astronomy: removed python3-healpy (not available ob i686, pulled in as a weak dep of python3-reproject on x86_64)

While booting Atomic cloudImage, we want to see kernel messages
on both VGA and serial console. It works fine with
tty1(vga console) and ttyS0(serial console) on x86_64 arch.
But, aarch64 and ppc64le doesn't use ttyS0 as serial console.
Instead, they use ttyAMA0(aarch64) and hvc0 (ppc64le).

Also, good point is that if a serial console specified in kernel
boot parameter is not supported on a given hardware platform, it
gets ignored. For example: console=ttyAMA0 and console=hvc0 will
get ignored on x86_64

Fixes: https://pagure.io/atomic-wg/issue/347

Signed-off-by: Sinny Kumari <sinny@redhat.com>

fedora-aos.ks

@@ -0,0 +1,102 @@
+# Kickstart file to build the appliance operating
+# system for fedora.
+# This is based on the work at http://www.thincrust.net
+lang C
+keyboard us
+timezone US/Eastern
+auth --useshadow --passalgo=sha512
+selinux --permissive
+firewall --disabled
+bootloader --timeout=1 --append="acpi=force"
+network --bootproto=dhcp --device=eth0 --onboot=on
+
+# Uncomment the next line
+# to make the root password be thincrust
+# By default the root password is emptied
+#rootpw --iscrypted $1$uw6MV$m6VtUWPed4SqgoW6fKfTZ/
+
+#
+# Partition Information. Change this as necessary
+# This information is used by appliance-tools but
+# not by the livecd tools.
+#
+part / --size 1024 --fstype ext4 --ondisk sda
+
+#
+# Repositories
+#
+%include fedora-repo.ks
+
+#
+# Add all the packages after the base packages
+#
+%packages --excludedocs --nobase
+bash
+kernel
+grub
+e2fsprogs
+passwd
+policycoreutils
+chkconfig
+rootfiles
+yum
+vim-minimal
+acpid
+#needed to disable selinux
+lokkit
+
+#Allow for dhcp access
+dhclient
+iputils
+
+#
+# Packages to Remove
+#
+
+# no need for kudzu if the hardware doesn't change
+-kudzu
+-prelink
+-setserial
+-ed
+
+# Remove the authconfig pieces
+-authconfig
+-rhpl
+-wireless-tools
+
+# Remove the kbd bits
+-kbd
+-usermode
+
+# these are all kind of overkill but get pulled in by mkinitrd ordering
+-mkinitrd
+-kpartx
+-dmraid
+-mdadm
+-lvm2
+-tar
+
+# selinux toolchain of policycoreutils, libsemanage, ustr
+-policycoreutils
+-checkpolicy
+-selinux-policy*
+-libselinux-python
+-libselinux
+
+# Things it would be nice to loose
+-fedora-logos
+generic-logos
+-fedora-release-notes
+%end
+
+#
+# Add custom post scripts after the base post.
+#
+%post
+
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+%end
+

fedora-arm-base.ks

@@ -4,16 +4,18 @@ auth --useshadow --passalgo=sha512
 selinux --enforcing
 firewall --enabled --service=mdns,ssh
 
-bootloader --location=mbr
+# configure extlinux bootloader
+bootloader extlinux
 
-part /boot/efi --size=80 --fstype vfat --asprimary
+part /boot/fw --size=30 --fstype vfat --asprimary
 part /boot --size=512 --fstype ext4 --asprimary
+part swap --size=512 --fstype swap --asprimary
 part / --size=2800 --fstype ext4 --asprimary
 
 # make sure that initial-setup runs and lets us do all the configuration bits
 firstboot --reconfig
 
-services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup,zram-swap
+services --enabled=sshd,NetworkManager,avahi-daemon,rsyslog,chronyd,initial-setup
 
 %include fedora-repo.ks
 
@@ -21,7 +23,6 @@ services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup,zram-s
 @core
 @standard
 @hardware-support
-zram
 
 kernel
 # remove this in %post
@@ -38,20 +39,31 @@ initial-setup
 initial-setup-gui
 -iwl*
 -ipw*
+-trousers-lib
 -usb_modeswitch
+-iproute-tc
 #lets resize / on first boot
 # dracut-modules-growroot
 
 # make sure all the locales are available for inital0-setup and anaconda to work
 glibc-all-langpacks
 
+# workaround for consequence of RHBZ #1324623: without this, with
+# yum-based creation tools, compose fails due to conflict between
+# libcrypt and libcrypt-nss. dnf does not seem to have the same
+# issue, so this may be dropped when appliance-creator is ported
+# to dnf.
+libcrypt-nss
+-libcrypt
 %end
 
 %post
 
 # Setup Raspberry Pi firmware
-cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
-cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
+cp -Pr /usr/share/bcm283x-firmware/* /boot/fw/
+cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/fw/rpi2-u-boot.bin
+cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/fw/rpi3-u-boot.bin
+sed -i '/vfat/ d' /etc/fstab
 
 # work around for poor key import UI in PackageKit
 rm -f /var/lib/rpm/__db*

fedora-arm-kde.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-kde-common.ks
 
-part / --size=6300 --fstype ext4
+part / --size=5690 --fstype ext4
 
 %post
 

fedora-arm-lxde.ks

@@ -2,8 +2,6 @@
 %include fedora-arm-xbase.ks
 %include fedora-lxde-common.ks
 
-part / --size=4000 --fstype ext4
-
 %post
 
 %end

fedora-arm-lxqt.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-lxqt-common.ks
 
-part / --size=4200 --fstype ext4 --asprimary
+part / --size=3800 --fstype ext4 --asprimary
 
 %packages
 # trojita not available on non-x86 platforms

fedora-arm-mate.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-mate-common.ks
 
-part / --size=6000 --fstype ext4
+part / --size=5500 --fstype ext4
 
 %post
 

fedora-arm-minimal.ks

@@ -2,6 +2,7 @@
 %include fedora-minimal-common.ks
 
 part /boot --size=512 --fstype ext4
+part swap --size=256 --fstype swap
 part / --size=1256 --fstype ext4
 
 %packages

fedora-arm-server.ks

@@ -4,13 +4,10 @@
 part / --size=2500 --fstype xfs
 
 %packages
-# install the default groups for the server environment since installing the environment is not working
+# install the default groups for the server evironment since installing the environment is not working
 @server-product
 @standard
 @headless-management
-@hardware-support
-@networkmanager-submodules
-
 @container-management
 @domain-client
 -initial-setup-gui

fedora-arm-workstation.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-workstation-common.ks
 
