Merge #447 Remove exclusion of iproute-tc from fedora-arm-base.

In the vagrant kickstarts we had something like

 %include fedora-atomic-vagrant.ks
 %include fedora-atomic-updates.ks

but both fedora-atomic-updates.ks and fedora-atomic-vagrant.ks
included fedora-atomic.ks which means we got duplicate things
in the flattened ks and we get errors. This splits it out a bit
farther so we don't get duplicates.

fedora-arm-base.ks

@@ -6,15 +6,14 @@ firewall --enabled --service=mdns,ssh
 
 bootloader --location=mbr
 
-part /boot/fw --size=30 --fstype vfat --asprimary
+part /boot/efi --size=80 --fstype vfat --asprimary
 part /boot --size=512 --fstype ext4 --asprimary
-part swap --size=512 --fstype swap --asprimary
 part / --size=2800 --fstype ext4 --asprimary
 
 # make sure that initial-setup runs and lets us do all the configuration bits
 firstboot --reconfig
 
-services --enabled=sshd,NetworkManager,avahi-daemon,rsyslog,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup,zram-swap
 
 %include fedora-repo.ks
 
@@ -22,6 +21,7 @@ services --enabled=sshd,NetworkManager,avahi-daemon,rsyslog,chronyd,initial-setu
 @core
 @standard
 @hardware-support
+zram
 
 kernel
 # remove this in %post
@@ -39,7 +39,6 @@ initial-setup-gui
 -iwl*
 -ipw*
 -usb_modeswitch
--iproute-tc
 #lets resize / on first boot
 # dracut-modules-growroot
 
@@ -51,10 +50,8 @@ glibc-all-langpacks
 %post
 
 # Setup Raspberry Pi firmware
-cp -Pr /usr/share/bcm283x-firmware/* /boot/fw/
-cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/fw/rpi2-u-boot.bin
-cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/fw/rpi3-u-boot.bin
-sed -i '/vfat/ d' /etc/fstab
+cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
+cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
 
 # work around for poor key import UI in PackageKit
 rm -f /var/lib/rpm/__db*

fedora-arm-minimal.ks

@@ -2,7 +2,6 @@
 %include fedora-minimal-common.ks
 
 part /boot --size=512 --fstype ext4
-part swap --size=256 --fstype swap
 part / --size=1256 --fstype ext4
 
 %packages

fedora-atomic-testing-base.ks

@@ -0,0 +1,27 @@
+
+# ./fedora-atomic-testing-base.ks - for building media from the testing
+# refs (fedora/29/${basearch}/testing/atomic-host)
+
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/atomic/repo/ --ref=fedora/29/${basearch}/testing/atomic-host
+
+%post --erroronfail
+# Find the architecture we are on
+arch=$(uname -m)
+# Set the origin to the "main stable ref", distinct from /testing/ which is where bodhi writes.
+# We want consumers of this image to track the two week releases.
+ostree admin set-origin --index 0 fedora-atomic https://dl.fedoraproject.org/atomic/repo/ "fedora/29/${arch}/atomic-host"
+
+# Make sure the ref we're supposedly sitting on (according
+# to the updated origin) exists.
+ostree refs "fedora-atomic:fedora/29/${arch}/testing/atomic-host" --create "fedora-atomic:fedora/29/${arch}/atomic-host"
+
+# Remove the old ref so that the commit eventually gets
+# cleaned up.
+ostree refs "fedora-atomic:fedora/29/${arch}/testing/atomic-host" --delete
+
+# delete/add the remote with new options to enable gpg verification
+# and to point them at the cdn url
+ostree remote delete fedora-atomic
+ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-primary fedora-atomic 'https://dl.fedoraproject.org/atomic/repo/'
+
+%end

fedora-atomic-testing.ks

@@ -0,0 +1,6 @@
+
+# ./fedora-atomic-testing.ks - for building base cloud media 
+# from the testing refs (fedora/29/${basearch}/testing/atomic-host)
+
+%include fedora-atomic.ks
+%include fedora-atomic-testing-base.ks

