawn _any_ gettys.
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
+# Because memory is scarce resource in most cloud/virt environments,
+# and because this impedes forensics, we are differing from the Fedora
+# default of having /tmp on tmpfs.
+echo "Disabling tmpfs for /tmp."
+systemctl mask tmp.mount
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# Uncomment this if you want to use cloud init but suppress the creation
+# of an "ec2-user" account. This will, in the absence of further config,
+# cause the ssh key from a metadata source to be put in the root account.
+#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
+#users: []
+#disable_root: 0
+#EOF
+
+echo "Removing random-seed so it's not the same in every image."
+rm -f /var/lib/systemd/random-seed
+
+echo "Cleaning old dnf repodata."
+dnf history new
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
+
+echo "Import RPM GPG key"
+releasever=$(rpm --eval '%{fedora}')
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
+
+echo "Packages within this cloud image:"
+echo "-----------------------------------------------------------------------"
+rpm -qa
+echo "-----------------------------------------------------------------------"
+# Note that running rpm recreates the rpm db files which aren't needed/wanted
+rm -f /var/lib/rpm/__db*
+
+
+# This is a temporary workaround for
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
+# where sfdisk seems to be messing up the mbr.
+# Long-term fix is to address this in anaconda directly and remove this.
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
+dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
+
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/dnf
+chattr -i /boot/extlinux/ldlinux.sys
+/usr/sbin/fixfiles -R -a restore
+chattr +i /boot/extlinux/ldlinux.sys
+
+echo "Zeroing out empty space."
+# This forces the filesystem to reclaim space from deleted files
+dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
+rm -f /var/tmp/zeros
+echo "(Don't worry -- that out-of-space error was expected.)"
+
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+%end
+
--- a/fedora-comp-neuro-common.ks
+++ b/fedora-comp-neuro-common.ks
@@ -14,7 +14,6 @@ R
 julia

 #Computational neuroscience packages
-arbor
 auryn-mpich
 auryn-openmpi
 bionetgen
@@ -27,8 +26,9 @@ gnuplot
 moose
 nest
 neuron
+neurord
 octave
-# paraview
+paraview
 python3
 python3-brian2
 python-brian2-doc
@@ -42,7 +42,6 @@ python3-neo
 # python-nineml-doc
 python3-PyLEMS
 python-PyLEMS-doc
-python3-steps
 smoldyn

 %end
--- a/fedora-container-base.ks
+++ b/fedora-container-base.ks
@@ -26,6 +26,11 @@ rm -rf /tmp/*
 # https://pagure.io/atomic-wg/issue/308
 printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf

+# https://bugzilla.redhat.com/show_bug.cgi?id=1576993
+systemctl disable dnf-makecache.timer
+
+#Mask mount units and getty service so that we don't get login prompt
+systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service

 # https://bugzilla.redhat.com/show_bug.cgi?id=1343138
 # Fix /run/lock breakage since it's not tmpfs in docker
@@ -39,6 +44,7 @@ printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
 #   [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
 #
 umount /run
+systemd-tmpfiles --prefix=/run/ --prefix=/var/run/ --create --boot || true
 rm /run/nologin # https://pagure.io/atomic-wg/issue/316

 # Final pruning
--- a/fedora-container-common.ks
+++ b/fedora-container-common.ks
@@ -38,6 +38,8 @@ rpm
 shadow-utils
 sssd-client
 util-linux
+# needed by Anaconda https://bugzilla.redhat.com/show_bug.cgi?id=1744115
+systemd
 -kernel
 -dosfstools
 -e2fsprogs
--- a/fedora-disk-base.ks
+++ b/fedora-disk-base.ks
@@ -13,7 +13,7 @@ keyboard us
 timezone US/Eastern
 selinux --enforcing
 firewall --enabled --service=mdns
-services --enabled=sshd,NetworkManager,chronyd
+services --enabled=sshd,NetworkManager,chronyd,zram-swap
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -32,6 +32,7 @@ firstboot --reconfig
@core
@standard
@hardware-support
+zram

 kernel
 # remove this in %post
@@ -39,6 +40,7 @@ dracut-config-generic
 -dracut-config-rescue
 # install tools needed to manage and boot arm systems
@arm-tools
+-uboot-images-armv7
 rng-tools
 chrony
 bcm283x-firmware
@@ -49,32 +51,21 @@ initial-setup
 -usb_modeswitch
 -generic-release*