-part / --size=6200 --fstype ext4
+part / --size=5500 --fstype ext4
 
 %packages
 -initial-setup

fedora-arm-xfce.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-xfce-common.ks
 
-part / --size=4700 --fstype ext4
+part / --size=4500 --fstype ext4
 
 %post
 

fedora-atomic-testing-base.ks

@@ -1,27 +0,0 @@
-
-# ./fedora-atomic-testing-base.ks - for building media from the testing
-# refs (fedora/29/${basearch}/testing/atomic-host)
-
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/ostree/repo/ --ref=fedora/29/${basearch}/testing/atomic-host
-
-%post --erroronfail
-# Find the architecture we are on
-arch=$(uname -m)
-# Set the origin to the "main stable ref", distinct from /testing/ which is where bodhi writes.
-# We want consumers of this image to track the two week releases.
-ostree admin set-origin --index 0 fedora-atomic https://ostree.fedoraproject.org "fedora/29/${arch}/atomic-host"
-
-# Make sure the ref we're supposedly sitting on (according
-# to the updated origin) exists.
-ostree refs "fedora-atomic:fedora/29/${arch}/testing/atomic-host" --create "fedora-atomic:fedora/29/${arch}/atomic-host"
-
-# Remove the old ref so that the commit eventually gets
-# cleaned up.
-ostree refs "fedora-atomic:fedora/29/${arch}/testing/atomic-host" --delete
-
-# delete/add the remote with new options to enable gpg verification
-# and to point them at the cdn url
-ostree remote delete fedora-atomic
-ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-primary --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/mirrorlist fedora-atomic 'https://ostree.fedoraproject.org'
-
-%end

fedora-atomic-testing.ks

@@ -1,6 +0,0 @@
-
-# ./fedora-atomic-testing.ks - for building base cloud media 
-# from the testing refs (fedora/29/${basearch}/testing/atomic-host)
-
-%include fedora-atomic.ks
-%include fedora-atomic-testing-base.ks

fedora-atomic-updates-base.ks

@@ -1,27 +0,0 @@
-
-# ./fedora-atomic-updates-base.ks - for building media from the updates
-# refs (fedora/29/${basearch}/updates/atomic-host)
-
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/ostree/repo/ --ref=fedora/29/${basearch}/updates/atomic-host
-
-%post --erroronfail
-# Find the architecture we are on
-arch=$(uname -m)
-# Set the origin to the "main stable ref", distinct from /updates/ which is where bodhi writes.
-# We want consumers of this image to track the two week releases.
-ostree admin set-origin --index 0 fedora-atomic https://ostree.fedoraproject.org "fedora/29/${arch}/atomic-host"
-
-# Make sure the ref we're supposedly sitting on (according
-# to the updated origin) exists.
-ostree refs "fedora-atomic:fedora/29/${arch}/updates/atomic-host" --create "fedora-atomic:fedora/29/${arch}/atomic-host"
-
-# Remove the old ref so that the commit eventually gets
-# cleaned up.
-ostree refs "fedora-atomic:fedora/29/${arch}/updates/atomic-host" --delete
-
-# delete/add the remote with new options to enable gpg verification
-# and to point them at the cdn url
-ostree remote delete fedora-atomic
-ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-primary --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/mirrorlist fedora-atomic 'https://ostree.fedoraproject.org'
-
-%end

fedora-atomic-updates.ks

@@ -1,6 +0,0 @@
-
-# ./fedora-atomic-updates.ks - for building base cloud media 
-# from the updates refs (fedora/29/${basearch}/updates/atomic-host)
-
-%include fedora-atomic.ks
-%include fedora-atomic-updates-base.ks

fedora-atomic-vagrant-testing.ks

@@ -1,6 +0,0 @@
-
-# ./fedora-atomic-vagrant-testing.ks - for building media from the testing
-# refs (fedora/29/${basearch}/testing/atomic-host) for vagrant
-
-%include fedora-atomic-vagrant.ks
-%include fedora-atomic-testing-base.ks

fedora-atomic-vagrant-updates.ks

@@ -1,6 +0,0 @@
-
-# ./fedora-atomic-vagrant-updates.ks - for building media from the updates
-# refs (fedora/29/${basearch}/updates/atomic-host) for vagrant
-
-%include fedora-atomic-vagrant.ks
-%include fedora-atomic-updates-base.ks

fedora-atomic.ks

@@ -1,20 +1,10 @@
-# Fedora Atomic Host is the Fedora version of the "Atomic Host" pattern
-# from [Project Atomic](http://www.projectatomic.io/).
+# Fedora Atomic is a cloud-focused spin implementing the Project
+# Atomic patterns.  Note that this replicates the same tree which can
+# now be installed on bare metal.
 
-# This kickstart is used for cloud/virt images, and uses cloud-init
-# to bootstrap authentication, just like Fedora Cloud Base.  (Also note the
-# fedora-atomic-vagrant.ks kickstart inherits from this).
-
-# One very important thing to understand is that this image contains the same
-# OSTree commit as will be used on bare metal installations - Fedora Atomic Host
-# also has an ISO. One difference though is that cloud-init isn't enabled for
-# bare metal. When processing this kickstart then, Anaconda isn't actually
-# installing packages - it's just replicating a "pre-assembled" tree from
-# rpm-ostree.
-
-# Basically, the `ostreesetup` verb replaces the traditional `%packages`
-# section. For example, `rpm-ostree status` can show you the same checksum and
-# version from an ISO install and this cloud image - it's the same bits.
+# This image allocates most space to an LVM-managed thin pool
+# dedicated for Docker containers, and uses docker-storage-setup to
+# dynamically resize storage on boot.
 
 text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
 lang en_US.UTF-8
@@ -25,8 +15,6 @@ auth --useshadow --passalgo=sha512
 selinux --enforcing
 rootpw --lock --iscrypted locked
 
-# Explicitly disable firewall since cloud providers generally provide
-# higher level firewall constructs (i.e. security groups).
 firewall --disabled
 
 # console=ttyAMA0 and console=hvc0 as kernel boot parameter to see
@@ -41,8 +29,7 @@ services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
 zerombr
 clearpart --all
 # Implement: https://pagure.io/atomic-wg/issue/281
-# The bare metal layout currently inherits from fedora server and is in
-# https://github.com/rhinstaller/anaconda/blob/master/pyanaconda/installclasses/fedora_atomic_host.py
+# The bare metal layout default is in http://pkgs.fedoraproject.org/cgit/rpms/fedora-productimg-atomic.git
 # However, the disk size is currently just 6GB for the cloud image (defined in pungi-fedora).  So the
 # "15GB, rest unallocated" model doesn't make sense.  The Vagrant box is 40GB (apparently a number of
 # Vagrant boxes come big and rely on thin provisioning).
@@ -58,7 +45,7 @@ logvol / --size=3000 --grow --fstype="xfs" --name=root --vgname=atomicos
 
