atomic: switch to build from updates ref

We build from the updates ref and set the system to upgrade from
the prod ref.

fedora-aos.ks

@@ -0,0 +1,102 @@
+# Kickstart file to build the appliance operating
+# system for fedora.
+# This is based on the work at http://www.thincrust.net
+lang C
+keyboard us
+timezone US/Eastern
+auth --useshadow --passalgo=sha512
+selinux --permissive
+firewall --disabled
+bootloader --timeout=1 --append="acpi=force"
+network --bootproto=dhcp --device=eth0 --onboot=on
+
+# Uncomment the next line
+# to make the root password be thincrust
+# By default the root password is emptied
+#rootpw --iscrypted $1$uw6MV$m6VtUWPed4SqgoW6fKfTZ/
+
+#
+# Partition Information. Change this as necessary
+# This information is used by appliance-tools but
+# not by the livecd tools.
+#
+part / --size 1024 --fstype ext4 --ondisk sda
+
+#
+# Repositories
+#
+%include fedora-repo.ks
+
+#
+# Add all the packages after the base packages
+#
+%packages --excludedocs --nobase
+bash
+kernel
+grub
+e2fsprogs
+passwd
+policycoreutils
+chkconfig
+rootfiles
+yum
+vim-minimal
+acpid
+#needed to disable selinux
+lokkit
+
+#Allow for dhcp access
+dhclient
+iputils
+
+#
+# Packages to Remove
+#
+
+# no need for kudzu if the hardware doesn't change
+-kudzu
+-prelink
+-setserial
+-ed
+
+# Remove the authconfig pieces
+-authconfig
+-rhpl
+-wireless-tools
+
+# Remove the kbd bits
+-kbd
+-usermode
+
+# these are all kind of overkill but get pulled in by mkinitrd ordering
+-mkinitrd
+-kpartx
+-dmraid
+-mdadm
+-lvm2
+-tar
+
+# selinux toolchain of policycoreutils, libsemanage, ustr
+-policycoreutils
+-checkpolicy
+-selinux-policy*
+-libselinux-python
+-libselinux
+
+# Things it would be nice to loose
+-fedora-logos
+generic-logos
+-fedora-release-notes
+%end
+
+#
+# Add custom post scripts after the base post.
+#
+%post
+
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+%end
+

fedora-arm-base.ks

@@ -4,7 +4,8 @@ auth --useshadow --passalgo=sha512
 selinux --enforcing
 firewall --enabled --service=mdns,ssh
 
-bootloader --location=mbr
+# configure extlinux bootloader
+bootloader extlinux
 
 part /boot/fw --size=30 --fstype vfat --asprimary
 part /boot --size=512 --fstype ext4 --asprimary
@@ -38,6 +39,7 @@ initial-setup
 initial-setup-gui
 -iwl*
 -ipw*
+-trousers-lib
 -usb_modeswitch
 -iproute-tc
 #lets resize / on first boot
@@ -46,6 +48,13 @@ initial-setup-gui
 # make sure all the locales are available for inital0-setup and anaconda to work
 glibc-all-langpacks
 
+# workaround for consequence of RHBZ #1324623: without this, with
+# yum-based creation tools, compose fails due to conflict between
+# libcrypt and libcrypt-nss. dnf does not seem to have the same
+# issue, so this may be dropped when appliance-creator is ported
+# to dnf.
+libcrypt-nss
+-libcrypt
 %end
 
 %post

fedora-arm-kde.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-kde-common.ks
 
-part / --size=6300 --fstype ext4
+part / --size=5690 --fstype ext4
 
 %post
 

fedora-arm-lxde.ks

@@ -2,8 +2,6 @@
 %include fedora-arm-xbase.ks
 %include fedora-lxde-common.ks
 
-part / --size=4000 --fstype ext4
-
 %post
 
 %end

fedora-arm-lxqt.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-lxqt-common.ks
 
-part / --size=4200 --fstype ext4 --asprimary
+part / --size=3800 --fstype ext4 --asprimary
 
 %packages
 # trojita not available on non-x86 platforms

fedora-arm-mate.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-mate-common.ks
 