-# make sure all the locales are available for inital-setup and anaconda to work
+# make sure all the locales are available for inital0-setup and anaconda to work
 glibc-all-langpacks

 %end

 %post

-# Find the architecture we are on
-arch=$(uname -m)
-
 # Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
-if [[ $arch == "aarch64" ]]; then
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
-else
-cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
-cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
-cp -P /usr/share/uboot/rpi_4_32b/u-boot.bin /boot/efi/rpi4-u-boot.bin
-fi
-fi

 releasever=$(rpm --eval '%{fedora}')
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 echo "Packages within this disk image"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*

--- a/fedora-disk-minimal.ks
+++ b/fedora-disk-minimal.ks
@@ -1,7 +1,7 @@
 %include fedora-disk-base.ks
 %include fedora-minimal-common.ks

-services --enabled=sshd,NetworkManager,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap

 autopart --type=plain --noswap

--- a/fedora-disk-server.ks
+++ b/fedora-disk-server.ks
@@ -1,11 +1,10 @@
 %include fedora-disk-base.ks

-services --enabled=sshd,NetworkManager,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap

 autopart --noswap

 %packages
-fedora-release-server
 # install the default groups for the server environment since installing the environment is not working
@server-product
@standard
--- a/fedora-disk-workstation.ks
+++ b/fedora-disk-workstation.ks
@@ -4,9 +4,9 @@

 bootloader --append="cma=256MB"

-services --enabled=sshd,NetworkManager,chronyd
+services --enabled=sshd,NetworkManager,chronyd,zram-swap

-autopart --type=btrfs --noswap
+autopart --type=plain --noswap

 %packages
 -initial-setup
--- a/fedora-disk-xfce.ks
+++ b/fedora-disk-xfce.ks
@@ -4,9 +4,9 @@

 bootloader --append="cma=192MB"

-services --enabled=sshd,NetworkManager,chronyd
+services --enabled=sshd,NetworkManager,chronyd,zram-swap

-autopart --type=btrfs --noswap
+autopart --type=plain --noswap

 %packages

--- a/fedora-iot.ks
+++ b/fedora-iot.ks
@@ -11,7 +11,7 @@ rootpw --lock --iscrypted locked
 bootloader --timeout=1 --append="net.ifnames=0 modprobe.blacklist=vc4"

 network --bootproto=dhcp --device=link --activate --onboot=on
-services --enabled=NetworkManager,sshd,rngd
+services --enabled=NetworkManager,sshd,rngd,zram-swap

 zerombr
 clearpart --all --initlabel --disklabel=msdos
@@ -26,12 +26,9 @@ reboot
 %post --erroronfail
 # Find the architecture we are on
 arch=$(uname -m)
-if [[ $arch == "armv7l" ]]; then
-	arch="armhfp"
-fi

 # Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]] || [[ $arch == "armhfp" ]]; then
+if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
 if [[ $arch == "aarch64" ]]; then
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
@@ -84,7 +81,7 @@ rm -f /var/lib/systemd/random-seed

 echo "Packages within this iot image:"
 echo "-----------------------------------------------------------------------"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 echo "-----------------------------------------------------------------------"
 # Note that running rpm recreates the rpm db files which aren't needed/wanted
 rm -f /var/lib/rpm/__db*
--- a/fedora-live-astronomy_kde.ks
+++ b/fedora-live-astronomy_kde.ks
@@ -34,7 +34,9 @@ astrometry
 astrometry-tycho2
 cdsclient
 fpack
+gcx
 psfex
+saoimage
 scamp
 sextractor
 siril
@@ -52,7 +54,7 @@ indistarter
 kstars

 # misc. astronomy
-#celestia
+celestia
 stellarium
 virtualplanet

@@ -105,10 +107,6 @@ python3-matplotlib-tk
 # Python IDE very useful for scientific use
 python3-spyder

-# BOINC for distributed computing
-boinc-client
-boinc-manager
-
 #Version control- a GUI for each as well

 # Installing rapidsvn will also install subversion package
--- a/fedora-live-base.ks
+++ b/fedora-live-base.ks
@@ -52,10 +52,6 @@ anaconda
 anaconda-install-env-deps
 anaconda-live
@anaconda-tools
-# Anaconda has a weak dep on this and we don't want it on livecds, see
-# https://fedoraproject.org/wiki/Changes/RemoveDeviceMapperMultipathFromWorkstationLiveCD
-fcoe-utils
-device-mapper-multipath