 # Equivalent of %include fedora-repo.ks
 # Pull from the ostree repo that was created during the compose
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/ostree/repo/ --ref=fedora/29/${basearch}/atomic-host
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/atomic/27/ --ref=fedora/27/${basearch}/atomic-host
 
 reboot
 
@@ -68,7 +55,7 @@ reboot
 # This location is where the compose gets synced to after the compose
 # is done.
 ostree remote delete fedora-atomic
-ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-primary --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/mirrorlist fedora-atomic 'https://ostree.fedoraproject.org'
+ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-27-primary fedora-atomic 'https://kojipkgs.fedoraproject.org/atomic/27/'
 
 # older versions of livecd-tools do not follow "rootpw --lock" line above
 # https://bugzilla.redhat.com/show_bug.cgi?id=964299
@@ -97,9 +84,12 @@ NETWORKING=yes
 NOZEROCONF=yes
 EOF
 
-# Remove any persistent NIC rules generated by udev
-rm -vf /etc/udev/rules.d/*persistent-net*.rules
-# And ensure that we will do DHCP on eth0 on startup
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
 cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
 DEVICE="eth0"
 BOOTPROTO="dhcp"
@@ -108,12 +98,24 @@ TYPE="Ethernet"
 PERSISTENT_DHCLIENT="yes"
 EOF
 
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
 # Because memory is scarce resource in most cloud/virt environments,
 # and because this impedes forensics, we are differing from the Fedora
 # default of having /tmp on tmpfs.
 echo "Disabling tmpfs for /tmp."
 systemctl mask tmp.mount
 
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
 # Uncomment this if you want to use cloud init but suppress the creation
 # of an "ec2-user" account. This will, in the absence of further config,
 # cause the ssh key from a metadata source to be put in the root account.

fedora-cinnamon-common.ks

@@ -11,9 +11,17 @@
 @networkmanager-submodules
 @cinnamon-desktop
 @libreoffice
-parole
+
+# internet and multimedia
+pidgin
+hexchat
+transmission
+
+# mp3 support
+gstreamer1-plugins-ugly-free
 
 # extra backgrounds
-f29-backgrounds-extras-gnome
+desktop-backgrounds-basic
+f26-backgrounds-extras-gnome
 
 %end

fedora-cloud-base-vagrant.ks

@@ -32,8 +32,6 @@ dnf-yum
 # users setup. This can actually take a bit of time.  Just fold it
 # in to the base box disk image
 rsync
-# Add in sshfs for vagrant-sshfs plugin
-fuse-sshfs
 %end
 
 %post --erroronfail

fedora-cloud-base.ks

@@ -15,9 +15,9 @@
 # For a TDL file, I store one here:
 # https://pagure.io/fedora-atomic/raw/master/f/fedora-atomic-rawhide.tdl
 # (Koji generates one internally...what we really want is Koji to publish it statically)
-#
+# 
 # Once you have imagefactory and imagefactory-plugins installed, run:
-#
+# 
 #   curl -O https://pagure.io/fedora-atomic/raw/master/f/fedora-atomic-rawhide.tdl
 #   tempfile=$(mktemp --suffix=.ks)
 #   ksflatten -v F22 -c fedora-cloud-base.ks > ${tempfile}
@@ -35,8 +35,7 @@ rootpw --lock --iscrypted locked
 
 firewall --disabled
 
-# We pass net.ifnames=0 because we always want to use eth0 here on all the cloud images.
-bootloader --timeout=1 --append="no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
 
 network --bootproto=dhcp --device=link --activate --onboot=on
 services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
@@ -75,6 +74,7 @@ which
 # Need to also add back plymouth in order to mask failure of
 # systemd-vconsole-setup.service. BZ#1272684. Comment out for now
 #-plymouth
+-NetworkManager
 -iprutils
 # Now that BZ#1199868 is fixed kbd really gets removed but it breaks
 # systemd-vconsole-setup.service on boot. Comment out for now
@@ -170,6 +170,11 @@ NOZEROCONF=yes
 DEVTIMEOUT=10
 EOF
 
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
 # simple eth0 config, again not hard-coded to the build hardware
 cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
 DEVICE="eth0"
@@ -240,12 +245,8 @@ dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
 rm -f /var/tmp/zeros
 echo "(Don't worry -- that out-of-space error was expected.)"
 
-# When we build the image with oz, dracut is used
-# and sets up a ifcfg-en<whatever> for the device. We don't
-# want to use this, we use eth0 so it is always the same.
-# So we remove all these ifcfg-en<whatever> devices so
-# The 'network' service can come up cleanly.
-rm -f /etc/sysconfig/network-scripts/ifcfg-en*
+# For trac ticket https://fedorahosted.org/cloud/ticket/128
+rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
 
 # Enable network service here, as doing it in the services line
 # fails due to RHBZ #1369794

fedora-disk-base.ks

@@ -14,7 +14,7 @@ timezone US/Eastern
 auth --useshadow --passalgo=sha512
 selinux --enforcing
 firewall --enabled --service=mdns
-services --enabled=sshd,NetworkManager,chronyd,zram-swap
+services --enabled=sshd,NetworkManager,chronyd
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -33,7 +33,6 @@ firstboot --reconfig
 @core
 @standard
 @hardware-support
-zram
 
 kernel
 # remove this in %post
@@ -46,20 +45,30 @@ rng-tools
 chrony
 bcm283x-firmware
 initial-setup
-# Intel wireless firmware assumed never of use for disk images
 -iwl*
 -ipw*
+-trousers-lib
 -usb_modeswitch
+-iproute-tc
 -generic-release*
 
 # make sure all the locales are available for inital0-setup and anaconda to work
 glibc-all-langpacks
 
+# workaround for consequence of RHBZ #1324623: without this, with
+# yum-based creation tools, compose fails due to conflict between
+# libcrypt and libcrypt-nss. dnf does not seem to have the same
+# issue, so this may be dropped when appliance-creator is ported
+# to dnf.
+libcrypt-nss
+-libcrypt
 %end
 