-part / --size=6000 --fstype ext4
+part / --size=5500 --fstype ext4
 
 %post
 

fedora-arm-server.ks

@@ -4,13 +4,10 @@
 part / --size=2500 --fstype xfs
 
 %packages
-# install the default groups for the server environment since installing the environment is not working
+# install the default groups for the server evironment since installing the environment is not working
 @server-product
 @standard
 @headless-management
-@hardware-support
-@networkmanager-submodules
-
 @container-management
 @domain-client
 -initial-setup-gui

fedora-arm-workstation.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-workstation-common.ks
 
-part / --size=6200 --fstype ext4
+part / --size=5500 --fstype ext4
 
 %packages
 -initial-setup

fedora-arm-xfce.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-xfce-common.ks
 
-part / --size=4700 --fstype ext4
+part / --size=4500 --fstype ext4
 
 %post
 

fedora-atomic.ks

@@ -1,20 +1,10 @@
-# Fedora Atomic Host is the Fedora version of the "Atomic Host" pattern
+# Fedora Atomic is a cloud-focused spin implementing the Project
-# from [Project Atomic](http://www.projectatomic.io/).
+# Atomic patterns.  Note that this replicates the same tree which can
+# now be installed on bare metal.
 
-# This kickstart is used for cloud/virt images, and uses cloud-init
+# This image allocates most space to an LVM-managed thin pool
-# to bootstrap authentication, just like Fedora Cloud Base.  (Also note the
+# dedicated for Docker containers, and uses docker-storage-setup to
-# fedora-atomic-vagrant.ks kickstart inherits from this).
+# dynamically resize storage on boot.
-
-# One very important thing to understand is that this image contains the same
-# OSTree commit as will be used on bare metal installations - Fedora Atomic Host
-# also has an ISO. One difference though is that cloud-init isn't enabled for
-# bare metal. When processing this kickstart then, Anaconda isn't actually
-# installing packages - it's just replicating a "pre-assembled" tree from
-# rpm-ostree.
-
-# Basically, the `ostreesetup` verb replaces the traditional `%packages`
-# section. For example, `rpm-ostree status` can show you the same checksum and
-# version from an ISO install and this cloud image - it's the same bits.
 
 text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
 lang en_US.UTF-8
@@ -25,8 +15,6 @@ auth --useshadow --passalgo=sha512
 selinux --enforcing
 rootpw --lock --iscrypted locked
 
-# Explicitly disable firewall since cloud providers generally provide
-# higher level firewall constructs (i.e. security groups).
 firewall --disabled
 
 # console=ttyAMA0 and console=hvc0 as kernel boot parameter to see
@@ -41,8 +29,7 @@ services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
 zerombr
 clearpart --all
 # Implement: https://pagure.io/atomic-wg/issue/281
-# The bare metal layout currently inherits from fedora server and is in
+# The bare metal layout default is in http://pkgs.fedoraproject.org/cgit/rpms/fedora-productimg-atomic.git
-# https://github.com/rhinstaller/anaconda/blob/master/pyanaconda/installclasses/fedora_atomic_host.py
 # However, the disk size is currently just 6GB for the cloud image (defined in pungi-fedora).  So the
 # "15GB, rest unallocated" model doesn't make sense.  The Vagrant box is 40GB (apparently a number of
 # Vagrant boxes come big and rely on thin provisioning).
@@ -58,7 +45,7 @@ logvol / --size=3000 --grow --fstype="xfs" --name=root --vgname=atomicos
 
 # Equivalent of %include fedora-repo.ks
 # Pull from the ostree repo that was created during the compose
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/atomic/repo/ --ref=fedora/28/${basearch}/updates/atomic-host
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/atomic/27/ --ref=fedora/27/${basearch}/updates/atomic-host
 
 reboot
 
@@ -68,20 +55,19 @@ arch=$(uname -m)
 
 # Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.
 # We want consumers of this image to track the two week releases.
-ostree admin set-origin --index 0 fedora-atomic https://kojipkgs.fedoraproject.org/compose/atomic/repo/ "fedora/28/${arch}/atomic-host"
+ostree admin set-origin --index 0 fedora-atomic https://kojipkgs.fedoraproject.org/atomic/27/ "fedora/27/${arch}/atomic-host"
 