 # Need aajohan-comfortaa-fonts for the SVG rnotes images
 aajohan-comfortaa-fonts
@@ -306,7 +302,7 @@ releasever=$(rpm --eval '%{fedora}')
 basearch=$(uname -i)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
 echo "Packages within this LiveCD"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*

--- a/fedora-live-comp_neuro.ks
+++ b/fedora-live-comp_neuro.ks
@@ -9,4 +9,4 @@
 %include fedora-comp-neuro-common.ks
 %include fedora-neuro-gnome-common.ks

-part / --size 10240
+part / --size 9656
--- a/fedora-live-design_suite.ks
+++ b/fedora-live-design_suite.ks
@@ -17,8 +17,8 @@ part / --size 14336
@design-suite

 # Provides backup application
-#deja-dup
-#deja-dup-nautilus
+deja-dup
+deja-dup-nautilus

 # Add extra gnome applications
 gnome-books
@@ -32,18 +32,17 @@ powerline
 powerline-fonts

 # Extra wallpapers
-f33-backgrounds-extras-gnome
+f32-backgrounds-extras-gnome

 # removal of unneeded applications
 -gnome-boxes
 -eog
 -rdesktop

-# temporarily removing conflicting applications
-blender-luxcorerender
+# temporarily removing conflicting application
 -mypaint
-shutter
 -sparkleshare
+-blender-luxcorerender

 %end

--- a/fedora-live-games.ks
+++ b/fedora-live-games.ks
@@ -91,7 +91,7 @@ glaxium
 gnubg
 gnugo
 haxima
-#hedgewars -- broken
+hedgewars
 kcheckers
 knights
 lbrickbuster2
@@ -140,7 +140,7 @@ wordwarvi
 xgalaxy
 # zasx # Would pull in fluid-soundfont-lite-patches

-# falling blocks games (small)
+# falling blocks games (small) 

 amoebax
 crack-attack
@@ -165,11 +165,13 @@ vodovod

 # card games

+#poker2d - dropped from F14 for being orphaned
 PySolFC

 # educational/simulation

-#celestia - not currently building
+bygfoot
+celestia
 planets
 tuxpaint
 tuxpaint-stamps
--- a/fedora-live-jam_kde.ks
+++ b/fedora-live-jam_kde.ks
@@ -37,7 +37,6 @@ nano

 # fedora jam theming (to be customized)
 fedora-jam-backgrounds
-fedora-jam-kde-theme

 #Misc. Utils
 screen
@@ -66,7 +65,7 @@ thunderbird
 #setup kickoff favorites
 /bin/mkdir -p /etc/skel/.config

-JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/mozilla-thunderbird.desktop,/usr/share/applications/studio-controls.desktop,/usr/share/applications/ardour6.desktop,/usr/share/applications/carla.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop
+JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/ardour5.desktop,/usr/share/applications/carla.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.kontact.desktop
 JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,$JAMFAVORITES

 cat <<EOF  >> /etc/skel/.config/kickoffrc
@@ -83,5 +82,3 @@ cat >> /etc/rc.d/init.d/livesys << EOF
 EOF

 %end
-
-
--- a/fedora-live-mate_compiz.ks
+++ b/fedora-live-mate_compiz.ks
@@ -7,7 +7,7 @@
 %include fedora-mate-common.ks
 %include fedora-live-minimization.ks

-part / --size 8192
+part / --size 7168

 %post
 cat >> /etc/rc.d/init.d/livesys << EOF
--- a/fedora-live-python-classroom.ks
+++ b/fedora-live-python-classroom.ks
@@ -8,4 +8,4 @@
 %include fedora-python-classroom-gnome-common.ks

 # https://bugzilla.redhat.com/show_bug.cgi?id=1695796
-part / --size 8192
+part / --size 7168
--- a/fedora-live-workstation.ks
+++ b/fedora-live-workstation.ks
@@ -56,7 +56,7 @@ if [ -f /usr/share/applications/liveinst.desktop ]; then

  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
 [org.gnome.shell]
-favorite-apps=['firefox.desktop', 'org.gnome.Calendar.desktop', 'rhythmbox.desktop', 'org.gnome.Photos.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
 FOE