 %post
 
 # Setup Raspberry Pi firmware
+cp -Pr /usr/share/bcm283x-firmware/* /boot/efi/
+mv -f /boot/efi/config-64.txt /boot/efi/config.txt
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 
 releasever=$(rpm -q --qf '%{version}\n' fedora-release)
@@ -72,9 +81,6 @@ rm -f /var/lib/rpm/__db*
 # remove random seed, the newly installed instance should make it's own
 rm -f /var/lib/systemd/random-seed
 
-# The enp1s0 interface is a left over from the imagefactory install, clean this up
-rm -f /etc/sysconfig/network-scripts/ifcfg-enp1s0
-
 dnf -y remove dracut-config-generic
 
 # Disable network service here, as doing it in the services line

fedora-disk-minimal.ks

@@ -1,9 +1,9 @@
 %include fedora-disk-base.ks
 %include fedora-minimal-common.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
+services --enabled=sshd,NetworkManager,chronyd,initial-setup
 
-autopart --type=plain --noswap
+autopart --type=plain
 
 %packages
 -xkeyboard-config

fedora-disk-server.ks

@@ -1,17 +1,14 @@
 %include fedora-disk-base.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
+services --enabled=sshd,NetworkManager,chronyd,initial-setup
 
-autopart --noswap
+autopart
 
 %packages
-# install the default groups for the server environment since installing the environment is not working
+# install the default groups for the server evironment since installing the environment is not working
 @server-product
 @standard
 @headless-management
-@hardware-support
-@networkmanager-submodules
-
 @container-management
 @domain-client
 -initial-setup-gui

fedora-disk-workstation.ks

@@ -4,9 +4,9 @@
 
 bootloader --append="cma=256MB"
 
-services --enabled=sshd,NetworkManager,chronyd,zram-swap
+services --enabled=sshd,NetworkManager,chronyd
 
-autopart --type=plain --noswap
+autopart --type=plain
 
 %packages
 -initial-setup

fedora-docker-base.ks

@@ -5,14 +5,12 @@
 
 %packages --excludedocs --instLangs=en --nocore
 rootfiles
-# https://communityblog.fedoraproject.org/modularity-dead-long-live-modularity/
-fedora-repos-modular
 tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
 vim-minimal
 dnf
 dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
 sssd-client
-sudo
+
 %end
 
 %post --erroronfail --log=/root/anaconda-post.log
@@ -23,9 +21,6 @@ rm -rf /tmp/*
 # https://pagure.io/atomic-wg/issue/308
 printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
 
-# https://bugzilla.redhat.com/show_bug.cgi?id=1576993
-systemctl disable dnf-makecache.timer
-
 #Mask mount units and getty service so that we don't get login prompt
 systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service
 

fedora-docker-common.ks

@@ -30,26 +30,19 @@ clearpart --all
 autopart --noboot --nohome --noswap --nolvm
 
 %packages --excludedocs --instLangs=en --nocore
-fedora-release-container
+fedora-release
 bash
-coreutils
-glibc-minimal-langpack
-libcrypt
-rpm
-shadow-utils
-sssd-client
-util-linux
 -kernel
 -dosfstools
 -e2fsprogs
 -fuse-libs
 -gnupg2-smime
 -libss # used by e2fsprogs
+-libusbx
 -pinentry
 -shared-mime-info
 -trousers
 -xkeyboard-config
--grubby
 
 %end
 
@@ -63,7 +56,7 @@ echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf
 
 # https://bugzilla.redhat.com/show_bug.cgi?id=1400682
 echo "Import RPM GPG key"
-releasever=$(rpm -q --qf '%{version}\n' fedora-release-container)
+releasever=$(rpm -q --qf '%{version}\n' fedora-release)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 
 echo "# fstab intentionally empty for containers" > /etc/fstab

fedora-iot.ks

@@ -1,117 +0,0 @@
-# This is the kickstart for Fedora IoT disk images.
-
-text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
-lang en_US.UTF-8
-keyboard us
-timezone --utc Etc/UTC
-
-auth --useshadow --passalgo=sha512
-selinux --enforcing
-rootpw --lock --iscrypted locked
-
-# Add most common consoles console=ttyAMA0 console=ttyS0 console=ttyS1 as kernel boot parameter
-bootloader --timeout=1 --append="net.ifnames=0 modprobe.blacklist=vc4"
-
-network --bootproto=dhcp --device=link --activate --onboot=on
-services --enabled=NetworkManager,sshd,rngd,initial-setup,zram-swap
-
-# tell Initial Setup to run in the reconfig mode
-firstboot --reconfig --enable
-
-zerombr
-clearpart --all --initlabel --disklabel=msdos
-autopart --nohome --noswap --type=plain
-
-# Equivalent of %include fedora-repo.ks
-# Pull from the ostree repo that was created during the compose
-ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/stable/${basearch}/iot
-
-reboot
-
-%post --erroronfail
-# Find the architecture we are on
-arch=$(uname -m)
-
-# Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
-if [[ $arch == "aarch64" ]]; then
-cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
-else
-cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/fw/rpi2-u-boot.bin
-cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/fw/rpi3-u-boot.bin
-fi
-fi
-
-# Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.
-# We want consumers of this image to track the two week releases.
-ostree admin set-origin --index 0 fedora-iot https://dl.fedoraproject.org/iot/repo/ "fedora/stable/${arch}/iot"
-
-# Make sure the ref we're supposedly sitting on (according
-# to the updated origin) exists.
-ostree refs "fedora-iot:fedora/stable/${arch}/iot" --create "fedora-iot:fedora/stable/${arch}/iot"
-
-# Remove the old ref so that the commit eventually gets cleaned up.
-ostree refs "fedora-iot:fedora/stable/${arch}/iot" --delete
-
-# delete/add the remote with new options to enable gpg verification
-# and to point them at the cdn url
-ostree remote delete fedora-iot
-ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-iot-2019 --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/iot/mirrorlist  fedora-iot 'https://ostree.fedoraproject.org/iot'
-
-# We're gettin a stray console= from somewhere, work around it
-rpm-ostree kargs --delete=console=tty0
-
-# older versions of livecd-tools do not follow "rootpw --lock" line above
-# https://bugzilla.redhat.com/show_bug.cgi?id=964299
-passwd -l root
-
-# Work around https://bugzilla.redhat.com/show_bug.cgi?id=1193590
-cp /etc/skel/.bash* /var/roothome
-
-echo -n "Network fixes"
-# initscripts don't like this file to be missing.
-cat > /etc/sysconfig/network << EOF
-NETWORKING=yes
-NOZEROCONF=yes
-EOF
-
-# Remove any persistent NIC rules generated by udev
-rm -vf /etc/udev/rules.d/*persistent-net*.rules
-# And ensure that we will do DHCP on eth0 on startup
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-
-echo "Removing random-seed so it's not the same in every image."
-rm -f /var/lib/systemd/random-seed
-
-echo "Packages within this iot image:"
-echo "-----------------------------------------------------------------------"
-rpm -qa
-echo "-----------------------------------------------------------------------"
-# Note that running rpm recreates the rpm db files which aren't needed/wanted
-rm -f /var/lib/rpm/__db*
-
-echo "Zeroing out empty space."
-# This forces the filesystem to reclaim space from deleted files
-dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
-rm -f /var/tmp/zeros
-echo "(Don't worry -- that out-of-space error was expected.)"
-
-# For trac ticket https://pagure.io/atomic-wg/issue/128
-rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
-
-echo "Adding Developer Mode GRUB2 menu item."
-/usr/libexec/atomic-devmode/bootentry add
-
-# Anaconda is writing an /etc/resolv.conf from the install environment.
-# The system should start out with an empty file, otherwise cloud-init
-# will try to use this information and may error:
-# https://bugs.launchpad.net/cloud-init/+bug/1670052
-truncate -s 0 /etc/resolv.conf
-
-%end