 # Make sure the ref we're supposedly sitting on (according
 # to the updated origin) exists.
-ostree refs "fedora-atomic:fedora/28/${arch}/updates/atomic-host" --create "fedora-atomic:fedora/28/${arch}/atomic-host"
+ostree refs "fedora-atomic:fedora/27/${arch}/updates/atomic-host" --create "fedora-atomic:fedora/27/${arch}/atomic-host"
 
 # Remove the old ref so that the commit eventually gets
 # cleaned up.
-ostree refs "fedora-atomic:fedora/28/${arch}/updates/atomic-host" --delete
+ostree refs "fedora-atomic:fedora/27/${arch}/updates/atomic-host" --delete
 
 # delete/add the remote with new options to enable gpg verification
-# and to point them at the cdn url
 ostree remote delete fedora-atomic
-ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-28-primary fedora-atomic 'https://dl.fedoraproject.org/atomic/repo/'
+ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-27-primary fedora-atomic 'https://kojipkgs.fedoraproject.org/atomic/27/'
 
 # older versions of livecd-tools do not follow "rootpw --lock" line above
 # https://bugzilla.redhat.com/show_bug.cgi?id=964299
@@ -110,9 +96,12 @@ NETWORKING=yes
 NOZEROCONF=yes
 EOF
 
-# Remove any persistent NIC rules generated by udev
+# For cloud images, 'eth0' _is_ the predictable device name, since
-rm -vf /etc/udev/rules.d/*persistent-net*.rules
+# we don't want to be tied to specific virtual (!) hardware
-# And ensure that we will do DHCP on eth0 on startup
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
 cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
 DEVICE="eth0"
 BOOTPROTO="dhcp"
@@ -121,12 +110,24 @@ TYPE="Ethernet"
 PERSISTENT_DHCLIENT="yes"
 EOF
 
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
 # Because memory is scarce resource in most cloud/virt environments,
 # and because this impedes forensics, we are differing from the Fedora
 # default of having /tmp on tmpfs.
 echo "Disabling tmpfs for /tmp."
 systemctl mask tmp.mount
 
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
 # Uncomment this if you want to use cloud init but suppress the creation
 # of an "ec2-user" account. This will, in the absence of further config,
 # cause the ssh key from a metadata source to be put in the root account.

fedora-cinnamon-common.ks

@@ -12,7 +12,16 @@
 @cinnamon-desktop
 @libreoffice
 
+# internet and multimedia
+pidgin
+hexchat
+transmission
+
+# mp3 support
+gstreamer1-plugins-ugly-free
+
 # extra backgrounds
-f27-backgrounds-extras-gnome
+desktop-backgrounds-basic
+f26-backgrounds-extras-gnome
 
 %end

fedora-cloud-base-vagrant.ks

@@ -32,8 +32,6 @@ dnf-yum
 # users setup. This can actually take a bit of time.  Just fold it
 # in to the base box disk image
 rsync
-# Add in sshfs for vagrant-sshfs plugin
-fuse-sshfs
 %end
 
 %post --erroronfail

fedora-cloud-base.ks

@@ -35,8 +35,7 @@ rootpw --lock --iscrypted locked
 
 firewall --disabled
 
-# We pass net.ifnames=0 because we always want to use eth0 here on all the cloud images.
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
-bootloader --timeout=1 --append="no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
 
 network --bootproto=dhcp --device=link --activate --onboot=on
 services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
@@ -171,6 +170,11 @@ NOZEROCONF=yes
 DEVTIMEOUT=10
 EOF
 
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
 # simple eth0 config, again not hard-coded to the build hardware
 cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
 DEVICE="eth0"
@@ -241,12 +245,8 @@ dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
 rm -f /var/tmp/zeros
 echo "(Don't worry -- that out-of-space error was expected.)"
 