  # Make the welcome screen show up
--- a/fedora-live-xfce.ks
+++ b/fedora-live-xfce.ks
@@ -13,9 +13,6 @@
 %include fedora-live-minimization.ks
 %include fedora-xfce-common.ks

-# need a bigger /
-part / --size 6144
-
 %post
 # xfce configuration

--- a/fedora-lxqt-common.ks
+++ b/fedora-lxqt-common.ks
@@ -38,7 +38,7 @@ wqy-microhei-fonts          # a compact CJK font, to replace:
 -adobe-source-han-sans-cn-fonts     # simplified Chinese
 -adobe-source-han-sans-tw-fonts     # traditional Chinese

-pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
+-paratype-pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
 #-stix-fonts        # mathematical symbols

 # remove input methods to free space
--- a/fedora-mate-common.ks
+++ b/fedora-mate-common.ks
@@ -1,5 +1,4 @@
 %packages
-fedora-release-matecompiz
@mate
 compiz
 compiz-plugins-main
@@ -16,6 +15,10 @@ emerald
 fusion-icon
@networkmanager-submodules

+# some apps from mate-applications
+caja-actions
+mate-disk-usage-analyzer
+
 # blacklist applications which breaks mate-desktop
 -audacious

@@ -35,11 +38,11 @@ nss-mdns
 -fedora-icon-theme
 -gnome-icon-theme
 -gnome-icon-theme-symbolic
-gnome-logs
 -gnome-software
 -gnome-user-docs

 -@mate-applications
+-mate-icon-theme-faenza

 # Help and art can be big, too
 -gnome-user-docs
--- a/fedora-modular-disk-minimal.ks
+++ b/fedora-modular-disk-minimal.ks
@@ -6,8 +6,7 @@ selinux --enforcing
 # Disabled for modular compose (for now)
 #firewall --enabled --service=mdns
 # Disabled for modular compose (for now)
-#services --enabled=sshd,chronyd,initial-setup
-services --enabled=NetworkManager
+#services --enabled=sshd,NetworkManager,chronyd,initial-setup
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -36,7 +35,7 @@ glibc-minimal-langpack
 grubby
 kernel
 sssd-client
-@networkmanager-submodules
+dhcp-client
 -fedora-logos
 -coreutils
 -dosfstools
@@ -54,25 +53,14 @@ sssd-client

 %post

-# Find the architecture we are on
-arch=$(uname -m)
-
 # Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
-if [[ $arch == "aarch64" ]]; then
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
-else
-cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
-cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
-cp -P /usr/share/uboot/rpi_4_32b/u-boot.bin /boot/efi/rpi4-u-boot.bin
-fi
-fi

 releasever=$(rpm --eval '%{fedora}')
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 echo "Packages within this disk image"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*

--- a/fedora-python-classroom-common.ks
+++ b/fedora-python-classroom-common.ks
@@ -21,15 +21,6 @@ wget
 -python35
 -python36
 -python37
-python38
-python2.7
-python3.5
-python3.6
-python3.7
-python3.8
 -pypy

-# Remove LaTeX, see https://bugzilla.redhat.com/show_bug.cgi?id=1862450
-texlive-latex
-
 %end
--- a/fedora-scientific-common.ks
+++ b/fedora-scientific-common.ks
@@ -4,9 +4,9 @@
@engineering-and-scientific

 # scilab
-## scilab
-## scilab-devel
-## scilab-doc
+scilab
+scilab-devel
+scilab-doc

 # Remove sagemath explicitly?
 -sagemath
@@ -128,8 +128,8 @@ dia
 inkscape
 xzgv
 gimp
-## ggobi
-## ggobi-devel
+ggobi
+ggobi-devel
 #g3data
 #Mayavi

--- a/fedora-soas-common.ks
+++ b/fedora-soas-common.ks
@@ -11,7 +11,6 @@ firewall --enabled --service=mdns,presence
 %packages

 # == Core Sugar Platform ==
-fedora-release-soas
@sugar-desktop

 # explicitly remove a bunch of extra stuff
@@ -39,10 +38,6 @@ fedora-release-soas
 -hyperv-daemons
 -sane-backends
 -sane-backends-drivers-scanners
-chkconfig
-dhcp-client
-gcc-gdb-plugin
-gcc