fedora-kde-common.ks

@@ -1,16 +1,16 @@
-
 %packages
 @firefox
 @kde-apps
 @kde-desktop
 @kde-media
 @kde-office
+@kde-telepathy
 @networkmanager-submodules
 
 ### The KDE-Desktop
 
 ### Browser
-falkon
+qupzilla
 
 ### fixes
 
@@ -18,7 +18,7 @@ falkon
 -system-config-printer
 # make sure mariadb lands instead of MySQL (hopefully a temporary hack)
 mariadb-embedded
-mariadb-connector-c
+mariadb-libs
 mariadb-server
 
 # minimal localization support - allows installing the kde-l10n-* packages
@@ -44,6 +44,23 @@ mediawriter
 
 ### space issues
 
+# fonts (we make no bones about admitting we're english-only)
+wqy-microhei-fonts			# a compact CJK font, to replace:
+-naver-nanum-gothic-fonts		# Korean
+-vlgothic-fonts				# Japanese
+-adobe-source-han-sans-cn-fonts		# simplified Chinese
+-adobe-source-han-sans-tw-fonts 	# traditional Chinese
+
+-paratype-pt-sans-fonts	# Cyrillic (already supported by DejaVu), huge
+#-stix-fonts		# mathematical symbols
+
+# remove input methods to free space
+-@input-methods
+-scim*
+-m17n*
+-ibus*
+-iok
+
 # admin-tools
 -gnome-disk-utility
 # kcm_clock still lacks some features, so keep system-config-date around

fedora-kde-minimization.ks

@@ -1,8 +0,0 @@
-# remove input methods to free space
-%packages
--@input-methods
--scim*
--iok
-%end
-
-

fedora-live-astronomy_kde.ks

@@ -14,8 +14,7 @@
 # Maintainer: Christian Dersch <lupinix@fedoraproject.org>
 #             https://fedoraproject.org/wiki/User:Lupinix
 
-%include fedora-live-kde-base.ks
-%include fedora-live-minimization.ks
+%include fedora-live-kde.ks
 
 # The recommended part size for DVDs is too close to use for the astronomy spin
 part / --size 14500

fedora-live-base.ks

@@ -49,7 +49,6 @@ memtest86+
 
 # The point of a live image is to install
 anaconda
-anaconda-install-env-deps
 @anaconda-tools
 
 # Need aajohan-comfortaa-fonts for the SVG rnotes images
@@ -57,6 +56,7 @@ aajohan-comfortaa-fonts
 
 # Without this, initramfs generation during live image creation fails: #1242586
 dracut-live
+grub2-efi
 syslinux
 
 # anaconda needs the locales available to run for different locales
@@ -95,10 +95,11 @@ livedir="LiveOS"
 for arg in \`cat /proc/cmdline\` ; do
   if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
     livedir=\${arg##rd.live.dir=}
-    continue
+    return
   fi
   if [ "\${arg##live_dir=}" != "\${arg}" ]; then
     livedir=\${arg##live_dir=}
+    return
   fi
 done
 
@@ -153,6 +154,7 @@ findPersistentHome() {
   for arg in \`cat /proc/cmdline\` ; do
     if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
       homedev=\${arg##persistenthome=}
+      return
     fi
   done
 }
@@ -205,10 +207,6 @@ systemctl --no-reload disable atd.service 2> /dev/null || :
 systemctl stop crond.service 2> /dev/null || :
 systemctl stop atd.service 2> /dev/null || :
 
-# turn off abrtd on a live image
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
 # Don't sync the system clock when running live (RHBZ #1018162)
 sed -i 's/rtcsync//' /etc/chrony.conf
 
@@ -342,19 +340,8 @@ cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
 
 # only works on x86, x86_64
 if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+  if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+  cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
 fi
 
 %end

fedora-live-cinnamon.ks

@@ -7,6 +7,7 @@
 # - Dan Book <grinnz@grinnz.com>
 
 %include fedora-live-base.ks
+%include fedora-live-minimization.ks
 %include fedora-cinnamon-common.ks
 
 part / --size=6144

fedora-live-design_suite.ks

@@ -31,26 +31,23 @@ gnome-todo
 powerline
 powerline-fonts
 
+
 # Extra wallpapers
-f28-backgrounds-extras-base
-f28-backgrounds-extras-gnome
+f26-backgrounds-extras-base
+f26-backgrounds-extras-gnome
 
 # removal of unneeded applications
 -gnome-boxes
 -eog
 -rdesktop
 
-# temporarily removing conflicting application
--LuxRender-blender
--mypaint
-
 %end
 
 %post
 #Override the favorite desktop application in Dash
 cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
 [org.gnome.shell]
-favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'pitivi.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
+favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
 FOE
 
 # Add link to lists of tutorials

fedora-live-jam_kde.ks

@@ -77,7 +77,7 @@ sooperlooper
 
 #recodring and DAW
 audacity
-ardour5
+ardour4
 rosegarden4
 seq24
 muse

fedora-live-kde.ks

@@ -9,10 +9,9 @@
 
 %include fedora-live-kde-base.ks
 %include fedora-live-minimization.ks
-%include fedora-kde-minimization.ks
 