-# When we build the image with oz, dracut is used 
+# For trac ticket https://fedorahosted.org/cloud/ticket/128
-# and sets up a ifcfg-en<whatever> for the device. We don't 
+rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
-# want to use this, we use eth0 so it is always the same. 
-# So we remove all these ifcfg-en<whatever> devices so 
-# The 'network' service can come up cleanly.
-rm -f /etc/sysconfig/network-scripts/ifcfg-en*
 
 # Enable network service here, as doing it in the services line
 # fails due to RHBZ #1369794

fedora-disk-base.ks

@@ -55,6 +55,13 @@ initial-setup
 # make sure all the locales are available for inital0-setup and anaconda to work
 glibc-all-langpacks
 
+# workaround for consequence of RHBZ #1324623: without this, with
+# yum-based creation tools, compose fails due to conflict between
+# libcrypt and libcrypt-nss. dnf does not seem to have the same
+# issue, so this may be dropped when appliance-creator is ported
+# to dnf.
+libcrypt-nss
+-libcrypt
 %end
 
 %post

fedora-disk-server.ks

@@ -5,13 +5,10 @@ services --enabled=sshd,NetworkManager,chronyd,initial-setup
 autopart
 
 %packages
-# install the default groups for the server environment since installing the environment is not working
+# install the default groups for the server evironment since installing the environment is not working
 @server-product
 @standard
 @headless-management
-@hardware-support
-@networkmanager-submodules
-
 @container-management
 @domain-client
 -initial-setup-gui

fedora-docker-common.ks

@@ -32,24 +32,17 @@ autopart --noboot --nohome --noswap --nolvm
 %packages --excludedocs --instLangs=en --nocore
 fedora-release
 bash
-coreutils
-glibc-minimal-langpack
-libcrypt
-rpm
-shadow-utils
-sssd-client
-util-linux
 -kernel
 -dosfstools
 -e2fsprogs
 -fuse-libs
 -gnupg2-smime
 -libss # used by e2fsprogs
+-libusbx
 -pinentry
 -shared-mime-info
 -trousers
 -xkeyboard-config
--grubby
 
 %end
 

fedora-iot.ks

@@ -1,121 +0,0 @@
-# This is the kickstart for Fedora IoT disk images.
-
-text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
-lang en_US.UTF-8
-keyboard us
-timezone --utc Etc/UTC
-
-auth --useshadow --passalgo=sha512
-selinux --enforcing
-rootpw --lock --iscrypted locked
-firstboot --reconfig --enable
-
-# Add most common consoles console=ttyAMA0 console=ttyS0 console=ttyS1 as kernel boot parameter
-bootloader --timeout=1 --append="console=tty1 console=ttyS0,115200n8 console=ttyS1,115200n8 console=ttyAMA0,115200n8 net.ifnames=0 modprobe.blacklist=vc4"
-
-network --bootproto=dhcp --device=link --activate --onboot=on
-services --enabled=NetworkManager,sshd,rngd,initial-setup
-
-# tell Initial Setup to run in the reconfig mode
-firstboot --reconfig --enable
-
-zerombr
-clearpart --all
-autopart --nohome --noswap --type=plain
-
-# Equivalent of %include fedora-repo.ks
-# Pull from the ostree repo that was created during the compose
-ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/28/${basearch}/iot
-
-reboot
-
-%post --erroronfail
-# Find the architecture we are on
-arch=$(uname -m)
-
-# Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
-cp -Pr /usr/share/bcm283x-firmware/* /boot/efi/
-if [[ $arch == "aarch64" ]]; then
-mv -f /boot/efi/config-64.txt /boot/efi/config.txt
-cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
-else
-cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/fw/rpi2-u-boot.bin
-cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/fw/rpi3-u-boot.bin
-fi
-fi
-
-# Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.
-# We want consumers of this image to track the two week releases.
-ostree admin set-origin --index 0 fedora-iot https://kojipkgs.fedoraproject.org/iot/28/ "fedora/28/${arch}/iot"
-
-# Make sure the ref we're supposedly sitting on (according
-# to the updated origin) exists.
-ostree refs "fedora-iot:fedora/28/${arch}/iot" --create "fedora-iot:fedora/28/${arch}/iot"
-
-# Remove the old ref so that the commit eventually gets cleaned up.
-ostree refs "fedora-iot:fedora/28/${arch}/iot" --delete
-
-# delete/add the remote with new options to enable gpg verification
-# and to point them at the cdn url
-ostree remote delete fedora-iot
-ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-28-primary fedora-iot 'https://dl.fedoraproject.org/iot/repo/'
-
-# older versions of livecd-tools do not follow "rootpw --lock" line above
-# https://bugzilla.redhat.com/show_bug.cgi?id=964299
-passwd -l root
-
-# Work around https://bugzilla.redhat.com/show_bug.cgi?id=1193590
-cp /etc/skel/.bash* /var/roothome
-
-echo -n "Network fixes"
-# initscripts don't like this file to be missing.
-cat > /etc/sysconfig/network << EOF
-NETWORKING=yes
-NOZEROCONF=yes
-EOF
-
-# Remove any persistent NIC rules generated by udev
-rm -vf /etc/udev/rules.d/*persistent-net*.rules
-# And ensure that we will do DHCP on eth0 on startup
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-
-echo "Removing random-seed so it's not the same in every image."
-rm -f /var/lib/systemd/random-seed
-
-echo "Packages within this iot image:"
-echo "-----------------------------------------------------------------------"
-rpm -qa
-echo "-----------------------------------------------------------------------"
-# Note that running rpm recreates the rpm db files which aren't needed/wanted
-rm -f /var/lib/rpm/__db*
-
-echo "Zeroing out empty space."
-# This forces the filesystem to reclaim space from deleted files
-dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
-rm -f /var/tmp/zeros
-echo "(Don't worry -- that out-of-space error was expected.)"
-
-# For trac ticket https://pagure.io/atomic-wg/issue/128
-rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
-
-echo "Adding Developer Mode GRUB2 menu item."
-/usr/libexec/atomic-devmode/bootentry add
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794
-/sbin/chkconfig network off
-
-# Anaconda is writing an /etc/resolv.conf from the install environment.
-# The system should start out with an empty file, otherwise cloud-init
-# will try to use this information and may error:
-# https://bugs.launchpad.net/cloud-init/+bug/1670052
-truncate -s 0 /etc/resolv.conf
-
-%end