fedora-atomic-updates-base.ks

@@ -0,0 +1,27 @@
+
+# ./fedora-atomic-updates-base.ks - for building media from the updates
+# refs (fedora/29/${basearch}/updates/atomic-host)
+
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/atomic/repo/ --ref=fedora/29/${basearch}/updates/atomic-host
+
+%post --erroronfail
+# Find the architecture we are on
+arch=$(uname -m)
+# Set the origin to the "main stable ref", distinct from /updates/ which is where bodhi writes.
+# We want consumers of this image to track the two week releases.
+ostree admin set-origin --index 0 fedora-atomic https://dl.fedoraproject.org/atomic/repo/ "fedora/29/${arch}/atomic-host"
+
+# Make sure the ref we're supposedly sitting on (according
+# to the updated origin) exists.
+ostree refs "fedora-atomic:fedora/29/${arch}/updates/atomic-host" --create "fedora-atomic:fedora/29/${arch}/atomic-host"
+
+# Remove the old ref so that the commit eventually gets
+# cleaned up.
+ostree refs "fedora-atomic:fedora/29/${arch}/updates/atomic-host" --delete
+
+# delete/add the remote with new options to enable gpg verification
+# and to point them at the cdn url
+ostree remote delete fedora-atomic
+ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-primary fedora-atomic 'https://dl.fedoraproject.org/atomic/repo/'
+
+%end

fedora-atomic-updates.ks

@@ -0,0 +1,6 @@
+
+# ./fedora-atomic-updates.ks - for building base cloud media 
+# from the updates refs (fedora/29/${basearch}/updates/atomic-host)
+
+%include fedora-atomic.ks
+%include fedora-atomic-updates-base.ks

fedora-atomic-vagrant-testing.ks

@@ -0,0 +1,6 @@
+
+# ./fedora-atomic-vagrant-testing.ks - for building media from the testing
+# refs (fedora/29/${basearch}/testing/atomic-host) for vagrant
+
+%include fedora-atomic-vagrant.ks
+%include fedora-atomic-testing-base.ks

fedora-atomic-vagrant-updates.ks

@@ -0,0 +1,6 @@
+
+# ./fedora-atomic-vagrant-updates.ks - for building media from the updates
+# refs (fedora/29/${basearch}/updates/atomic-host) for vagrant
+
+%include fedora-atomic-vagrant.ks
+%include fedora-atomic-updates-base.ks

fedora-atomic.ks

@@ -58,7 +58,7 @@ logvol / --size=3000 --grow --fstype="xfs" --name=root --vgname=atomicos
 
 # Equivalent of %include fedora-repo.ks
 # Pull from the ostree repo that was created during the compose
-ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/atomic/repo/ --ref=fedora/rawhide/${basearch}/atomic-host
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/compose/atomic/repo/ --ref=fedora/29/${basearch}/atomic-host
 
 reboot
 

fedora-cinnamon-common.ks

@@ -11,8 +11,9 @@
 @networkmanager-submodules
 @cinnamon-desktop
 @libreoffice
+parole
 
 # extra backgrounds
-f28-backgrounds-extras-gnome
+f29-backgrounds-extras-gnome
 
 %end

fedora-cloud-base.ks

@@ -15,9 +15,9 @@
 # For a TDL file, I store one here:
 # https://pagure.io/fedora-atomic/raw/master/f/fedora-atomic-rawhide.tdl
 # (Koji generates one internally...what we really want is Koji to publish it statically)
-# 
+#
 # Once you have imagefactory and imagefactory-plugins installed, run:
-# 
+#
 #   curl -O https://pagure.io/fedora-atomic/raw/master/f/fedora-atomic-rawhide.tdl
 #   tempfile=$(mktemp --suffix=.ks)
 #   ksflatten -v F22 -c fedora-cloud-base.ks > ${tempfile}
@@ -75,7 +75,6 @@ which
 # Need to also add back plymouth in order to mask failure of
 # systemd-vconsole-setup.service. BZ#1272684. Comment out for now
 #-plymouth
--NetworkManager
 -iprutils
 # Now that BZ#1199868 is fixed kbd really gets removed but it breaks
 # systemd-vconsole-setup.service on boot. Comment out for now
@@ -241,10 +240,10 @@ dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
 rm -f /var/tmp/zeros
 echo "(Don't worry -- that out-of-space error was expected.)"
 