 # DVD payload
-part / --size=6500
+part / --size=6144
 
 %post
 %end

fedora-live-minimization.ks

@@ -5,8 +5,14 @@
 
 # save some space
 -mpage
+-sox
 -hplip
+-numactl
 -isdn4k-utils
+-autofs
+# smartcards won't really work on the livecd.
+-coolkey
+-wget
 
 # scanning takes quite a bit of space :/
 -xsane

fedora-live-python-classroom.ks

@@ -5,4 +5,5 @@
 # The Workstion based Python Classroom Lab
 
 %include fedora-live-workstation.ks
+%include fedora-live-minimization.ks
 %include fedora-python-classroom-gnome-common.ks

fedora-live-robotics.ks

@@ -47,6 +47,7 @@ firefox
 
 # Dictionaries are big
 -aspell-*
+-hunspell-*
 -man-pages*
 -words
 

fedora-live-scientific_kde.ks

@@ -8,13 +8,169 @@
 # Maintainer: Amit Saha <amitksaha@fedoraproject.org>
 #             https://fedoraproject.org/wiki/User:Amitksaha
 
-%include fedora-live-kde-base.ks
-%include fedora-live-minimization.ks
-%include fedora-scientific-common.ks
+%include fedora-live-kde.ks
 
 # The recommended part size for DVDs is too close to use for the scientific spin
 part / --size 14500
 
+%packages
+
+# Installing the default/mandatory packages from engineering & scientific
+@engineering-and-scientific
+
+# scilab
+scilab
+scilab-devel
+scilab-doc
+
+# Remove sagemath explicitly?
+-sagemath
+
+#Devel tools
+
+#Install the mandatory packages from dev-tools and dev-libs
+# C/C++ compiler, gdb, autotools, bison, flex, make, strace..
+@development-tools
+@development-libs
+@c-development
+@rpm-development-tools
+#others, not included
+# C++ libraries
+blitz-devel
+armadillo-devel
+
+# Misc. related utils
+ddd
+valgrind
+
+#python 2 tools/libraries not included from the groups
+python2-tools
+python-ipython
+python-ipython-console
+python-ipython-notebook
+sympy
+python-networkx
+python-pandas
+
+#python 3 and tools/libraries not included from the groups
+python3
+python3-tools
+python3-matplotlib
+python3-scipy
+python3-numpy
+python3-ipython
+python3-ipython-console
+python3-ipython-notebook
+python3-sympy
+python3-networkx
+python3-pandas
+
+# matplotlib backends
+python-matplotlib-qt4
+python-matplotlib-tk
+python3-matplotlib-qt4
+python3-matplotlib-tk
+
+# Include Java development tools
+@java-development
+apache-commons-math
+
+#fortran compiler
+gcc-gfortran
+
+# GUI for R
+rkward
+
+# GUI for Octave
+qtoctave
+
+# julia
+julia
+julia-doc
+
+# IDEs for the IDE folks
+@eclipse
+spyder
+
+#writing & publishing
+emacs
+emacs-color-theme
+vim
+scribus
+#scite
+lyx
+kile
+
+#Presentation, Bibliography & Document arrangement 
+#tools
+BibTool
+pdfshuffler
+
+# Parallel/Distributed computing libraries/tools
+openmpi
+openmpi-devel
+valgrind-openmpi
+libgomp
+python-pp
+mpi4py-openmpi
+python3-mpi4py-openmpi
+
+#Version control- a GUI for each as well
+
+# Installing rapidsvn will also install subversion package
+rapidsvn 
+git
+git-gui
+# Mercurial
+mercurial
+mercurial-hgk
+
+#Backup Utilities
+backintime-kde
+
+#needs to install this specifically because of some conflict between openmpi
+#and emacs (http://lists.fedoraproject.org/pipermail/devel/2011-July/153812.html)
+libotf
+
+#root
+root
+root-gui-fitpanel
+root-python
+
+#Multiple jobs/clustering system
+# torque
+# torque-server
+# torque-scheduler
+# torque-gui
+# torque-libs
+# torque-mom
+# python-pbs
+
+#Drawing, Picture viewing tools, Visualization tools
+dia
+inkscape
+xzgv
+gimp
+ggobi
+ggobi-devel
+#g3data
+#Mayavi
+
+#Misc. Utils
+screen
+tmux
+rlwrap
+hexchat
+shutter
+fig2ps
+bibtex2html
+hevea
+
+#Include Mozilla Firefox
+firefox
+
+%end
+
 %post
 
 %end

fedora-live-security.ks

@@ -36,6 +36,7 @@ gnome-keyring-pam
 -acpid
 -gimp-help
 -desktop-backgrounds-basic
+-realmd                     # only seems to be used in GNOME
 -PackageKit*                # we switched to dnfdragora, so we don't need this
 -aspell-*                   # dictionaries are big
 -gnumeric

fedora-live-soas.ks

@@ -5,6 +5,8 @@
 #
 # Maintainers:
 # - Peter Robinson <pbrobinson AT gmail DOT com>
+# - Sebastian Dziallas <sdz AT fedoraproject DOT org>
+# - Mel Chua <mchua AT fedoraproject DOT org>
 
 %include fedora-live-base.ks
 %include fedora-live-minimization.ks

fedora-live-workstation.ks

@@ -17,36 +17,16 @@ part / --size 6656
 cat >> /etc/rc.d/init.d/livesys << EOF
 
 
-# disable gnome-software automatically downloading updates
+# disable updates plugin
 cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
 [org.gnome.software]
 download-updates=false
 FOE
 
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
 # don't run gnome-initial-setup
 mkdir ~liveuser/.config
 touch ~liveuser/.config/gnome-initial-setup-done
 
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
 # make the installer show up
 if [ -f /usr/share/applications/liveinst.desktop ]; then
   # Show harddisk install in shell dash

fedora-live-xfce.ks

@@ -60,9 +60,6 @@ sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.d
 mkdir /home/liveuser/Desktop
 cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
 
-# no updater applet in live environment
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
 # and mark it as executable (new Xfce security feature)
 chmod +x /home/liveuser/Desktop/liveinst.desktop
 

fedora-lxqt-common.ks

@@ -5,7 +5,6 @@
 #
 # Maintainer(s):
 # – Christian Dersch <lupinix@fedoraproject.org>
-# – Zamir SUN <zsun@fedoraproject.org>
 #
 