 # Add some extra fonts
 dejavu-sans-fonts
--- a/fedora-xfce-common.ks
+++ b/fedora-xfce-common.ks
@@ -12,7 +12,6 @@

 %packages

-fedora-release-xfce
@networkmanager-submodules
@xfce-desktop
@xfce-apps
@@ -20,12 +19,16 @@ fedora-release-xfce
@xfce-media
@xfce-office

+# unlock default keyring. FIXME: Should probably be done in comps
+gnome-keyring-pam
 # Admin tools are handy to have
@admin-tools
 # Add some screensavers, people seem to like them
 # Note that blank is still default.
 xscreensaver-extras
 wget
+# Better more popular browser
+#firefox
 system-config-printer

 # save some space
--- a/maintainers.toml
+++ b/maintainers.toml
@@ -59,10 +59,6 @@ maintainers = [ "Darryl T. Agostinelli" ]
 fas = [ "eeickmeyer" ]
 maintainers = [ "Erich Eickmeyer" ]

-[labs.python_classroom.x86_64]
-fas = [ "churchyard", "python-sig" ]
-maintainers = [ "Miro Hrončok", "Python SIG" ]
-
 [labs.scientific_kde.x86_64]
 fas = [ "scitech" ]
 maintainers = [ "SciTech SIG" ]
--- a/tools/nightly-composes
+++ b/tools/nightly-composes
@@ -0,0 +1,159 @@
+#!/bin/bash
+
+TOPDIR=/var/tmp
+
+STATEFILE=$TOPDIR/nightlylivecdstatefile
+# WARNING: MirrorManager must always give this mirror to the host running this script
+STATEPATH=http://infrastructure.fedoraproject.org/pub/fedora/linux/development/13/x86_64/os/repodata/repomd.xml
+
+getdatehash() {
+     DUMP=$(wget --no-cache -S $1 -O /dev/null 2>&1)
+     echo "$DUMP" | grep -q "HTTP/1.1 200 OK"
+     if [ $? -eq 0 ]; then
+         DATE=$(echo "$DUMP"|grep '^  Last-Modified'|sha1sum |awk {'print $1'})
+     else
+         echo "ERROR: $STATEPATH failed."
+         exit 1
+     fi
+}
+getdatehash $STATEPATH
+
+if [ -f $STATEFILE ]; then
+     OLDDATE=$(cat $STATEFILE)
+     if [ "$OLDDATE" == "$DATE" ]; then
+         # No change, exit
+         exit 0
+     fi
+fi
+
+# Save date hash
+echo "$DATE" > $STATEFILE
+echo "Saving date hash: $DATE"
+
+# Check for running livecd-creator and abort if it is running
+if ps -ef |grep -v grep |grep -q livecd-creator; then
+     echo "ERROR: Another livecd-creator is still running.  Aborting."
+     exit 255
+fi
+
+if [ ! -d $TOPDIR/spin-kickstarts/ ]; then
+     cd $TOPDIR
+     git clone http://git.fedorahosted.org/git/spin-kickstarts.git
+fi
+
+# pull any git updates to kickstarts
+
+cd $TOPDIR/spin-kickstarts/
+git reset --hard
+git pull
+
+if [ ! -d $TOPDIR/nightly-composes ]; then
+	mkdir -p $TOPDIR/nightly-composes
+fi
+
+DATE=`date +%Y%m%d.%H`
+
+# remove the previous days compose
+find $TOPDIR/nightly-composes/ -name '*.iso' -exec rm -f '{}' \;
+
+# loop though the valid spins
+for i in `echo desktop design-suite xfce broffice.org kde electronic-lab games lxde soas security`
+do
+
+   cd $TOPDIR/nightly-composes/
+
+   echo $i
+
+   if [ ! -d $TOPDIR/nightly-composes/$i ]; then
+  	mkdir -p $TOPDIR/nightly-composes/$i
+   fi
+   if [ ! -d $TOPDIR/nightly-composes/$i/logs ]; then
+  	mkdir -p $TOPDIR/nightly-composes/$i/logs
+	touch $TOPDIR/nightly-composes/$i/logs/SIZEHISTORY-i386
+	touch $TOPDIR/nightly-composes/$i/logs/SIZEHISTORY-x86_64
+   fi
+
+   cd $i
+
+   # compose f13 not rawhide for now.
+   sed -i 's/rawhide/fedora-13/g' $TOPDIR/spin-kickstarts/*.ks
+
+   # debrand
+   # Note this is not needed for 'official' test spins
+   #sed -i 's/^-fedora-logos/fedora-logos/' $TOPDIR/spin-kickstarts/fedora-livecd-$i.ks
+   #sed -i 's/^generic-logos//' $TOPDIR/spin-kickstarts/fedora-livecd-$i.ks
+
+   echo "INFO: $i i386 live image compose starting"