-# When we build the image with oz, dracut is used 
-# and sets up a ifcfg-en<whatever> for the device. We don't 
-# want to use this, we use eth0 so it is always the same. 
-# So we remove all these ifcfg-en<whatever> devices so 
+# When we build the image with oz, dracut is used
+# and sets up a ifcfg-en<whatever> for the device. We don't
+# want to use this, we use eth0 so it is always the same.
+# So we remove all these ifcfg-en<whatever> devices so
 # The 'network' service can come up cleanly.
 rm -f /etc/sysconfig/network-scripts/ifcfg-en*
 

fedora-disk-base.ks

@@ -14,7 +14,7 @@ timezone US/Eastern
 auth --useshadow --passalgo=sha512
 selinux --enforcing
 firewall --enabled --service=mdns
-services --enabled=sshd,NetworkManager,chronyd
+services --enabled=sshd,NetworkManager,chronyd,zram-swap
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -33,6 +33,7 @@ firstboot --reconfig
 @core
 @standard
 @hardware-support
+zram
 
 kernel
 # remove this in %post
@@ -45,11 +46,10 @@ rng-tools
 chrony
 bcm283x-firmware
 initial-setup
+# Intel wireless firmware assumed never of use for disk images
 -iwl*
 -ipw*
--trousers-lib
 -usb_modeswitch
--iproute-tc
 -generic-release*
 
 # make sure all the locales are available for inital0-setup and anaconda to work
@@ -60,8 +60,6 @@ glibc-all-langpacks
 %post
 
 # Setup Raspberry Pi firmware
-cp -Pr /usr/share/bcm283x-firmware/* /boot/efi/
-mv -f /boot/efi/config-64.txt /boot/efi/config.txt
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 
 releasever=$(rpm -q --qf '%{version}\n' fedora-release)

fedora-disk-minimal.ks

@@ -1,9 +1,9 @@
 %include fedora-disk-base.ks
 %include fedora-minimal-common.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
 
-autopart --type=plain
+autopart --type=plain --noswap
 
 %packages
 -xkeyboard-config

fedora-disk-server.ks

@@ -1,14 +1,17 @@
 %include fedora-disk-base.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
 
-autopart
+autopart --noswap
 
 %packages
-# install the default groups for the server evironment since installing the environment is not working
+# install the default groups for the server environment since installing the environment is not working
 @server-product
 @standard
 @headless-management
+@hardware-support
+@networkmanager-submodules
+
 @container-management
 @domain-client
 -initial-setup-gui

fedora-disk-workstation.ks

@@ -4,9 +4,9 @@
 
 bootloader --append="cma=256MB"
 
-services --enabled=sshd,NetworkManager,chronyd
+services --enabled=sshd,NetworkManager,chronyd,zram-swap
 
-autopart --type=plain
+autopart --type=plain --noswap
 
 %packages
 -initial-setup

fedora-docker-base.ks

@@ -23,6 +23,9 @@ rm -rf /tmp/*
 # https://pagure.io/atomic-wg/issue/308
 printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
 