 %packages
@@ -27,9 +26,6 @@ pavucontrol-qt-l10n
 # MP3
 gstreamer1-plugin-mpg123
 
-# Editor
-enki
-
 # remove unneeded stuff to get a lightweight system
 # fonts (we make no bones about admitting we're english-only)
 wqy-microhei-fonts          # a compact CJK font, to replace:
@@ -45,8 +41,7 @@ wqy-microhei-fonts          # a compact CJK font, to replace:
 -@input-methods
 -scim*
 -m17n*
-# Temporary include ibus to workaround RHBZ 1633225
-# -ibus*
+-ibus*
 -iok
 
 # Fix https://bugzilla.redhat.com/show_bug.cgi?id=1429132

fedora-mate-common.ks

@@ -1,4 +1,6 @@
 %packages
+-PackageKit*                # we switched to dnfdragora, so we don't need this
+firefox
 @mate
 compiz
 compiz-plugins-main
@@ -14,11 +16,22 @@ emerald-themes
 emerald
 fusion-icon
 @networkmanager-submodules
+blueberry
 
 # some apps from mate-applications
 caja-actions
 mate-disk-usage-analyzer
 
+# system tools
+system-config-printer
+system-config-printer-applet
+lightdm-gtk-greeter-settings
+
+# audio video
+parole
+exaile
+gstreamer1-plugins-ugly-free # mp3 support
+
 # blacklist applications which breaks mate-desktop
 -audacious
 
@@ -28,6 +41,10 @@ mate-disk-usage-analyzer
 # dsl tools
 rp-pppoe
 
+# some tools
+p7zip
+p7zip-plugins
+
 # FIXME; apparently the glibc maintainers dislike this, but it got put into the
 # desktop image at some point.  We won't touch this one for now.
 nss-mdns
@@ -35,6 +52,7 @@ nss-mdns
 # Drop things for size
 -@3d-printing
 -brasero
+-colord
 -fedora-icon-theme
 -gnome-icon-theme
 -gnome-icon-theme-symbolic

fedora-minimal-common.ks

@@ -3,10 +3,6 @@
 -initial-setup-gui
 -generic-release*
 -glibc-all-langpacks
-# recommended by iproute, we don't want it in minimal
--iproute-tc
-# recommended by gnutls, we don't want it in minimal
--trousers
 glibc-langpack-en
 iw
 NetworkManager-wifi

fedora-modular-container-common.ks

@@ -27,7 +27,7 @@ reboot
 # boot partitions are irrelevant as the final container image is a tarball
 zerombr
 clearpart --all
-autopart --nohome --noswap --nolvm
+autopart --noboot --nohome --noswap --nolvm
 
 %packages --excludedocs --instLangs=en --nocore
 fedora-modular-release

fedora-modular-disk-minimal.ks

@@ -56,6 +56,8 @@ dhcp-client
 %post
 
 # Setup Raspberry Pi firmware
+#cp -Pr /usr/share/bcm283x-firmware/* /boot/efi/
+mv -f /boot/efi/config-64.txt /boot/efi/config.txt
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 
 releasever=$(rpm -q --qf '%{version}\n' fedora-modular-release)

fedora-python-classroom-gnome-common.ks

@@ -18,6 +18,7 @@ python3-pillow-tk
 -@sound-and-video
 -@multimedia
 -dleyna*
+-evolution*
 -gnome-boxes
 -gnome-calendar
 -gnome-clocks
@@ -26,7 +27,6 @@ python3-pillow-tk
 -gnome-documents
 -gnome-font-viewer
 -gnome-maps
--gnome-photos
 -gnome-weather
 -grilo-plugins
 -cheese
@@ -35,6 +35,7 @@ python3-pillow-tk
 
 # This is no longer workstation
 -@workstation-product
+-fedora-productimg-workstation
 
 # Add a web browser
 @firefox
@@ -55,11 +56,11 @@ python3-pillow-tk
 
 # Dictionaries are big
 -aspell-*
+-hunspell-*
 -words
 
 # Help and art can be big, too
 -gnome-user-docs
--gnome-getting-started-docs
 -desktop-backgrounds-basic
 -*backgrounds-extras
 

fedora-repo.ks

@@ -3,7 +3,7 @@
 # Exactly one of the following should be uncommented
 
 # For the master branch the following should be uncommented
-#%include fedora-repo-rawhide.ks
+# %include fedora-repo-rawhide.ks
 
 # For non-master branches the following should be uncommented
 %include fedora-repo-not-rawhide.ks

fedora-scientific-common.ks

@@ -1,160 +0,0 @@
-%packages
-
-# Installing the default/mandatory packages from engineering & scientific
-@engineering-and-scientific
-
-# scilab
-scilab
-scilab-devel
-scilab-doc
-
-# Remove sagemath explicitly?
--sagemath
-
-#Devel tools
-
-#Install the mandatory packages from dev-tools and dev-libs
-# C/C++ compiler, gdb, autotools, bison, flex, make, strace..
-@development-tools
-@development-libs
-@c-development
-@rpm-development-tools
-#others, not included
-# C++ libraries
-blitz-devel
-armadillo-devel
-
-# Misc. related utils
-ddd
-valgrind
-
-#python 2 tools/libraries not included from the groups
-python2-tools
-python-ipython
-python-ipython-console
-python-ipython-notebook
-sympy
-python-networkx
-python-pandas
-
-#python 3 and tools/libraries not included from the groups
-python3
-python3-tools
-python3-matplotlib
-python3-scipy
-python3-numpy
-python3-ipython
-python3-ipython-console
-python3-ipython-notebook
-python3-sympy
-python3-networkx
-python3-pandas
-
-# matplotlib backends
-python-matplotlib-qt4
-python-matplotlib-tk
-python3-matplotlib-qt4
-python3-matplotlib-tk
-
-# Include Java development tools
-@java-development
-apache-commons-math
-
-#fortran compiler
-gcc-gfortran
-
-# GUI for R
-rkward
-
-# GUI for Octave
-qtoctave
-
-# julia
-# Comment out till https://koji.fedoraproject.org/koji/buildinfo?buildID=1135023 is fixed
-# julia
-# julia-doc
-
-# IDEs for the IDE folks
-@eclipse
-# Workaround for: https://pagure.io/releng/issue/7814
--eclipse-linuxtools-vagrant
-spyder
-
-#writing & publishing
-emacs
-emacs-color-theme
-vim
-scribus
-#scite
-lyx
-kile
-
-#Presentation, Bibliography & Document arrangement 
-#tools
-BibTool
-pdfshuffler
-
-# Parallel/Distributed computing libraries/tools
-openmpi
-openmpi-devel
-valgrind-openmpi
-libgomp
-python-pp
-mpi4py-openmpi
-python3-mpi4py-openmpi
-
-#Version control- a GUI for each as well
-
-# Installing rapidsvn will also install subversion package
-rapidsvn 
-git
-git-gui
-# Mercurial
-mercurial
-mercurial-hgk
-
-#Backup Utilities
-backintime-kde
-
-#needs to install this specifically because of some conflict between openmpi
-#and emacs (http://lists.fedoraproject.org/pipermail/devel/2011-July/153812.html)
-libotf
-
-#root
-root
-root-gui-fitpanel
-root-python
-
-#Multiple jobs/clustering system
-# torque
-# torque-server
-# torque-scheduler
-# torque-gui
-# torque-libs
-# torque-mom
-# python-pbs
-
-#Drawing, Picture viewing tools, Visualization tools
-dia
-inkscape
-xzgv
-gimp
-ggobi
-ggobi-devel
-#g3data
-#Mayavi
-
-#Misc. Utils
-screen
-tmux
-rlwrap
-hexchat
-shutter
-fig2ps
-bibtex2html
-hevea
-
-#Include Mozilla Firefox
-firefox
-
-%end