fedora-kde-common.ks

@@ -1,4 +1,3 @@
-
 %packages
 @firefox
 @kde-apps
@@ -11,7 +10,7 @@
 ### The KDE-Desktop
 
 ### Browser
-falkon
+qupzilla
 
 ### fixes
 
@@ -19,7 +18,7 @@ falkon
 -system-config-printer
 # make sure mariadb lands instead of MySQL (hopefully a temporary hack)
 mariadb-embedded
-mariadb-connector-c
+mariadb-libs
 mariadb-server
 
 # minimal localization support - allows installing the kde-l10n-* packages
@@ -45,6 +44,23 @@ mediawriter
 
 ### space issues
 
+# fonts (we make no bones about admitting we're english-only)
+wqy-microhei-fonts			# a compact CJK font, to replace:
+-naver-nanum-gothic-fonts		# Korean
+-vlgothic-fonts				# Japanese
+-adobe-source-han-sans-cn-fonts		# simplified Chinese
+-adobe-source-han-sans-tw-fonts 	# traditional Chinese
+
+-paratype-pt-sans-fonts	# Cyrillic (already supported by DejaVu), huge
+#-stix-fonts		# mathematical symbols
+
+# remove input methods to free space
+-@input-methods
+-scim*
+-m17n*
+-ibus*
+-iok
+
 # admin-tools
 -gnome-disk-utility
 # kcm_clock still lacks some features, so keep system-config-date around

fedora-kde-minimization.ks

@@ -1,8 +0,0 @@
-# remove input methods to free space
-%packages
--@input-methods
--scim*
--iok
-%end
-
-

fedora-live-astronomy_kde.ks

@@ -14,8 +14,7 @@
 # Maintainer: Christian Dersch <lupinix@fedoraproject.org>
 #             https://fedoraproject.org/wiki/User:Lupinix
 
-%include fedora-live-kde-base.ks
+%include fedora-live-kde.ks
-%include fedora-live-minimization.ks
 