+# https://bugzilla.redhat.com/show_bug.cgi?id=1576993
+systemctl disable dnf-makecache.timer
+
 #Mask mount units and getty service so that we don't get login prompt
 systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service
 

fedora-iot.ks

@@ -0,0 +1,118 @@
+# This is the kickstart for Fedora IoT disk images.
+
+text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
+lang en_US.UTF-8
+keyboard us
+timezone --utc Etc/UTC
+
+auth --useshadow --passalgo=sha512
+selinux --enforcing
+rootpw --lock --iscrypted locked
+
+# Add most common consoles console=ttyAMA0 console=ttyS0 console=ttyS1 as kernel boot parameter
+bootloader --timeout=1 --append="console=tty1 console=ttyS0,115200n8 console=ttyS1,115200n8 console=ttyAMA0,115200n8 net.ifnames=0 modprobe.blacklist=vc4"
+
+network --bootproto=dhcp --device=link --activate --onboot=on
+services --enabled=NetworkManager,sshd,rngd,initial-setup,zram-swap
+
+# tell Initial Setup to run in the reconfig mode
+firstboot --reconfig --enable
+
+zerombr
+clearpart --all --initlabel --disklabel=msdos
+autopart --nohome --noswap --type=plain
+
+# Equivalent of %include fedora-repo.ks
+# Pull from the ostree repo that was created during the compose
+ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/29/${basearch}/iot
+
+reboot
+
+%post --erroronfail
+# Find the architecture we are on
+arch=$(uname -m)
+
+# Setup Raspberry Pi firmware
+if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
+if [[ $arch == "aarch64" ]]; then
+cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
+else
+cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/fw/rpi2-u-boot.bin
+cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/fw/rpi3-u-boot.bin
+fi
+fi
+
+# Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.
+# We want consumers of this image to track the two week releases.
+ostree admin set-origin --index 0 fedora-iot https://kojipkgs.fedoraproject.org/iot/29/ "fedora/29/${arch}/iot"
+
+# Make sure the ref we're supposedly sitting on (according
+# to the updated origin) exists.
+ostree refs "fedora-iot:fedora/29/${arch}/iot" --create "fedora-iot:fedora/29/${arch}/iot"
+
+# Remove the old ref so that the commit eventually gets cleaned up.
+ostree refs "fedora-iot:fedora/29/${arch}/iot" --delete
+
+# delete/add the remote with new options to enable gpg verification
+# and to point them at the cdn url
+ostree remote delete fedora-iot
+ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-primary fedora-iot 'https://dl.fedoraproject.org/iot/repo/'
+
+# older versions of livecd-tools do not follow "rootpw --lock" line above
+# https://bugzilla.redhat.com/show_bug.cgi?id=964299
+passwd -l root
+
+# Work around https://bugzilla.redhat.com/show_bug.cgi?id=1193590
+cp /etc/skel/.bash* /var/roothome
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# Remove any persistent NIC rules generated by udev
+rm -vf /etc/udev/rules.d/*persistent-net*.rules
+# And ensure that we will do DHCP on eth0 on startup
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+echo "Removing random-seed so it's not the same in every image."
+rm -f /var/lib/systemd/random-seed
+
+echo "Packages within this iot image:"
+echo "-----------------------------------------------------------------------"
+rpm -qa
+echo "-----------------------------------------------------------------------"
+# Note that running rpm recreates the rpm db files which aren't needed/wanted
+rm -f /var/lib/rpm/__db*
+
+echo "Zeroing out empty space."
+# This forces the filesystem to reclaim space from deleted files
+dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
+rm -f /var/tmp/zeros
+echo "(Don't worry -- that out-of-space error was expected.)"
+
+# For trac ticket https://pagure.io/atomic-wg/issue/128
+rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
+
+echo "Adding Developer Mode GRUB2 menu item."
+/usr/libexec/atomic-devmode/bootentry add
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network off
+
+# Anaconda is writing an /etc/resolv.conf from the install environment.
+# The system should start out with an empty file, otherwise cloud-init
+# will try to use this information and may error:
+# https://bugs.launchpad.net/cloud-init/+bug/1670052
+truncate -s 0 /etc/resolv.conf
+
+%end

fedora-kde-common.ks

@@ -5,7 +5,6 @@
 @kde-desktop
 @kde-media
 @kde-office
-@kde-telepathy
 @networkmanager-submodules
 