fedora-scientific-vagrant.ks

@@ -1,12 +0,0 @@
-# Fedora Scientific  Vagrant box
-
-# Fedora Scientific: For researchers in Science and Engineering
-# Fedora-Scientific aims to create a Fedora which has the generic
-# toolset for the researcher
-# Web: https://labs.fedoraproject.org/en/scientific/
-
-# Maintainer: Amit Saha <amitksaha@fedoraproject.org>
-#             https://fedoraproject.org/wiki/User:Amitksaha
-
-%include fedora-cloud-base-vagrant.ks
-%include fedora-scientific-common.ks

fedora-soas-common.ks

@@ -30,7 +30,7 @@ firewall --enabled --service=mdns,presence
 -abrt-cli
 -ibus*
 -hyperv-daemons
--webkit2gtk3-plugin-process-gtk2
+-webkitgtk4-plugin-process-gtk2
 
 # Add some extra fonts
 dejavu-sans-fonts
@@ -76,10 +76,6 @@ pulseaudio-utils
 # http://bugs.sugarlabs.org/ticket/1951
 rp-pppoe
 
-# Useful for SoaS duplication from:
-# http://bugs.sugarlabs.org/ticket/74
-livecd-tools
-
 # Get the Sugar boot screen
 -plymouth-system-theme
 -plymouth-theme-charge
@@ -92,7 +88,7 @@ sugar-logos
 # Rebuild initrd for Sugar boot screen
 KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
 /usr/sbin/plymouth-set-default-theme sugar
-dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
+/sbin/dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
 
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*
@@ -163,6 +159,6 @@ show-logout=false
 [org.sugarlabs.power]
 automatic=true
 EOF
-/usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas
+/usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/sugar.soas.gschema.override
 
 %end

fedora-workstation-common.ks

@@ -20,6 +20,9 @@
 @printing
 @workstation-product
 
+# Branding for the installer
+fedora-productimg-workstation
+
 # Exclude unwanted packages from @anaconda-tools group
 -gfs2-utils
 -reiserfs-utils

fedora-xfce-common.ks

@@ -27,8 +27,10 @@ gnome-keyring-pam
 # Note that blank is still default.
 xscreensaver-extras
 wget
+# Handy for debugging
+rfkill
 # Better more popular browser
-#firefox
+firefox
 system-config-printer
 
 # save some space
@@ -36,6 +38,7 @@ system-config-printer
 -acpid
 -gimp-help
 -desktop-backgrounds-basic
+-PackageKit*                # we switched to dnfdragora, so we don't need this
 -aspell-*                   # dictionaries are big
 -xfce4-sensors-plugin
 

l10n/fedora-live-workstation-ja_JP.ks

@@ -1,40 +0,0 @@
-# fedora-live-workstation-ja_JP.ks
-#
-# Description:
-# - Japanese Fedora Live Spin with the Gnome Desktop Environment
-#
-# Maintainer(s):
-# - Shintaro Fujiwara <shintaro.fujiwara@miraclelinux.com>
-
-%include ../fedora-live-workstation.ks
-
-lang ja_JP.UTF-8
-keyboard jp
-timezone Asia/Tokyo
-
-%packages
-@japanese-support
-# exclude input methods except ibus:
--m17n*
--scim*
--iok
-# ibus stuff
-ibus-kkc
-imsettings
-%end
-
-%post
-cat > /etc/X11/xorg.conf.d/00-keyboard.conf << "EOF"
-# Read and parsed by systemd-localed. It's probably wise not to edit this file
-# manually too freely.
-Section "InputClass"
-        Identifier "system-keyboard"
-        MatchIsKeyboard "on"
-        Option "XkbLayout" "jp"
-        Option "XkbModel" "jp106"
-EndSection
-EOF
-
-gsettings set org.gnome.desktop.input-sources sources "[('ibus', 'kkc'), ('xkb', 'jp')]"
-
-%end

l10n/fedora-livecd-kde-ja_JP.ks

@@ -1,40 +0,0 @@
-# fedora-livecd-kde-ja_JP.ks
-#
-# Description:
-# - Japanese Fedora Live Spin with the KDE Desktop Environment
-#
-# Maintainer(s):
-# - Shintaro Fujiwara <shintaro.fujiwara@miraclelinux.com>
-
-%include ../fedora-live-kde.ks
-
-lang ja_JP.UTF-8
-keyboard jp
-timezone Asia/Tokyo
-
-%packages
-@japanese-support
-# exclude input methods except ibus:
--m17n*
--scim*
--iok
-# ibus-stuff 
-fcitx-qt5
-ibus-kkc
-ibus-mozc
-ibus-qt
-kcm-fcitx
-%end
-
-%post
-cat > /etc/X11/xorg.conf.d/00-keyboard.conf << "EOF"
-# Read and parsed by systemd-localed. It's probably wise not to edit this file
-# manually too freely.
-Section "InputClass"
-        Identifier "system-keyboard"
-        MatchIsKeyboard "on"
-        Option "XkbLayout" "jp"
-        Option "XkbModel" "jp106"
-EndSection
-EOF
-%end

l10n/fedora-livecd-lxde-ja_JP.ks

@@ -14,9 +14,10 @@ timezone Asia/Tokyo
 
 %packages
 @japanese-support
-# exclude input methods except ibus:
+# exclude input methods:
 -m17n*
 -scim*
+-ibus*
 -iok
 # Better more popular browser
 firefox