+   setarch i386 livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f $i-i386-$DATE > logs/$DATE-i386.log 2>&1
+   if [ $? -ne 0 ]; then
+        echo "ERROR: $i i386 live image failed to compose on $DATE"
+	mv logs/$DATE-i386.log logs/$DATE-FAILED-i386.log
+   else
+        du $TOPDIR/nightly-composes/$i/$i-i386-$DATE.iso >> logs/SIZEHISTORY-i386
+        tail -2 logs/SIZEHISTORY-i386
+	rm -f CHECKSUM-i386
+	sha256sum $i-i386-$DATE.iso > CHECKSUM-i386
+        cat CHECKSUM-i386
+        echo "INFO: $i i386 live image compose finished OK"
+   fi
+
+   echo "INFO: $i x86_64 live image compose starting"
+   # Need to shorten the electronic-lab label to the 32 char limit
+   if [ "$i" = "electronic-lab" ]; then
+	livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f e-lab-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
+   else
+   	livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f $i-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
+   fi
+   if [ $? -ne 0 ]; then
+        echo "ERROR: $i x86_64 live image failed to compose on $DATE"
+	mv logs/$DATE-x86_64.log logs/$DATE-FAILED-x86_64.log
+   else
+        if [ "$i" = "electronic-lab" ]; then
+             du $TOPDIR/nightly-composes/$i/e-lab-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
+             tail -2 logs/SIZEHISTORY-x86_64
+	     rm -f CHECKSUM-x86_64
+	     sha256sum e-lab-x86_64-$DATE.iso > CHECKSUM-x86_64
+             cat CHECKSUM-x86_64
+        else
+             du $TOPDIR/nightly-composes/$i/$i-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
+             tail -2 logs/SIZEHISTORY-x86_64
+	     rm -f CHECKSUM-x86_64
+	     sha256sum $i-x86_64-$DATE.iso > CHECKSUM-x86_64
+             cat CHECKSUM-x86_64
+        fi
+        echo "INFO: $i x86_64 live image compose finished OK"
+   fi
+
+   # remove old resize image
+   #rm -f /tmp/resize-image-*
+done
+
+# do aos spin
+echo "INFO: aos i386 live image compose starting"
+cd $TOPDIR/nightly-composes/aos/
+setarch i386 livecd-creator -c $TOPDIR/spin-kickstarts/fedora-aos.ks -f aos-i386-$DATE > logs/$DATE-i386.log 2>&1
+if [ $? -ne 0 ]; then
+        echo "ERROR: aos i386 live image failed to compose on $DATE"
+	mv logs/$DATE-i386.log logs/$DATE-FAILED-i386.log
+else
+        du $TOPDIR/nightly-composes/aos/aos-i386-$DATE.iso >> logs/SIZEHISTORY-i386
+        tail -2 logs/SIZEHISTORY-i386
+	rm -f CHECKSUM-i386
+	sha256sum aos-i386-$DATE.iso > CHECKSUM-i386
+	cat CHECKSUM-i386
+        echo "INFO: aos i386 live image compose finished OK"
+fi
+
+echo "INFO: aos x86_64 live image compose starting"
+livecd-creator -c $TOPDIR/spin-kickstarts/fedora-aos.ks -f aos-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
+if [ $? -ne 0 ]; then
+        echo "ERROR: aos x86_64 live image failed to compose on $DATE"
+	mv logs/$DATE-x86_64.log logs/$DATE-FAILED-x86_64.log
+else
+        du $TOPDIR/nightly-composes/aos/aos-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
+        tail -2 logs/SIZEHISTORY-x86_64 
+	rm -f CHECKSUM-x86_64
+	sha256sum aos-x86_64-$DATE.iso > CHECKSUM-x86_64
+        cat CHECKSUM-x86_64
+        echo "INFO: aos x86_64 live image compose finished OK"
+fi
Author	SHA1	Message	Date
Adam Williamson	13aac55e29	Bump KDE live root partition size to 7G This is needed for current F32, 6.5G is too small. The live image creation hangs near the end. Just noticed this after enabling KDE live image build test for F32 updates. Signed-off-by: Adam Williamson <awilliam@redhat.com>	2021-04-26 15:33:39 -07:00