 ### The KDE-Desktop

fedora-live-base.ks

@@ -95,11 +95,10 @@ livedir="LiveOS"
 for arg in \`cat /proc/cmdline\` ; do
   if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
     livedir=\${arg##rd.live.dir=}
-    return
+    continue
   fi
   if [ "\${arg##live_dir=}" != "\${arg}" ]; then
     livedir=\${arg##live_dir=}
-    return
   fi
 done
 
@@ -154,7 +153,6 @@ findPersistentHome() {
   for arg in \`cat /proc/cmdline\` ; do
     if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
       homedev=\${arg##persistenthome=}
-      return
     fi
   done
 }

fedora-live-cinnamon.ks

@@ -7,7 +7,6 @@
 # - Dan Book <grinnz@grinnz.com>
 
 %include fedora-live-base.ks
-%include fedora-live-minimization.ks
 %include fedora-cinnamon-common.ks
 
 part / --size=6144

fedora-live-minimization.ks

@@ -5,11 +5,8 @@
 
 # save some space
 -mpage
--sox
 -hplip
--numactl
 -isdn4k-utils
--autofs
 
 # scanning takes quite a bit of space :/
 -xsane

fedora-live-soas.ks

@@ -5,8 +5,6 @@
 #
 # Maintainers:
 # - Peter Robinson <pbrobinson AT gmail DOT com>
-# - Sebastian Dziallas <sdz AT fedoraproject DOT org>
-# - Mel Chua <mchua AT fedoraproject DOT org>
 
 %include fedora-live-base.ks
 %include fedora-live-minimization.ks

fedora-lxqt-common.ks

@@ -5,6 +5,7 @@
 #
 # Maintainer(s):
 # – Christian Dersch <lupinix@fedoraproject.org>
+# – Zamir SUN <zsun@fedoraproject.org>
 #
 
 %packages
@@ -26,6 +27,9 @@ pavucontrol-qt-l10n
 # MP3
 gstreamer1-plugin-mpg123
 
+# Editor
+enki
+
 # remove unneeded stuff to get a lightweight system
 # fonts (we make no bones about admitting we're english-only)
 wqy-microhei-fonts          # a compact CJK font, to replace:

fedora-mate-common.ks

@@ -35,7 +35,6 @@ nss-mdns
 # Drop things for size
 -@3d-printing
 -brasero
--colord
 -fedora-icon-theme
 -gnome-icon-theme
 -gnome-icon-theme-symbolic

fedora-minimal-common.ks

@@ -3,6 +3,10 @@
 -initial-setup-gui
 -generic-release*
 -glibc-all-langpacks
+# recommended by iproute, we don't want it in minimal
+-iproute-tc
+# recommended by gnutls, we don't want it in minimal
+-trousers
 glibc-langpack-en
 iw
 NetworkManager-wifi

fedora-modular-disk-minimal.ks

@@ -56,8 +56,6 @@ dhcp-client
 %post
 
 # Setup Raspberry Pi firmware
-#cp -Pr /usr/share/bcm283x-firmware/* /boot/efi/
-mv -f /boot/efi/config-64.txt /boot/efi/config.txt
 cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 
 releasever=$(rpm -q --qf '%{version}\n' fedora-modular-release)

fedora-repo.ks

@@ -3,7 +3,7 @@
 # Exactly one of the following should be uncommented
 
 # For the master branch the following should be uncommented
-%include fedora-repo-rawhide.ks
+#%include fedora-repo-rawhide.ks
 
 # For non-master branches the following should be uncommented
-# %include fedora-repo-not-rawhide.ks
+%include fedora-repo-not-rawhide.ks

fedora-scientific-common.ks

@@ -70,11 +70,14 @@ rkward
 qtoctave
 
 # julia
-julia
-julia-doc
+# Comment out till https://koji.fedoraproject.org/koji/buildinfo?buildID=1135023 is fixed
+# julia
+# julia-doc
 