 # The recommended part size for DVDs is too close to use for the astronomy spin
 part / --size 14500

fedora-live-base.ks

@@ -56,6 +56,7 @@ aajohan-comfortaa-fonts
 
 # Without this, initramfs generation during live image creation fails: #1242586
 dracut-live
+grub2-efi
 syslinux
 
 # anaconda needs the locales available to run for different locales

fedora-live-design_suite.ks

@@ -31,9 +31,10 @@ gnome-todo
 powerline
 powerline-fonts
 
+
 # Extra wallpapers
-# f26-backgrounds-extras-base
+f26-backgrounds-extras-base
-# f26-backgrounds-extras-gnome
+f26-backgrounds-extras-gnome
 
 # removal of unneeded applications
 -gnome-boxes
@@ -46,7 +47,7 @@ powerline-fonts
 #Override the favorite desktop application in Dash
 cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
 [org.gnome.shell]
-favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'pitivi.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
+favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
 FOE
 
 # Add link to lists of tutorials

fedora-live-jam_kde.ks

@@ -77,7 +77,7 @@ sooperlooper
 
 #recodring and DAW
 audacity
-ardour5
+ardour4
 rosegarden4
 seq24
 muse

fedora-live-kde.ks

@@ -9,10 +9,9 @@
 
 %include fedora-live-kde-base.ks
 %include fedora-live-minimization.ks
-%include fedora-kde-minimization.ks
 
 # DVD payload
-part / --size=6200
+part / --size=6144
 
 %post
 %end

fedora-live-minimization.ks

@@ -12,6 +12,7 @@
 -autofs
 # smartcards won't really work on the livecd.
 -coolkey
+-wget
 
 # scanning takes quite a bit of space :/
 -xsane

fedora-live-robotics.ks

@@ -47,6 +47,7 @@ firefox
 
 # Dictionaries are big
 -aspell-*
+-hunspell-*
 -man-pages*
 -words
 

fedora-live-scientific_kde.ks

@@ -8,8 +8,7 @@
 # Maintainer: Amit Saha <amitksaha@fedoraproject.org>
 #             https://fedoraproject.org/wiki/User:Amitksaha
 
-%include fedora-live-kde-base.ks
+%include fedora-live-kde.ks
-%include fedora-live-minimization.ks
 
 # The recommended part size for DVDs is too close to use for the scientific spin
 part / --size 14500
@@ -20,9 +19,9 @@ part / --size 14500
 @engineering-and-scientific
 
 # scilab
-#scilab
+scilab
-#scilab-devel
+scilab-devel
-#scilab-doc
+scilab-doc
 
 # Remove sagemath explicitly?
 -sagemath
@@ -50,7 +49,7 @@ python-ipython
 python-ipython-console
 python-ipython-notebook
 sympy
-#python-networkx
+python-networkx
 python-pandas
 
 #python 3 and tools/libraries not included from the groups
@@ -63,7 +62,7 @@ python3-ipython
 python3-ipython-console
 python3-ipython-notebook
 python3-sympy
-#python3-networkx
+python3-networkx
 python3-pandas
 
 # matplotlib backends
@@ -80,7 +79,7 @@ apache-commons-math
 gcc-gfortran
 
 # GUI for R
-#rkward
+rkward
 
 # GUI for Octave
 qtoctave
@@ -91,11 +90,13 @@ julia-doc
 
 # IDEs for the IDE folks
 @eclipse
-spyder
+#spyder
 
 #writing & publishing
-emacs
+# https://bugzilla.redhat.com/show_bug.cgi?id=1506888
-emacs-color-theme
+#emacs
+#emacs-color-theme
+
 vim
 scribus
 #scite

fedora-live-security.ks

@@ -36,6 +36,7 @@ gnome-keyring-pam
 -acpid
 -gimp-help
 -desktop-backgrounds-basic
+-realmd                     # only seems to be used in GNOME
 -PackageKit*                # we switched to dnfdragora, so we don't need this
 -aspell-*                   # dictionaries are big
 -gnumeric

fedora-live-workstation.ks

@@ -17,36 +17,16 @@ part / --size 6656
 cat >> /etc/rc.d/init.d/livesys << EOF
 
 
-# disable gnome-software automatically downloading updates
+# disable updates plugin
 cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
 [org.gnome.software]
 download-updates=false
 FOE
 