Randy Barlow	4367531844	Revert "remove systemd package from fedora-container-base" This reverts commit `57e13a1b89`. I noticed that systemd-logind was causing problems in our containers after a container rebuild of the f32 base image was published about 5 days ago. I found that an issue[0] had been filed about the problem, but that bug was reported against Rawhide (f33). I then found that systemd had been removed from the f32 base image after f32 was released. This causes problems for users who expect stability out of Fedora releases - changing the default package set means that a container build that works one day can break the next. In our case, the problem wasn't so much that systemd was removed, but that the unit masks were removed. This causes some components of systemd to be unable to function in a container, and puts a burden on users to identify the problem. https://pagure.io/releng/issue/9603 [0] https://bugzilla.redhat.com/show_bug.cgi?id=1841139	2020-07-14 12:01:17 -04:00
siddharthvipul	57e13a1b89	remove systemd package from fedora-container-base Signed-off-by: siddharthvipul <siddharthvipul1@gmail.com>	2020-05-31 17:17:00 +05:30
Ankur Sinha (Ankur Sinha Gmail)	75e662166f	Update scitech maintainers Please note that according to [1] @lgmducazu were taking this up. When they do get in touch, we can add them to the list also. [1] https://pagure.io/fedora-project-schedule/issue/168	2020-05-02 16:39:02 +00:00
Peter Robinson	01ea5ed713	IoT: Update F-32 for stable ostree branch Signed-off-by: Peter Robinson <pbrobinson@fedoraproject.org>	2020-04-28 11:32:37 +01:00
Mohan Boddu	03f698ae62	Changing design_suite backgrounds to f32 Signed-off-by: Mohan Boddu <mboddu@bhujji.com>	2020-04-22 14:53:05 -04:00
Dan Book	11942989f5	Cinnamon - update extra backgrounds to f32 package	2020-04-19 14:56:31 -04:00
Erich Eickmeyer	92d368049e	Update fedora-live-jam_kde.ks Remove non-* tools from default session (functionality exists in other packages)	2020-04-03 22:56:06 +00:00
Erich Eickmeyer	b372f0f155	Have Fedora Jam ks use Audio Production group	2020-04-02 17:22:03 -07:00
Mohan Boddu	76084d6f18	Adding maintainers.toml to f32 Signed-off-by: Mohan Boddu <mboddu@bhujji.com>	2020-03-28 16:43:13 -04:00
Luya Tshimbalanga	fb0dec3af9	Temporarily remove conflicting blender-luxcorerender	2020-03-28 10:37:36 -07:00
Erich Eickmeyer	62f38a1c32	Add pipewire Adds pipewire to disk	2020-03-06 20:39:42 +00:00
Erich Eickmeyer	1fa40d115e	Update fedora-live-jam_kde.ks Add jackctlmmc, removed packages not packaged or likely to be packaged	2020-03-06 20:39:42 +00:00
Peter Robinson	b892b8939c	IoT: setup ostree from f32/devel branched Signed-off-by: Peter Robinson <pbrobinson@fedoraproject.org>	2020-02-19 09:17:55 +00:00
Erich Eickmeyer	449b3efc0e	Update fedora-live-jam_kde.ks - Update favorites, old KDE4 stuff You read that right... stuff in there from before Plasma 5	2020-02-19 00:36:46 +00:00
Peter Robinson	d1e8a6668b	SoAS: add defaults to sugar package, move a bunch of package selection to comps group Signed-off-by: Peter Robinson <pbrobinson@fedoraproject.org>	2020-02-19 00:02:09 +00:00
Erich Eickmeyer	4860ea2def	Update fedora-live-jam_kde.ks Fix capitalization on Carla package, add its lv2 plugin	2020-02-12 23:37:48 +00:00
Mohan Boddu	ad9357f785	Branching F32 from rawhide Signed-off-by: Mohan Boddu <mboddu@bhujji.com>	2020-02-11 09:23:17 -05:00