 # IDEs for the IDE folks
 @eclipse
+# Workaround for: https://pagure.io/releng/issue/7814
+-eclipse-linuxtools-vagrant
 spyder
 
 #writing & publishing

fedora-soas-common.ks

@@ -92,7 +92,7 @@ sugar-logos
 # Rebuild initrd for Sugar boot screen
 KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
 /usr/sbin/plymouth-set-default-theme sugar
-/sbin/dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
+dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
 
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*
@@ -163,6 +163,16 @@ show-logout=false
 [org.sugarlabs.power]
 automatic=true
 EOF
-/usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/sugar.soas.gschema.override
+/usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# For lorax/livemedia-creator builds.
+sed -i '
+/## make boot.iso/ i\
+# Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+<% f = "usr/bin/livecd-iso-to-disk" %>\
+%if exists(f):\
+    install ${f} ${LIVEDIR}/${f|basename}\
+%endif\
+' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
 
 %end

fedora-xfce-common.ks

@@ -38,6 +38,5 @@ system-config-printer
 -desktop-backgrounds-basic
 -aspell-*                   # dictionaries are big
 -xfce4-sensors-plugin
--foomatic-db-ppds
 
 %end

l10n/fedora-live-workstation-ja_JP.ks

@@ -0,0 +1,40 @@
+# fedora-live-workstation-ja_JP.ks
+#
+# Description:
+# - Japanese Fedora Live Spin with the Gnome Desktop Environment
+#
+# Maintainer(s):
+# - Shintaro Fujiwara <shintaro.fujiwara@miraclelinux.com>
+
+%include ../fedora-live-workstation.ks
+
+lang ja_JP.UTF-8
+keyboard jp
+timezone Asia/Tokyo
+
+%packages
+@japanese-support
+# exclude input methods except ibus:
+-m17n*
+-scim*
+-iok
+# ibus stuff
+ibus-kkc
+imsettings
+%end
+
+%post
+cat > /etc/X11/xorg.conf.d/00-keyboard.conf << "EOF"
+# Read and parsed by systemd-localed. It's probably wise not to edit this file
+# manually too freely.
+Section "InputClass"
+        Identifier "system-keyboard"
+        MatchIsKeyboard "on"
+        Option "XkbLayout" "jp"
+        Option "XkbModel" "jp106"
+EndSection
+EOF
+
+gsettings set org.gnome.desktop.input-sources sources "[('ibus', 'kkc'), ('xkb', 'jp')]"
+
+%end

l10n/fedora-livecd-kde-ja_JP.ks

@@ -0,0 +1,40 @@
+# fedora-livecd-kde-ja_JP.ks
+#
+# Description:
+# - Japanese Fedora Live Spin with the KDE Desktop Environment
+#
+# Maintainer(s):
+# - Shintaro Fujiwara <shintaro.fujiwara@miraclelinux.com>
+
+%include ../fedora-live-kde.ks
+
+lang ja_JP.UTF-8
+keyboard jp
+timezone Asia/Tokyo
+
+%packages
+@japanese-support
+# exclude input methods except ibus:
+-m17n*
+-scim*
+-iok
+# ibus-stuff 
+fcitx-qt5
+ibus-kkc
+ibus-mozc
+ibus-qt
+kcm-fcitx
+%end
+
+%post
+cat > /etc/X11/xorg.conf.d/00-keyboard.conf << "EOF"
+# Read and parsed by systemd-localed. It's probably wise not to edit this file
+# manually too freely.
+Section "InputClass"
+        Identifier "system-keyboard"
+        MatchIsKeyboard "on"
+        Option "XkbLayout" "jp"
+        Option "XkbModel" "jp106"
+EndSection
+EOF
+%end

l10n/fedora-livecd-lxde-ja_JP.ks

@@ -14,10 +14,9 @@ timezone Asia/Tokyo
 
 %packages
 @japanese-support
-# exclude input methods:
+# exclude input methods except ibus:
 -m17n*
 -scim*
--ibus*
 -iok
 # Better more popular browser
 firefox