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
 # don't run gnome-initial-setup
 mkdir ~liveuser/.config
 touch ~liveuser/.config/gnome-initial-setup-done
 
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
 # make the installer show up
 if [ -f /usr/share/applications/liveinst.desktop ]; then
   # Show harddisk install in shell dash

fedora-live-xfce.ks

@@ -60,9 +60,6 @@ sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.d
 mkdir /home/liveuser/Desktop
 cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
 
-# no updater applet in live environment
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
 # and mark it as executable (new Xfce security feature)
 chmod +x /home/liveuser/Desktop/liveinst.desktop
 

fedora-mate-common.ks

@@ -1,4 +1,6 @@
 %packages
+-PackageKit*                # we switched to dnfdragora, so we don't need this
+firefox
 @mate
 compiz
 compiz-plugins-main
@@ -14,11 +16,22 @@ emerald-themes
 emerald
 fusion-icon
 @networkmanager-submodules
+blueberry
 
 # some apps from mate-applications
 caja-actions
 mate-disk-usage-analyzer
 
+# system tools
+system-config-printer
+system-config-printer-applet
+lightdm-gtk-greeter-settings
+
+# audio video
+parole
+exaile
+gstreamer1-plugins-ugly-free # mp3 support
+
 # blacklist applications which breaks mate-desktop
 -audacious
 
@@ -28,6 +41,10 @@ mate-disk-usage-analyzer
 # dsl tools
 rp-pppoe
 
+# some tools
+p7zip
+p7zip-plugins
+
 # FIXME; apparently the glibc maintainers dislike this, but it got put into the
 # desktop image at some point.  We won't touch this one for now.
 nss-mdns

fedora-python-classroom-gnome-common.ks

@@ -18,6 +18,7 @@ python3-pillow-tk
 -@sound-and-video
 -@multimedia
 -dleyna*
+-evolution*
 -gnome-boxes
 -gnome-calendar
 -gnome-clocks
@@ -26,7 +27,6 @@ python3-pillow-tk
 -gnome-documents
 -gnome-font-viewer
 -gnome-maps
--gnome-photos
 -gnome-weather
 -grilo-plugins
 -cheese
@@ -35,6 +35,7 @@ python3-pillow-tk
 
 # This is no longer workstation
 -@workstation-product
+-fedora-productimg-workstation
 
 # Add a web browser
 @firefox
@@ -55,11 +56,11 @@ python3-pillow-tk
 
 # Dictionaries are big
 -aspell-*
+-hunspell-*
 -words
 
 # Help and art can be big, too
 -gnome-user-docs
--gnome-getting-started-docs
 -desktop-backgrounds-basic
 -*backgrounds-extras
 

fedora-soas-common.ks

@@ -30,7 +30,7 @@ firewall --enabled --service=mdns,presence
 -abrt-cli
 -ibus*
 -hyperv-daemons
--webkit2gtk3-plugin-process-gtk2
+-webkitgtk4-plugin-process-gtk2
 
 # Add some extra fonts
 dejavu-sans-fonts

fedora-workstation-common.ks

@@ -20,6 +20,9 @@
 @printing
 @workstation-product
 
+# Branding for the installer
+fedora-productimg-workstation
+
 # Exclude unwanted packages from @anaconda-tools group
 -gfs2-utils
 -reiserfs-utils

fedora-xfce-common.ks

@@ -27,8 +27,10 @@ gnome-keyring-pam
 # Note that blank is still default.
 xscreensaver-extras
 wget
+# Handy for debugging
+rfkill
 # Better more popular browser
-#firefox
+firefox
 system-config-printer
 
 # save some space
@@ -36,8 +38,8 @@ system-config-printer
 -acpid
 -gimp-help
 -desktop-backgrounds-basic
+-PackageKit*                # we switched to dnfdragora, so we don't need this
 -aspell-*                   # dictionaries are big
 -xfce4-sensors-plugin
--foomatic-db-ppds
 
 %end